Displaying 20 results from an estimated 78 matches for "5350".
Did you mean:
350
2004 Dec 09
0
Asterisk and Cisco 5350 - config ?
I would like to try and use a surplus (decommissioned) Cisco AS5350 with
Asterisk. Bascially the 5350 will connect to the PRIs and send the calls
to asterisk (and likewise for calls from Asterisk to the PSTN). The 5350
has both PRIs and DSPs, so it should be suitable.
Has anyone done this before and have a config (for both the 5350 and
asterisk) that they ca...
2004 Jul 14
1
Questing regardning dialplans on a Cisco 5350
Hi.
If I use a Cisco as a PSTN termination GW and need to route all incoming
isdn calls to my asterisk and all outgoing calls from asterisk via the
cisco out to pstn, how do I do that ?
in the cisco I have this:
dial-peer voice 1 pots
destination-pattern [0-9]T
no digit-strip
direct-inward-dial
port 3/0:D
!
dial-peer voice 50 voip
destination-pattern [0-9]
voice-class codec 1
session
2016 May 16
3
Black screen after install / Centos 7.2
Hi, i just installed CentOS 7.2 on my little "server" but i get a black
screen during boot. It is a Asrock Am1h-itx mainboard with an AMD 5350
CPU (onboard graphic).
I created a raid 6 but i dont think thats the problem, as the boot
process goes pretty far. I would even say its going until X should
start, but it is a server install, so i guess there is no X.
Can someone tell me what could i do to get more information? Is there
some ki...
2005 Oct 11
3
Dual PRI fail over
I currently have a single PRI however we are getting a second PRI, and the
provider (qwest) wants to know if our PBX supports GSAS (they say its a
redundant d-channel technology but searching on google for GSAS reveals less
than nothing). I've set something similar up before on a cisco 5350, where if
one of the PRIs fails, all of the calls destined for either PRI will be routed
down the one that didn't fail. Basically the 2 PRIs are bonded together, and
act as one. During normal operation the calls come down each PRI in a load
balanced fashion (IE if I've got 30 calls up, 15...
2006 Dec 04
2
Library file for the R engine in Windows?
...ming book mentions that a library Rdll.lib needs to be built
from source, but I am not sure
if this is still the recommended route.
I am using Microsoft Visual C++ Toolkit in Windows XP Pro.
Thank you for any advice.
Christos Hatzis, Ph.D.
Nuvera Biosciences, Inc.
400 West Cummings Park
Suite 5350
Woburn, MA 01801
Tel: 781-938-3830
www.nuverabio.com <http://www.nuverabio.com/>
[[alternative HTML version deleted]]
2007 Dec 11
5
book on regular expressions
...on regular expressions with focus on
applications/use as it might relate to R. I remember there was a mention of
such a reference book recently, but I could not locate that message on the
archive.
Thanks.
-Christos
Christos Hatzis, Ph.D.
Nuvera Biosciences, Inc.
400 West Cummings Park
Suite 5350
Woburn, MA 01801
Tel: 781-938-3830
www.nuverabio.com <http://www.nuverabio.com/>
[[alternative HTML version deleted]]
2006 Dec 24
2
how to 'get' an object that is part of a list
...t; my.length(xx$a)
Error in get(x, envir, mode, inherits) : variable "xx$a" was not found
> my.length(xx$a, xx$b)
Error in get(x, envir, mode, inherits) : variable "xx$a" was not found
Thank you.
Christos Hatzis, Ph.D.
Nuvera Biosciences, Inc.
400 West Cummings Park
Suite 5350
Woburn, MA 01801
Tel: 781-938-3830
www.nuverabio.com
2004 Sep 17
2
Error in zapata/zaptel configuration
...R2 signaling ( which I know is incomplete but should I not see it when I debug Zap channel?). I think there is a problem with my Zapata and zaptel configs . I understand that R2 can work with R2 China and R2 Argentina. Currently am working with R2 Argentina. The E1 is ok as when I configure a Cisco 5350 to work with it, it works perfectly.
Here is my current configuration
zapata.conf
[channels]
context=default
signalling=r2
r2country=ar
group=1
callgroup=1
pickupgroup=1
transfer=yes
echocancel=yes
callprogress=yes
immediate=yes
channel => 1-15,17-31
/etc/zaptel
span=1,0,0,cas,hdb3
ca...
2007 Jun 04
0
Same scale on different q-q plots
...f()
Is there anything that I can do to produce several q-q plots from
different data and put them in the same scale, say x-values in (0-50) and
y-values in (0-50)?
Thank you to all in advance
--
Dr. Enrique Hern?ndez Lemus
Medical Sciences Researcher "B"
Computational Genomics
Phone: 5350-1970
Fax: 5350-1999
Email: ehernandez at inmegen.gob.mx
2007 May 16
2
'attach workspace' on R console File menu
...ing workspaces, e.g.
--------------------
Attach Workspace...
Load Workspace...
Save Workspace...
--------------------
Is this something that could make the wish list for future R Console
features?
Thanks.
-Christos
Christos Hatzis, Ph.D.
Nuvera Biosciences, Inc.
400 West Cummings Park
Suite 5350
Woburn, MA 01801
Tel: 781-938-3830
www.nuverabio.com <http://www.nuverabio.com/>
2006 Oct 24
2
Plotmath expression
...use it inside the expression but that did not work either:
ll.txt <- paste(ll, collapse="+/-")
text(x=9, y=2, pos=2, expression(paste(X[min], "=", ll.txt)))
Any help is much appreciated.
