search for: 600va

I'm running NUT 2.6.3 on Debian wheezy [ with a 3.3.0 i686 kernel ] I've installed NUT via Debian APT [ package nut version 2.6.3-1 ] I have a REDi Blazer 600VA (BLAZER600c) UPS and I want to detect power failures. I have tried the following drivers: * gamatronic: Can't talk to UPS on port /dev/ttyS1! * bestups: Unable to detect a Best/SOLA or Phoenix protocol UPS * blazer_ser: No supported UPS detected I have also tried genericups with upstype=4, ups...

The REDi Blazer 600VA (BLAZER600c) UPS found here [ro_RO]: http://www.emag.ro/ups-redi-blazer-600va-blazer600c/pd/EX5X2BBBM/ which is actually a Centralion Blazer 600VA [en_TW]: http://www.centralion.com/html/product/back-Product-ups-blazer400.htm works with the blazer_ser driver ----------shell output---------- # upsr...

Hi, I'm having a hard time configuring a Mustek Powermust 600VA ups to work via USB with nut. I read somewhere that nut works OK via the rs232 cable, but unfortunately I don't have a COM port in my computer. The kernel detects the ups as an Xbox pad :) and loads the xpad module. I tried running /lib/nut/megatec with different /dev/ttySx but it displays me...

...er III : Only serial versions I'll add this to the compatibility list. > /* Known battery types must be in ascending order by "nominal" first, and then by "max". */ > -static BatteryVolts_t batteries[] = {{ 12.0, 9.0, 16.0, 9.7, 13.7, 0.0 }, /* Mustek PowerMust 600VA Plus (LB unknown) */ > +static BatteryVolts_t batteries[] = {{ 12.0, 9.0, 16.0, 9.6 ,13.3 , 9.7 }, /* SMS Ltda confirmed to Sinus Single 2Kva , Manager III 600 and 1300 Va */ > + { 12.0, 9.0, 16.0, 9.7, 13.7, 0.0 }, /* Mustek PowerMust 600VA Plus (LB...

Hi All! This time I'm using Nut 2.2.0, Debian etch and kernel v. 2.6.23.9. My hardware config is quite simple. There are 2 PCs connected to my PowerMust 600VA. One is mensioned above the other is a Windows PC using Winnut 2.0.0b. The Linux PC is connected to the UPS via a serial cable and acts as the server. The problem is that both upsmon and winnut disconnect regularly but in random moments. First I've been using kernel v. 2.6.22.1 and tried upgra...

Greetings: I'm evaluating two replacements for UPS upgrades to my dept. Because the CyberPower OP650 has been retired, we are evaluating the CyberPower600VA and the CyperPower 1000AVRLCD. We will be evaluating others. Initial configuration and communications are established via the usbhid-ups driver, the gambit of tests are all passed with the exception of one. I seem to be failing the power race test. As I understand it the power race test happen...

...tried both the nut port (2.0.5) and the svn trunk but have had no success yet. I am running nut as root to exclude the possibility of permission issues. The testing below is done on the trunk version. My ups.conf: [mge-nova] driver=usbhid-ups port=auto desc="MGE Nova 600VA on Bozo" vendorid = 0463 pollinterval = 30 upsd.conf: ACL all 0.0.0.0/0 ACL localhost 127.0.0.1/32 ACCEPT localhost REJECT all MAXAGE 60 usbdevs -vd: Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 uhub0 port...

...tried both the nut port (2.0.5) and the svn trunk but have had no success yet. I am running nut as root to exclude the possibility of permission issues. The testing below is done on the trunk version. My ups.conf: [mge-nova] driver=usbhid-ups port=auto desc="MGE Nova 600VA on Bozo" vendorid = 0463 pollinterval = 30 upsd.conf: ACL all 0.0.0.0/0 ACL localhost 127.0.0.1/32 ACCEPT localhost REJECT all MAXAGE 60 usbdevs -vd: Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 uhub0 port...

...all, I am new on the lists but using nut on megatec for last two and half years. Looking at archives I saw that there is a lot of people confused about battery voltage and I want to help them to clear out some stuff in their heads. This story is based on my experience with UPS devices from 600VA to 20kVA, from single phase systems to three phase systems, with battery packs from 1 battery to 62 batteries in both technologies interactive (aka stand-by) and on-line (aka double-conversion) but all of them were "speaking" megatec. Anyway this does not necessarily relater only to mega...

