Hi
I have reason to believe that I have errors in my configuration because when I
make a call I can see the H323 call executed ok but not being processed by Zap.
I am using R2 signaling ( which I know is incomplete but should I not see it
when I debug Zap channel?). I think there is a problem with my Zapata and zaptel
configs . I understand that R2 can work with R2 China and R2 Argentina.
Currently am working with R2 Argentina. The E1 is ok as when I configure a Cisco
5350 to work with it, it works perfectly.
Here is my current configuration
zapata.conf
[channels]
context=default
signalling=r2
r2country=ar
group=1
callgroup=1
pickupgroup=1
transfer=yes
echocancel=yes
callprogress=yes
immediate=yes
channel => 1-15,17-31
/etc/zaptel
span=1,0,0,cas,hdb3
cas=1-15:1001
cas=17-31:1001
Extentions.conf
[general]
static=yes
writeprotect=no
[globals]
CONSOLE=Console/dsp ; Console interface for demo
IAXINFO=guest ; IAXtel username/password
TRUNK=Zap/1 ; Trunk interface
[local]
include => default
[default]
exten => 203755343,1,Dial(Zap/g1/203755343)
The error I get is
Sep 17 14:18:20 WARNING[1185515456]: pbx.c:1839 ast_pbx_run: Timeout, but no
rule 't' in context 'default'
-- Executing Dial("H323/ip$80.247.147.146:3852/19860",
"Zap/g1/203755343") in new stack
-- Couldn't call g1/203755343
-- Hungup 'Zap/1-1'
h323 --> Asterisk ---> h323 works ok
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040917/cb176535/attachment.htm
Hi
I have reason to believe that I have errors in my configuration because when I
make a call I can see the H323 call executed ok but not being processed by Zap.
I am using R2 signaling ( which I know is incomplete but should I not see it
when I debug Zap channel?). I think there is a problem with my Zapata and zaptel
configs . I understand that R2 can work with R2 China and R2 Argentina.
Currently am working with R2 Argentina. The E1 is ok as when I configure a Cisco
5350 to work with it, it works perfectly.
Here is my current configuration
zapata.conf
[channels]
context=default
signalling=r2
r2country=ar
group=1
callgroup=1
pickupgroup=1
transfer=yes
echocancel=yes
callprogress=yes
immediate=yes
channel => 1-15,17-31
/etc/zaptel
span=1,0,0,cas,hdb3
cas=1-15:1001
cas=17-31:1001
Extentions.conf
[general]
static=yes
writeprotect=no
[globals]
CONSOLE=Console/dsp ; Console interface for demo
IAXINFO=guest ; IAXtel username/password
TRUNK=Zap/1 ; Trunk interface
[local]
include => default
[default]
exten => 203755343,1,Dial(Zap/g1/203755343)
The error I get is
Sep 17 14:18:20 WARNING[1185515456]: pbx.c:1839 ast_pbx_run: Timeout, but no
rule 't' in context 'default'
-- Executing Dial("H323/ip$80.247.147.146:3852/19860",
"Zap/g1/203755343") in new stack
-- Couldn't call g1/203755343
-- Hungup 'Zap/1-1'
h323 --> Asterisk ---> h323 works ok
Regards
Sam
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040917/e64a0dd0/attachment.htm
Hi
I have reason to believe that I have errors in my configuration because when I
make a call I can see the H323 call executed ok but not being processed by Zap.
I am using R2 signaling ( which I know is incomplete but should I not see it
when I debug Zap channel?). I think there is a problem with my Zapata and zaptel
configs . I understand that R2 can work with R2 China and R2 Argentina.
Currently am working with R2 Argentina. The E1 is ok as when I configure a Cisco
5350 to work with it, it works perfectly.
Here is my current configuration
zapata.conf
[channels]
context=default
signalling=r2
r2country=ar
group=1
callgroup=1
pickupgroup=1
transfer=yes
echocancel=yes
callprogress=yes
immediate=yes
channel => 1-15,17-31
/etc/zaptel
span=1,0,0,cas,hdb3
cas=1-15:1001
cas=17-31:1001
Extentions.conf
[general]
static=yes
writeprotect=no
[globals]
CONSOLE=Console/dsp ; Console interface for demo
IAXINFO=guest ; IAXtel username/password
TRUNK=Zap/1 ; Trunk interface
[local]
include => default
[default]
exten => 203755343,1,Dial(Zap/g1/203755343)
The error I get is
Sep 17 14:18:20 WARNING[1185515456]: pbx.c:1839 ast_pbx_run: Timeout, but no
rule 't' in context 'default'
-- Executing Dial("H323/ip$80.247.147.146:3852/19860",
"Zap/g1/203755343") in new stack
-- Couldn't call g1/203755343
-- Hungup 'Zap/1-1'
h323 --> Asterisk ---> h323 works ok
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040917/6d1ced2d/attachment.htm