Thanks.
Christos Hatzis, Ph.D.
Nuvera Biosciences, Inc.
400 West Cummings Park
Suite 5350
Woburn, MA 01801
Tel: 781-938-3830
www.nuverabio.com
2007 Feb 01
3
Lining up x-y datasets based on values of x
...w[ xx >= x[1,1] & xx <= x[10,1], 2 ] <- x[,2]
w[ xx >= y[1,1] & xx <= y[10,1], 3 ] <- y[,2]
w[ xx >= z[1,1] & xx <= z[10,1], 4 ] <- z[,2]
w
I appreciate any pointers.
Thanks.
Christos Hatzis, Ph.D.
Nuvera Biosciences, Inc.
400 West Cummings Park
Suite 5350
Woburn, MA 01801
Tel: 781-938-3830
www.nuverabio.com
2006 Mar 28
1
Squished faxes with txfax
...erestingly it is perfectly repeatable, which seems to rule out timing
related issues.
My configuration is:
Asterisk SVN-branch-1.2-r7337M
spandsp-0.0.2pre21 ( though I have tried a 0.0.3 snapshot as well as
0.0.2pre25 )
libtiff 3.8.0-3
I am sending the fax out from Asterisk over a E1 to a Cisco 5350, which then
is sending t.38 out to the terminating carrier. The fax completes every
attempt, so it doesn't appear to be IP related, and as I mentioned before,
the fax on the receiving end always looks almost exactly the same.
Also, if I send a fax with a vertical bar down one side the imag...
2016 May 16
1
Black screen after install / Centos 7.2
Earl A Ramirez wrote:
> On 16 May 2016 12:13, "Oliver Zemann" <oliver.zemann at gmail.com> wrote:
>>
>> Hi, i just installed CentOS 7.2 on my little "server" but i get a black
> screen during boot. It is a Asrock Am1h-itx mainboard with an AMD 5350 CPU
> (onboard graphic).
>> I created a raid 6 but i dont think thats the problem, as the boot
> process goes pretty far. I would even say its going until X should start,
> but it is a server install, so i guess there is no X.
>> Can someone tell me what could i do to get more...
2004 Sep 14
3
Fw: Asterisk R2 Signaling
Has anyone found a solution for asterisk and r2 signaling ? Steve Underwood had given some information saying he had a working asterisk working. I need it to work with Argentina R2 signaling
Sam
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040915/3289f694/attachment.htm
2009 Jul 16
1
H323 situation
...The outgoing calls from sip to H323 are ok.
I also tested an incoming call from a dahdi channel and from here everything
is ok, only one rtp stream and a good call.
By the way I had other problem that I fixed, but don't know if it was in the
best way.
The h323 box is a Cisco AS5300 (or 5350?) and when I was making outgoing
calls the AS disconnected all of them after 10 sec.
I investigated I noticed that the AS as a limitation to the G711 payload to
20 ms, and asterisk was using 150 ms. I resolve this changing in frame.c the
codec value and recompile asterisk. There is simpler way t...
2003 Dec 19
1
problem with rm.impute of the Design library
...40, 4650, NA, 5320, 4510, 4910, 4960, 4420, 5150),
y3<-c(6720, 6040, 6240, 5550, 6610, 6850, 6760, 6370, 6030, NA, 6880,
5330, 5700, NA, 6220, 5240, 5850, 5960, 4910, 5550),
y4<-c(7640, 6840, 6900, 6010, 7780, 7650, 7610, 7000, NA, NA, 7720,
5990, 6340, NA, 7360, 5910, 6310, NA, 5350, 5880)),
last=c(4, 4, 4, 4, 4, 4, 4, 4, 3, 2, 4, 4, 4, 1, 4, 4, 4, 3, 4, 4))
imp.df <- rm.impute(pformula = ~ pre+pro+sex, y = df$y, last = df$last,
rformula = ~ pre+pro+sex, n.impute = 2, data = df)
Here the error:
> imp.df <- rm.impute(pformula = ~ pre+pro+sex, y = df$y, last = df$l...
2007 Feb 07
2
blank upper or lower triangle of cor-matrix
Dear altogether,
I want to blank the lower (or upper) part of a correlation matrix as it
is done by dist()
example:
( d <- cor(matrix(runif(12),nrow=4)) )
If I do the following
d[lower.tri(d)] <- ""
of course everything is changed to character - that's not what should be.
Additionally, it does not work to assign "0" or anything else. The same
is true for
2006 Nov 20
2
predict.coxph
Hi everyone,
Can anyone give me more details about the 'lp', 'risk', 'terms', and 'expected'
options from the predict.coxph function?
I actually found that risk is obtained from exp(lp). I can't find information on
'expected' type however. Is anybody can expand the information on this function?
Thank you in advance, I will appreciate it.
2004 Jun 08
4
AS5300 and Asterisk
Hey all,
I have an as5300 I use for dial in customers, we have 4 PRIs on it.
We have a few free channels on it. I'm wondering if I setup SIP on the
as5300 I can have asterisk use the free channels for dial out.
I'd still have to use my TDM04B for incoming calls, but at least I can
expand my outgoing.
Anyone done anything like this before? I've never messed with VoIP on
Cisco