...e ever seen (seriously). Secondarily I'd like to help the NUT project as far as my help is needed, I'm not a programmer (by now...) but I would like to help somehow anyway. I have 3 UPS from the same manufacturer by now, the Mustek PowerMust 1000VA Plus, PowerMust 800VA Pro and PowerMust 600VA USB and the first two of these are listed in the NUT's compatibility page as "full compatible" using the "megatec" driver: in fact they perfectly work. I would like to report that also the third one is compatible using the megatec driver, both via RS232 and via USB port. So...

We currently have a 15-phone system using Asterisk, a combination of analog phones/Grandstream HandyTone-286 and Grandstream BT101s, and 4 X100Ps connected to analog lines. The system works well except for the occasional echo problem. I have all the echo parameters configured, removed all the extra incoming analog lines except to the PBX, etc. following all the advice on the wiki and on the

Hi all, I'm thinking buying a UPS Mustek PowerMust 600 USB to shutdown a Linux box on case of power failure. Can I use nut with this UPS without problems? I checked the page http://www.vamos-wentworth.org/upsinfo.html and was only something (incomplete) about Powermust 400 (information from November 2005). Could this be already changed? Thanks in advance.

...or all whom have the Sweex manageable UPS. I got my sweex manageable UPS500VA working with NetworkUPSTools using the ippon driver. Here is my the ups.conf file: [ups] driver = ippon port = /dev/cuad0 desc = "Server" Has anyone tried the ippon driver with Sweex 600VA, 700VA, and 800VA models? Regards, Jan

Hello all, I bought a (very) cheap maxxtro 600VA line interactive ups and i was trying to make it work with nut. Since I thought it was a simple contact closure ups, I tried all genericups drivers but none worked. Some more information about the ups: I connect it with a usb cable (but it also has a serial port) which is seen as a usb to seria...

...Bus 002 Device 010: ID 0665:5161 Cypress Semiconductor USB to Serial Bus 002 Device 003: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 002 Device 002: ID 1c4f:0065 SiGma Micro Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub When I unplug the USB cable from my Easton 5L 600VA USB # lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 003: ID 046d:c31c Logitech, Inc. Keyboard K120 for Business Bus 002 Device 002: ID 1c4f:0065 SiGma Micro Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub So, apparently, my Easton is sending...

...alues for 36V UPS'es will be useful to other models > > than the one I have, too. > > Sounds good, but I don't think I saw it hit the list yet... I now have the following in megatec.c: static BatteryVolts batteries[] = { { 12, 9.0, 16.0, 9.7, 13.7 }, /* Mustek PowerMust 600VA Plus */ { 12, 18.0, 30.0, 18.8, 26.8 }, /* PowerWalker Line-Interactive VI 1000 (LB at 22.3V) */ { 24, 18.0, 30.0, 19.4, 27.4 }, /* Mustek PowerMust 1000VA Plus (LB at 22.2V) */ { 36, 1.5, 3.0, 1.64, 2.31 }, /* Mustek PowerMust 1000VA On-Line (LB at 1.88V) */ { 36, 32.0, 42.0, 33.0, 40....

...they are supposed to, then we would have no problem since the usbhid-ups driver IS autodetecting, all we would have to do is tell people if they have a USB ups, use usbhid-ups But what screws the pooch is that many USB UPSes use their serial protocol over the USB port. Your only working with a 600VA ups plugged into 1 device so you don't understand the issues here. The typical production business may have multiple servers plugged into a large ups. They cannot have the system that the UPS is plugged into, spewing all kinds of different autodetection data strings out the serial port (or U...

...s" "5" "openUPS Intelligent UPS" "USB port" "usbhid-ups" + "Mustek" "ups" "2" "Powermust" "400VA Plus" "blazer_ser" "Mustek" "ups" "2" "Powermust" "600VA Plus" "blazer_ser" "Mustek" "ups" "2" "Powermust" "800VA Pro" "blazer_ser" Index: drivers/openups-hid.h =================================================================== --- drivers/openups-hid.h (revision 0) +++ drivers/...

Hello all, I am trying to set up my brother's UPS (remotely over internet) on an OpenIndiana-based storage box. According to him, the UPS is probably an Ippon Back Power Pro 600 dated around 2003 (battery recently replaced), and it has an USB connection. Sorry for a relatively long post with a log of my successes and failures, in the hopes that someone would point out what I did wrong.