search for: 555

Hi All, While reading about QoS, I came across ${RTPAUDIOQOS} and tried to use it in my dialplan. I had 2 sip extensions 555 and 666 and I called from 555 to 666, but unfortunately no value for ${RTPAUDIOQOS} appeared on Asterisk CLI. Would you please let me know what is wrong with my dialplan and/or what else should be done to get the value of ${RTPAUDIOQOS}? Following is my dialplan context where my call landed.......

Hi, I am trying to dial # or *411, in order to understand what the * box should answer me. In both cases, I only ear "Good-Bye" (italian , "arrivederci") dialing # -- Executing Wait("SIP/555-a2e5", "1") in new stack -- Executing AGI("SIP/555-a2e5", "directory||ext-local|lo") in new stack -- Launched AGI quitScript /var/lib/asterisk/agi-bin/directory -- AGI Script directory completed, returning 0 -- Executing Playback("SIP/555-a2e5...

Hi, I ma using Asterisk 1.2.18 & FreePBX 2.2.1. I have assigned every users in office with Polycom with 2 extensions as below 555 8555 I have configured Follow-me to ring when the users doesn't picks the phone on line 1(555) after 10 seconds & then ring the line 2(8555). But this is not a standard telephony which I have been advised to change like below. If someone calls Ext 555 & its busy(means on a phone with...

My goal is to have only 1 primary phone number that can seamlessly "pool" multiple VoicePulse accounts. Let's say I have 3 accounts with VoicePulse Connect 212-555-1000 (primary) 212-555-1001 212-555-1002 When I receive inbound calls on 212-555-1000, I want to "forward" or "roll over" the connection to 212-555-1001 and 212-555-1002 so that the 212-555-1000 remains open for connections. Theoretically I would like to maintain 11 simultaneo...

Hello everyone, I'm sure someone had an experience arranging hunt-group setup for incoming calls on T1 PRI channels of Digium TE110P card. For instance, I have main DID channel associated with number (555) 222 0001. And I have whole bunch of other DID channels on same T1 card like (555) 222 0090, (555) 222 0091, (555) 222 0093. My goal is when a call comes to the main number which is (555) 222 0001, to have it roll over to the next available T1 channel. Or give busy signal to the caller if all c...

Hello All, Looking for a little guidance on Real Time Pattern Matching. We are attempting to block outbound 411 via when someone dials NXX-555-XXXX, The must common being NXX-555-1212. However, We have some outbound providers that consider any call to NXX-555-XXXX a directory assistance call. So simply making my pattern _NXX5551212 doesn't work. So as you can see from the lines below. If I Dial 321-555-1212 the call is being ap...

Hi all, What''s wrong with the way I specify the condition in : Person.find :all, :conditions => ["phone like ''%:phone%''" , {:phone => "555"}] ? It translates to (note the two '' between the two ") SELECT * FROM people WHERE (phone like "%''555''%" ) instead of SELECT * FROM people WHERE (phone like "%555%" ) Another way to produce this problem: OK : model = "555&...

Hi: I am looking into getting incoming IAX DID channels for our office. I've found a provider. What I want, though, is an incoming hunt group -- that is, say we have three lines: 555 1212 555 1213 555 1214 Calls coming in on 555 1212 may end up on any one of the three. If 555 1212 is busy, the call forwards to 555 1213, and so on. I was under the impression that this has to be done by the carrier or provider, but I want to make sure: if they are IAX channels, is there any way...

...ephony. Is there a barebones TAPI driver that exists that would allow me to call up a command line with, as parameter, the number to dial. For exemple, Outlook integrates with TAPI, so that TAPI driver would allow me to call my own app with the phone number as argument. ex when clicking on 555-555-5555: the TAPI driver would call "customapp.exe 555-555-5555" Regards, Michael -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100526/7579c4f1/attachment.htm

Hello All, I have 4 X100P cards. I was hoping to have card (line) go to separate ext. i.e. Card 1 (XXX)555-0001 My Ext Card 2 (XXX)555-0002 Wife's Ext Card 3 (XXX)555-0003 Fax Ext Card 4 (XXX)555-0004 My and Wife Ext. This is what I have now and all incoming line rings this one extension. exten => s,1,Dial(SIP/300,10) So what is "s" . Thanks, David -- This message has been scanned...

