search for: 36g

...We can not let it die and I volunteer to keep the Sparc alive! > > My SPARCstation pizzaboxes can be ready for action in a day or two. there are three sparc buildbots which are hooked up to lab.llvm.org. They are currently idle because no builders have been scheduled to use them: # gcc54 36G 0.5 GHz TI UltraSparc IIe (Hummingbird) / 1.5 GB RAM / Sun Netra T1 200 / Debian sparc # gcc62 9202 36G 6x0.4 GHz TI UltraSparc II (BlackBird) / 5 GB RAM / Sun Enterprise 4500 / Debian sparc # gcc63 9203 72G 8x4x1 GHz Sun UltraSparc T1 (Niagara) / 8 GB RAM / Sun Fire T1000 / De...

Chris, > FYI, I completely agree that we shouldn't remove the sparc target. However, it is currently unmaintained, and has some pretty glaring bugs. Is anyone interested in stepping up to maintain the target? > > -Chris We can not let it die and I volunteer to keep the Sparc alive! My SPARCstation pizzaboxes can be ready for action in a day or two. Pawel Wodnicki > On Oct

Hello, I did df -h on my CentOS 6.4 machine. $ df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_ysg-lv_root 47G 8.8G 36G 20% / tmpfs 948M 372K 947M 1% /dev/shm /dev/sda1 485M 62M 398M 14% /boot /dev/mapper/vg_ysg-lv_home 4.6G 2.7G 1.7G 63% /home What I don't understand is why is /home so tiny and how can I re-partition this without having to nuke and...

Can anyone comment or share experences with using Dell 2850's with Asterisk. Proposed config is 2850, 2 x 3.6g procs, 2 g's of ram, 4 x 36g 15k rpm drives raid 10, Digium TE411P ( the echo cancelling cards ). Expected load is 1 or 2 pri's (most likely 1 ) 100 Polycom phones on the local network, 15 phone on a remote T1. 6 phone remote via the internet using IAX, Voicemail for 125 users. As little transcoding as possible. G...

...e one of the existing partitions (/scratch) untouched during the installation. Here is my current layout (LogVol00 is swap so not shown in the df output below): # df -hl Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol01 36G 11G 24G 30% / /dev/sda1 99M 17M 78M 18% /boot /dev/mapper/VolGroup00-LogVol02 36G 9.7G 24G 29% /scratch # vgscan Reading all physical volumes. This may take a while... Found volume group "VolGroup00" using metadata t...

I have two asterisk servers connected using IAX. Server A has a TE410P running on a Xeon 2.4Ghz with 2GB RAM and 36G IDE HD on Debian 2.6.11-1-686 and Asterisk CVS-Nv1-0-7-06/01/05-01:27:25. Server B does not have any Digium board, but has ztdummy and zaptel loaded. It's runnin on a P4 1.6Ghz with 1GB RAM and 36G SCSI RAID 10 on Gentoo 2.6.11-gentoo-r9 and Asterisk 1.0.7. The relevant section of iax.c...

...> Subject: [Xen-users] Speed of domainU drives > > Now, I don''t know how domainU drive speed works or any of it really. > > But here''s what I''m doing: > > Have a server : intel 875 chipset intel board, intel > p3.06mhz, 1 g ram, twin WD Raptor 36G drives. > > Now, I''ve put the domain0 in a little space as possible > spreading usr and var to /dev/sdb and / and swap to /dev/sda. > > My first domain will be a basic partition on the /dev/sda > second domain is a mirror using raid1 via /dev/sda8 and > /dev/sdb8....

...ossible, do I only show a user's quota limits when he logs into SSH? For example, I set a soft limit of 10GB on this user, but when he logs in he can see all the limits: -sh-3.2$ df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/fluid01-root 38G 36G 530M 99% / /dev/mapper/fluid01-home 48G 15G 30G 34% /home /dev/md0 190M 33M 148M 19% /boot tmpfs 881M 0 881M 0% /dev/shm /dev/mapper/fluid01-cpbackup 203G 184G 9.4G 96% /cpbackup -sh-3.2$ Is it possibl...

Hey all, Roughly, how much disk space would I need on my server to mirror the entire ISO collection and the repository files. Also, how would I tell my server to only mirror CentOS 5 and 6? -- If you have any questions, please do not hesitate to contact me on +61 478 241 896. Regards, Christopher Hawker

I have Samba 3.0.4 joined to a Windows 2000 Active Directory domain with about 16,000 users and 1,000 groups. I run FreeBSD 5.2.1 on a Dell PowerEdge 1750, dual proc P4 Xeon with HTT and 1 gig of RAM. Storage is RAID-5, three drives, 36G each. I use winbind to auth users when accessing shares on the server. This is going to be our new fileserver. Check this: # time ps auxwww | grep http root 7904 0.0 0.3 4484 3212 ?? Ss 2:58PM 0:00.01 /usr/local/sbin/httpd -k start root 7905 0.0 0.3 4884 3380 ?? S...

