search for: 500kbps

Hi, I was checking for bit rates support above 500kbps in the libvorbis code, so I tried to encode ogg files with bitrate 576kbps but the encoder OggdropXpd gives maximum bit rate of only 500kbps. Does the Vorbis audio support bit rate 576 kbps? Thanks, Emima -------------- next part -------------- An HTML attachment was scrubbed... URL: http://...

..... (policy is very simple ^^;;) I tried HTB simulator ''Ethloop'' with lo (loopback ) and I found HTB works well....(very well) So I changed lo to eth0 and tested .. ./tc qdisc add dev eth0 root handle 1: htb default 10 ./tc class add dev eth0 parent 1: classid 1:1 htb rate 500kbps ceil 500kbps ./tc class add dev eth0 parent 1:1 classid 1:2 htb rate 180kbps ceil 500kbps ./tc class add dev eth0 parent 1:2 classid 1:10 htb rate 150kbps ceil 500kbps prio 2 ./tc class add dev eth0 parent 1:2 classid 1:11 htb rate 5kbps ceil 10kbps prio 2 ./tc class add dev eth0 parent 1:1 clas...

..... (policy is very simple ^^;;) I tried HTB simulator ''Ethloop'' with lo (loopback ) and I found HTB works well....(very well) So I changed lo to eth0 and tested .. ./tc qdisc add dev eth0 root handle 1: htb default 10 ./tc class add dev eth0 parent 1: classid 1:1 htb rate 500kbps ceil 500kbps ./tc class add dev eth0 parent 1:1 classid 1:2 htb rate 180kbps ceil 500kbps ./tc class add dev eth0 parent 1:2 classid 1:10 htb rate 150kbps ceil 500kbps prio 2 ./tc class add dev eth0 parent 1:2 classid 1:11 htb rate 5kbps ceil 10kbps prio 2 ./tc class add dev eth0 parent 1:1 clas...

...need to assign traffic to users so I make classes, like: tc qdisc add dev eth1 root handle 1: htb tc class add dev eth1 parent 1: classid 1:1 htb rate 900kbps ceil 900kbps tc class add dev eth1 parent 1:1 classid 1:10 htb rate 30kbps ceil 500kbps tc class add dev eth1 parent 1:10 classid 1:11 htb rate 10kbps ceil 10kbps tc class add dev eth1 parent 1:10 classid 1:12 htb rate 30kbps ceil 50kbps .... and now I have very big pro...

...4 flowid 1:1 # upload tc filter add dev eth0 parent 1: protocol ip prio 16 u32 \ match ip src 10.0.1.0/24 flowid 1:1 Problem is when I try to measure traffic with ntop (www.ntop.org), it is seen that overall traffic which that ip block limited to is much higher then 64kbit, actually it is about 500Kbps which signifies that tc do not limit properly. What could be the reason of this inconsistancy? How could I limit 64 Kbps? Is the above configuration correct? Many thanks for any kind of comment why it is different? -Mehmet PS: tc -s class show dev eth0 shows that I got the following [root@nat...

what is the script for deleting filter that already exist??? the htb script is: tc qdisc add dev eth0 root handle 1:0 htb default 4 tc class add dev eth0 parent 1:0 classid 1:1 htb rate 500kbps ceil 500kbps tc class add dev eth0 parent 1:1 classid 1:2 htb rate 300kbps ceil 300kbps tc qdisc add dev eth0 parent 1:2 handle 12:0 pfifo tc class add dev eth0 parent 1:1 classid 1:3 htb rate 150kbps ceil 150kbps tc qdisc add dev eth0 parent 1:3 handle 13:0 pfifo tc class add dev eth0 parent 1:...

hey guys i am regulating the traffic to & fro by my network through a linux gateway , its behaving strange. i regulated Downlink to 2Mbps & UPlLINK to 500Kbps. both perform well when those are done independent i.e. one at a time but when i do both from a client system ..the downlink however continues at 2mbps but the uplink falls down to 100kbps? is something wrong with my script or is there some other reason to explain this ????? downlink regulated o...

...39;'m implementing AF and EF with a root rate of 500 kbps (kilo bits per second). I am using DSMARK to classify packets. I''m implementing this on two different hardware sets PPC and x86 with the same kernel options configured. Problem: My root rate is going about 75 kbps over its 500kbps limit (ceil 500). I believe this is because of burst and cburst settings. I am using default calculations now, on all classes. Is there a formula to use in tweaking these values? I would like my rates to follow the assigned rate more closely. I am generating traffic with a hardware traffic ge...

Hi, I am running rsync version 2.5.7 (stock distro on redhat linux, ES and 9) to rsync a directory with ~300k files in it from a machine on a 10Mbit internet tap to a machine with a 100Mbit internet tap. The problem is that I am only getting about 500Kbps during the transfer. I have tested link speed by scping a file between the two systems, performance was approximately 7.5Mbit/sec. Ping time between the two locations is about 2.5 ms (only 20 miles apart) This is obviously a problem. I have also tried rsyncing just a few files (say 400) to rule o...

