Has anyone found a solution for asterisk and r2 signaling ? Steve Underwood had given some information saying he had a working asterisk working. I need it to work with Argentina R2 signaling Sam -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040915/3289f694/attachment.htm
I've seen a lot of times, people that try to get R2 MFC to *, most of them trying to use Dialogic Boards (BTW They 're Very expensive), none of them where succesfully, If you want to use PCI Cards on your server, why don?t u ask to your carrier to provide you E1/PRI? or better put a Gateway with E1s and SIP. I'm in Argentina also and I get PRI E1s from some of the Carriers ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Sam Njenga Sent: Wednesday, September 15, 2004 3:48 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Fw: Asterisk R2 Signaling Has anyone found a solution for asterisk and r2 signaling ? Steve Underwood had given some information saying he had a working asterisk working. I need it to work with Argentina R2 signaling Sam -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040915/85be2941/attachment.htm
I have a digium D300-E1 card and the R2 link ready. Actually it is already connected to the card and all alarms cleared. Am not in Argentina but the R2 signaling is configured with Argentina signaling. It works very well when I connect a Cisco 5350 and configure it to Argentina R2 . Am not a developer so if you have a ready I'd be glad to have it . Regards Sam Njenga -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040920/3a8c4bb1/attachment.htm
Date: Mon, 20 Sep 2004 21:35:31 +0800 From: Steve Underwood <steveu@coppice.org> Subject: Re: [Asterisk-Users] Re: Fw: Asterisk R2 Signaling To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users@lists.digium.com> Message-ID: <414EDCA3.4050502@coppice.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Sam Njenga wrote:> I have a digium D300-E1 card and the R2 link ready. Actually it is > already connected to the card and all alarms cleared. Am not in > Argentina but the R2 signaling is configured with Argentina signaling. > It works very well when I connect a Cisco 5350 and configure it to > Argentina R2 . Am not a developer so if you have a ready I'd be glad > to have it . > > Regards > Sam NjengaThere is no support in * for the D300-E1. Regards, Steve Actually the card is Digium Wildcard E100P E1/PRA Card -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040920/3f8fc19b/attachment.htm