search for: 2bd0

...-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 1 I think i need the zaphfc module to make it work, but it is not included into the dahdi package, and i cant find it. The command dahdi_hardware says this: dahdi_hardware pci:0000:01:09.0 zaphfc- 1397:2bd0 HFC-S ISDN BRI card But, how i can install the zaphfc module? Thanks in advance to all. Claudio.

...". The driver installs correctly, finds the cards, but when I issue the ztcfg command, the domain crashes immidiatly: Zapata Telephony Interface Registered on major 196 PCI: Enabling device 0000:00:0d.0 (0006 -> 0007) PCI: Obtained IRQ 11 for device 0000:00:0d.0 zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xd08b2000 fifo 0xcf048000(0x3b292000) IRQ 11 HZ 100 zaphfc: Card 0 configured for TE mode PCI: Enabling device 0000:00:0e.0 (0006 -> 0007) PCI: Obtained IRQ 3 for device 0000:00:0e.0 zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xd08be000 fifo 0xcf068000(0x3b272000) IRQ...

...Registered on major 196 Dec 18 07:27:17 intechdial kernel: zaphfc: no version for "zt_receive" found: kernel tainted. Dec 18 07:27:17 intechdial kernel: ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 5 (level, low) -> IRQ 5 Dec 18 07:27:17 intechdial kernel: zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xa168400 fifo 0x4fe8000(0x2fe8000) IRQ 5 HZ 1000 Dec 18 07:27:17 intechdial kernel: zaphfc: Card 0 configured for TE mode Dec 18 07:27:17 intechdial kernel: ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 10 (level, low) -> IRQ 10 Dec 18 07:27:17 intechdial kernel: zaphfc: CCD/B...

...me the following: Zapata Telephony Interface Registered on major 196 zaphfc: no version for "zt_receive" found: kernel tainted. PCI: Enabling device 0000:00:0e.0 (0004 -> 0007) ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 11 (level, low) -> IRQ 11 zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xe08c4000 fifo 0xd1da8000(0x11da8000) IRQ 11 HZ 1000 zaphfc: Card 0 configured for NT mode zaphfc: 1 hfc-pci card(s) in this box. Registered tone zone 3 (Netherlands) stoibi*CLI> zap show channels Chan Extension Context Language MusicOnHold pseud...

Hello, The harddisk of my etch/bristuffed asterisk1.2 box finally died. I moved the cheap (1397:2bd0) HFC-S card to a squeeze host (i686) and built dahdi modules 2.3.0.1 using m-a. After zaptel->dahdi and asterisk 1.2->1.6 config adaptations, everything seems ok, except for the BRI side, unable to bring layers 1/2 up. Asterisk reports: chan_dahdi.c:12393 dahdi_pri_error: 1 Unable to receive...

...i'm running: kernel-2.4.27 Asterisk 1.0.7-BRIstuffed-0.2.0-RC8e zaptel modules 1.0.7 zaphfc is from bristuff-0.2.0-RC8e When I'm doing the insmod on zaptel, zaphfc, zaprtc: Zapata Telephony Interface Registered on major 196 PCI: Found IRQ 12 for device 00:12.0 zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xc3840000 fifo 0xc2d58000(0x2d58000) IRQ 12 HZ 100 zaphfc: Card 0 configured for TE mode Registered Span 1 ('ZTHFC1') with 3 channels Span ('ZTHFC1') is new master zaphfc: 1 hfc-pci card(s) in this box. Registered Span 2 ('ZTRTC/1') with 0 channels Real Ti...

...rnel: Zapata Telephony Interface Registered on major 196 Mar 8 17:56:06 ciop kernel: PCI: Enabling device 0000:00:06.0 (0000 -> 0003) Mar 8 17:56:06 ciop kernel: ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 169 Mar 8 17:56:06 ciop kernel: zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xd081ff00 fifo 0xc6628000(0x6628000) IRQ 169 HZ 1000 Mar 8 17:56:06 ciop kernel: zaphfc: Card 0 configured for TE mode Mar 8 17:56:06 ciop kernel: zaphfc: 1 hfc-pci card(s) in this box. Mar 8 17:56:27 ciop kernel: zaphfc: stop Mar 8 17:56:27 ciop kernel: zaphfc: shutting down...