I have a test bed server that's pretty old- PIII Dual 550. I've done yum update kernel-smp and when I run cat/proc/cpuinfo it lists both processors- is there anything I need to to to confirm that it's fully utilizing both processors? I ask this because under the old OS (Fedora Core 2) I always saw an error message at boot that said something about operating in single-processor mode

...; unused devices: <none> > > $ df -h > Filesystem Size Used Avail Use% Mounted on > /dev/md1 236M 38M 186M 17% / > tmpfs 249M 0 249M 0% /dev/shm > /dev/md3 1.9G 1.2G 643M 65% /usr > /dev/md5 36G 29G 5.3G 85% /var > /dev/md6 37G 30G 4.7G 87% /archive > > $ cat /proc/swaps > Filename Type Size Used > Priority > /dev/md2 partition 995896 326712 -1 > > It has 2 x 80...

"Richard W.M. Jones" <rjones@redhat.com> writes: > On Wed, Nov 16, 2016 at 09:06:29AM +0200, Michal Skrivanek wrote: >> >> > On 7 Nov 2016, at 22:16, Derek Atkins <derek@ihtfp.com> wrote: >> > >> > Hi, >> > >> > My last VM imported in 2 minutes. This one has been sitting for three >> > hours. I think this is

I am trying to install CentOS 4.6 to a pair of 750GB hard drives. I can successfully install to either of the drives as a single drive, but when I try to use both drives and mirror the partitions, I start having problems. Anaconda crashes as it is trying to format the drives. This is what I'm trying to create: /dev/md0: 200MB, /boot /dev/md1: 2GB, swap /dev/md2: rest of the

...>> vmware-toolbox-cmd disk shrink / > > I'm not familiar with this command. In general terms, conversions > take a time proportional to the amount of disk space in use by the > guest. This command is a disk defragment + shrink inside VMware. Basically, the .vmdk was about 36G even though the system was only using about 3G. Running this command released all that free space and then reduced the VMDK file. I figured the time should be proportional to disk usage, which is why I was so surprised that it took orders of magnitude longer than other systems with similar disk u...

This is possibly the dumbest question I have asked ever, but how do you set ACLs on files within a ZFS filesystem? Trying to use setfacl(1) diverts me to the acl(5) manpage; well, I know that I need to use NFSv4 style ACLs, but where is the utility to do so? This is on Solaris 10 Update 2. Thanks, Ceri -- That must be wonderful! I don''t understand it at all.

Dear All, I would like to get community's feedback with regard to RAID1 ( Software or Hardware) implementations with asterisk. This is my setup Motherboard with SATA RAID1 support CENT OS 4.4 Asterisk 1.2.19 Libpri/zaptel latest release 2.8 Ghz Intel processor 2 80 GB SATA Hard disks 256 MB RAM digium PRI/E1 card Following are the concerns I am having I'm planing to put this asterisk

Found an error or two from my logwatch report from yesterday, thought I would share this in hopes this is just first time run of the problem I noticed in the Kernel report section... Also not sure why there's an issue with automount either.... but I guess I could ask on that issue as well. I am not worried about the NAMED error, this is something that happens due to one of the services that

As mentioned last night, we''ve been reviewing a proposal for hot spare support in ZFS. Below you can find a current draft of the proposed interfaces. This has not yet been submitted for ARC review, but comments are welcome. Note that this does not include any enhanced FMA diagnosis to determine when a device is "faulted". This will come in a follow-on project, of which some

...n341F xen-3.4.1]# df -h Filesystem            Size  Used Avail Use% Mounted on /dev/mapper/vg_serverxen341f-LogVol00                               29G   23G  4.5G  84% / /dev/sdb8             194M   55M  130M  30% /boot tmpfs                 3.9G  528K  3.9G   1% /dev/shm /dev/sda14             36G   15G   20G  43% /mnt It is for Intel ICHR9R (AHCI) South Bridge with SATA drive attached. In you case i would suspect SAS Controller setup in BIOS as "SCSI". You mean it prevents F11 from default /boot+LVM setup ? Boris. --- On Wed, 8/19/09, Fasiha Ashraf <feehapk@yahoo.co.in> w...