Gerry Boudreaux
2003-Sep-26 12:55 UTC
[Asterisk-Users] Cisco 2600 and ASTERISK and calling out
You have no dial-peer telling the router what to do with the outbound call. http://www.tape.net/~gerry/asterisk/cisco26x0.html At 12:50 PM 9/26/2003, you wrote:>Like Gerry wrote for callerid you need VIC-2FXO-M1 card. > >Right now I am stuck on making outgoing call. > >Could soembody help me with the configuration. > >On cisco I have soemthing like that: > >dial-peer voice 400 pots >destination-pattern 9T >voice-port 1/1/0 > >In extensions.conf > >exten=>9.,1,Dial(H323/${EXTEN:1}@blah) >exten=>9.,2,Congestion > >In h323.conf > >[blah] >type=friend >host=xxx.xxx.xxx.xxx >contex=>default >exten=>9999,1,Goto(s,1) >incominglimit=4 > >When dialing >99xxxxxx > >I am getting 503 Service Unavailable >And there is nothing on debug on Router. Looks like call get stuck somewhere >in asterisk >And Asterisk says this: > -- Called 08500569@blah > == No one is available to answer at this time > -- Executing Congestion("SIP/1008-1dc7", "") in new stack > == Spawn extension (default, 9908500569, 2) exited non-zero on >'SIP/1008-1dc7' > > >What could be the problem ??? > >----- Original Message ----- >From: "Gerry Boudreaux" <gerry@intersurf.com> >To: <asterisk-users@lists.digium.com> >Sent: Friday, September 26, 2003 2:26 PM >Subject: Re: [Asterisk-Users] Cisco 2600 and ASTERISK > > > > To get callerid you apparently need the VIC-2FXO-M1 card from Cisco. > > > > Gerry > > > > At 12:07 PM 9/26/2003, Michael Gschwandtner wrote: > > >On Fri, 26 Sep 2003 12:51:16 -0300, Bartosz Jozwiak wrote > > > > I made it work! > > > > My miste was: > > > > > > > > session target ipv4:66.178.36.220:1720 > > > > when I change it to session target ipv4:66.178.36.220 > > > > everything works just fine. > > > > > >Do you get the called number? So you can decide what to do woth the > > >call. I'm really > > >interestet in this because i'm stuck at this point. I'll get the calls >but > > >i don't get the called > > >number. > > > > > > > > > > Right now I have to make outgoing call. > > > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > Asterisk-Users@lists.digium.com > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > >_______________________________________________ >Asterisk-Users mailing list >Asterisk-Users@lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users
Bartosz Jozwiak
2003-Sep-26 18:11 UTC
[Asterisk-Users] Cisco 2600 and ASTERISK and calling out
This is my dial peer for outband calls: dial-peer voice 400 pots destination-pattern 9T voice-port 1/1/0 When I dialing directly to the router it works. But when I am using Asterisk dialing out it does not want to work. Just look down for my configuration and debug i get. -- Bart -------------------- You have no dial-peer telling the router what to do with the outbound call. http://www.tape.net/~gerry/asterisk/cisco26x0.html At 12:50 PM 9/26/2003, you wrote:>Like Gerry wrote for callerid you need VIC-2FXO-M1 card. > >Right now I am stuck on making outgoing call. > >Could soembody help me with the configuration. > >On cisco I have soemthing like that: > >dial-peer voice 400 pots >destination-pattern 9T >voice-port 1/1/0 > >In extensions.conf > >exten=>9.,1,Dial(H323/${EXTEN:1}@blah) >exten=>9.,2,Congestion > >In h323.conf > >[blah] >type=friend >host=xxx.xxx.xxx.xxx >contex=>default >exten=>9999,1,Goto(s,1) >incominglimit=4 > >When dialing >99xxxxxx > >I am getting 503 Service Unavailable >And there is nothing on debug on Router. Looks like call get stuck somewhere >in asterisk >And Asterisk says this: > -- Called 08500569@blah > == No one is available to answer at this time > -- Executing Congestion("SIP/1008-1dc7", "") in new stack > == Spawn extension (default, 9908500569, 2) exited non-zero on >'SIP/1008-1dc7' > > >What could be the problem ??? > >----- Original Message ----- >From: "Gerry Boudreaux" <gerry@intersurf.com> >To: <asterisk-users@lists.digium.com> >Sent: Friday, September 26, 2003 2:26 PM >Subject: Re: [Asterisk-Users] Cisco 2600 and ASTERISK > > > > To get callerid you apparently need the VIC-2FXO-M1 card from Cisco. > > > > Gerry > > > > At 12:07 PM 9/26/2003, Michael Gschwandtner wrote: > > >On Fri, 26 Sep 2003 12:51:16 -0300, Bartosz Jozwiak wrote > > > > I made it work! > > > > My miste was: > > > > > > > > session target ipv4:66.178.36.220:1720 > > > > when I change it to session target ipv4:66.178.36.220 > > > > everything works just fine. > > > > > >Do you get the called number? So you can decide what to do woth the > > >call. I'm really > > >interestet in this because i'm stuck at this point. I'll get the calls >but > > >i don't get the called > > >number. > > > > > > > > > > Right now I have to make outgoing call. > > > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > Asterisk-Users@lists.digium.com > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > >_______________________________________________ >Asterisk-Users mailing list >Asterisk-Users@lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users ------------------------------------------------- This mail sent through IMP: http://horde.org/imp/