What's going on here? 555* seems to indicate that the number is being passed as the callerID because NoOp says the phone number. I'm trying to emulate cell phone voicemail where you call your own number to check your voicemail. -- Accepting AUTHENTICATED call from 65.182.165.XXX: > requested forma...

http://bugzilla.mindrot.org/show_bug.cgi?id=555 Summary: If user does a newgrp before envoking ssh, it fails with a setgid error. Product: Portable OpenSSH Version: older versions Platform: UltraSparc OS/Version: Solaris Status: NEW Severity: normal...

...have a requirement that each employee should have **SIP phone at home, SIP phone in office, cell phone with same user. * *I want all those 3 phones to be ?one extension?. So, if someone calls our company number and dials my extension - I?d like 3 phones to ring at the same time.* *e.g. Extension 555 for all the places and when anyone dial the extension 555 then it should ring at all the places simultaneously and user can pick any extension as desired.* *Help Please.* -- Thanks & Regards. AVANISH 8802737939 -------------- next part -------------- An HTML attachment was scrubbed... URL:...

Hi, I am trying to send "404 Not found" reply, without any luck with the following: exten => 555,1,Playback(you-dialed-wrong-number,noanswer) exten => 555,n,Playback(check-number-dial-again,noanswer) exten => 555,n,Congestion() However the above results in "500 Service Unavailable" being send out. What would be the correct application/function to generate "404 Not found&...

Does anyone know of a way to specify what extension is dialed when 0 is pressed in the voicemail system. I have a situation where there is more than one secretary and they want the 0 to redirect to the appropriate secretary for the two groups of people. So an example would be: 555-1234 -> voicemail -> Secretary 1 555-1235 -> voicemail -> Secretary 2 Any help would be greatly appreciated.

..."-").chomp("-")}/#{id}''>clck here<\/a>" @body[:company_name] = "#{company}" @body[:sender_name] = "#{sender}" content_type "text/html" end If I submit an email id, It is giving error as (Net::SMTPFatalError) "555 5.5.2 Syntax error. d29sm1994943and.38\n" How to avoid this error Please help me its urgent. -- Posted via http://www.ruby-forum.com/.

Hi Folks I have had a look through the Features list, and I see that the system does support an auto attendant, however is it possible to have say 5 telephone numbers that a person would dial and have 5 different messages I.e Dial 555-1121 and you get a message for companyA call centre Dial 555-1131 and you get a message for companyB call centre Dial 555-1141 and you get a message for companyC call centre etc. etc. Once you have listened to the message welcome to blah blah your call is important etc etc. you are put through to...

Hi, I'm using asterisk 1.4.22-4 in Trixbox with snom 360 phones. When calls come in on our POTS lines, the caller id shows up like "555-555-1234 at 192.168.1.10" where 555-555-1234 is the correct phone number and 192.168.1.10 is my pbx server IP. This format does not work for redialing on outbound calls. While there may be an outbound dialing change that could be made, it seems like the correct solution would be to chan...

...NULL default '0', `regseconds` int(11) NOT NULL default '0', PRIMARY KEY (`name`) ) TYPE=MyISAM then i put sip.conf [general] hostname=localhost dbname=asterisk table= sipfriends password=ahmed user=root then i insert in sql this statment insert into sipfriends values ('555','555','1234','555','192.168.50.149',5060,2); i tried from Xlite to register with 555 but i couldn't any help please -- Ahmed Magdy Mahmoud -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/ast...

Hi, I`m having a problem I cannot explain. When dialing 555-555-5555 (for example), I get a ringing sound until the person answers. When I have my Polycom forwarded to 555-555-5555, I do not get the ringing, but it dials fine and eventually when the person answers everything works fine. Where could be the difference? Both are using the same context to...