...39;m confused on if this is possible or not for it seems that once you filtered a IP address for instance, then it''s gone and cannot be filtered through another qdisc. Doing the math, if I had 125 users divided up into a 3mbit connection, I would have to have a rate of 24 kbps and ceil of 500kbps per class. But if I did rate limit each user, now how do I rate limit all the ports flowing as a whole like I was originally doing? Thanks for the help. -Dave _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc H...

I'm struggling to get my VOIP installation to be acceptable. I'm looking for advice on what else I can look for. My system: o Teliax VOIP service, voip-ny1 proxy o RCN Cable Internet Service (3Mbps download, 500kbps upload, 6ms average jitter) o 3.2 GHZ P4 Server (runs asterisk, firewall, other stuff) o server lightly loaded o Linux kernel 2.6.19.2 o Shorewall Firewall software with QOS configured for VOIP P1 o Asterisk 1.4.0 o Sipura SPA-2000 o Grandstream GXP-2000 o IAX connection to teliax Outbound voice...

the Vorbis FAQ says: "mid to high quality (8kHz-48.0kHz, 16+ bit, polyphonic) audio and music at fixed and variable bitrates from 16 to 128 kbps/channel." What is the difference between Hz and bitrate? Doesn't MP3 support higher bitrates? Pointers for more reading are welcome.

...es advanced audio and video functions. He also unveiled new Windows Media 8 audio and video codecs with significant quality improvements. Near CD-quality audio is now available at 48Kbps, beating Microsoft’s previous 64Kbps rate. For video, “near VHS” is available at 250Kbps, while “near DVD” is at 500Kbps. The quest for higher quality audio and video is growing rapidly. In May, RealNetworks announced RealVideo 8, which it claims can show VHS quality video at about 300Kbps. More recently, it announced RealAudio 8, which provides CD quality audio at 64Kbps – half the size of MP3. However, Microsoft...

Guys Considering the festive season is upon us, thanks to everyone contributing to the list and helping all the readers with your great input! I don''t want to mention names, I''ll most certainly leave someone out. With this mail I''d like to test some theory on bandwidth management, with my own successes and failures during the past year. Sharing a link between 200

Hi Geoff, > some questions: > > 1. What is the bitrate of your stream? > 128kbps > > 2. How much bandwidth do you have between your source and your streaming > server? > Fast connection, ~500kbps achievable upload. > > 3. How many listeners do you have? > < 10. The glitching occurs even with only 1 listener. It seems to repair itself for a while if the listener reloads the stream. > > 4. How much bandwidth does your streaming server have to service > listeners? &...

Hey all We are seeing intrusion attempts coming from address 201.47.236.122 today They were hitting our switches trying to get in. So we blocked them at our firewall. Just wanted to put the word out so you all can protect your self. Bryant -------------- next part -------------- An HTML attachment was scrubbed... URL:

..., line=242): entered rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at rsync.c(242) [send er=2.6.8] _exit_cleanup(code=20, file=rsync.c, line=242): about to call exit(20) This happens every time i run rsync on content larger than 1 GB, it doesnt matter if I change the transfer speed to 500kbps or what options I use in the command line, it always hangs. rsync -avz -vvvv --bwlimit=500 -e "ssh.exe -i C:\cms\PageGenerator\dev_rsa" //server/share/folder/ user at 10.95.101.34:/cygdrive/g/EWCMS_SYNC/folder -- View this message in context: http://www.nabble.com/Rsync-hangs-at-%22cal...

Hi all I have following script in my server. Now I want to restrict ip 192.168.3.2 to 128kbps (downlink). But in this case client can download upto 500kbps and upload cannot exceed more than 20kbps. Now what should I do to restrict client 192.168.3.2 within 128kbps downlink and 64kbps uplink. tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1:0 htb tc class add dev eth0 parent 1:0 classid 1:1 htb rate 300kbit tc class add dev eth0...

...39;'m implementing AF and EF with a root rate of 500 kbps (kilo bits per second). I am using DSMARK to classify packets. I''m implementing this on two different hardware sets PPC and x86 with the same kernel options configured. Problem: My root rate is going about 75 kbps over its 500kbps limit (ceil 500). I believe this is because of burst and cburst settings. I am using default calculations now. Is there a formula to use in tweaking these values? I would like my rates to follow the assigned rate more closely. I am generating traffic with a hardware traffic generator. Starti...

...ne WAN port and a LAN port(4 port switch). The WAN will be connected to an ADSL modem(so we don`t know the bandwidth in advance for the WAN and depends on the ADSL connection taken). We need to give highest priority to the Voice and control the WAN bandwidth to 2Mbps. I tried with the TBF by giving 500kbps for voice and 1.5Mbps for other traffic(I`m assuming that a user takes atmost 2Mbps line). But the maximum throughput i`m getting for the data is 1.15 only. Even if create only one TBF class with full 2 Mbps rate). I need to simulate different WAN bandwidth speeds like 64kbps, 128kbps, 256kbps..et...