...ernel: zaphfc: freed one card. Aug 17 02:33:27 server kernel: PCI: Enabling device 00:12.0 (0000 -> 0003) Aug 17 02:33:27 server kernel: PCI: Found IRQ 10 for device 00:12.0 Aug 17 02:33:27 server kernel: PCI: Sharing IRQ 10 with 00:0e.0 Aug 17 02:33:27 server kernel: zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xd898ff00 fifo 0xcd088000(0xd088000) IRQ 10 HZ 100 Aug 17 02:33:27 server kernel: zaphfc: Card 0 configured for NT mode Aug 17 02:33:27 server kernel: zaphfc: 1 hfc-pci card(s) in this box. Aug 17 02:33:27 server kernel: Registered tone zone 3 (Netherlands) Aug 17 02:33:27 serve...

...ten => 6,1,Dial(Zap/g1/4758645,60,r) >>--------- >> >> >>----- >>load modules >>----- >>zaptel: no version for "struct_module" found: kernel tainted. >>Zapata Telephony Interface Registered on major 196 >>zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xc49b9e00 fifo >>0xc2678000(0x2678000) IRQ 9 HZ 1000 >>zaphfc: Card 0 configured for NT mode >>zaphfc: 1 hfc-pci card(s) in this box. >>Registered tone zone 3 (Netherlands) >>zaphfc: card 0 layer 1 state = G2 >>zaphfc: card 0 layer 1 state = G...

...0 [TE] name=ZTHFC1 manufacturer=Cologne Chips devicetype=HFC-S PCI-A ISDN location=PCI Bus 01 Slot 10 basechan=1 totchans=3 irq=18 type=digital-TE syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=AMI framing_opts=CCS coding= framing=CAS dahdi_hardware pci:0000:01:09.0 zaphfc+ 1397:2bd0 HFC-S ISDN BRI card lsmod zaphfc 22268 0 dahdi 204045 1 zaphfc .... DAHDI Version: 2.5.0.1 Echo Canceller: HWEC Obviously in asterisk, there is no channel configured: *CLI> dahdi show channels Chan Extension Context Language MOH Interpret...

...o seriosly, it's just a test config with no actual usage. BIG TNX in advance for at least some help: zaptel.conf ----------- defaultzone=nl loadzone=nl span=1,1,3,ccs,ami bchan=1,2 dchan=3 syslog ------ PCI: Enabling device 00:0f.0 (0000 -> 0003) zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xca8fd000 fifo 0xc6348000(0x6348000) IRQ 11 HZ 100 zaphfc: Card 0 configured for NT mode Registered Span 1 ('ZTHFC1') with 3 channels Span ('ZTHFC1') is new master zaphfc: 1 hfc-pci card(s) in this box. ztcfg -vv --------- SPAN 1: CCS/ AMI Build-out: 399-533 feet...

...------------------------- /sbin/modprobe --ignore-install hfcpci protocol=0x2 layermask=0xf HFC card c0abe800 dch c0abe87c bch1 c0abea18 bch2 c0abebb4 mISDN: HFC-PCI driver Rev. 1.49 PCI: Enabling device 0000:00:01.0 (0000 -> 0003) mISDN: HFC-PCI card manufacturer: CCD/Billion/Asuscom card name: 2BD0 HFC-PCI: defined at mem 0xcd324000 fifo 0xc0650000(0x1a650000) IRQ 18 HZ 250 reset_hfcpci: entered HFC_PCI: resetting HFC ChipId(30) HFC-PCI status(2) before reset HFC-PCI status(2) after reset HFC-PCI status(2) after 50000us init_card: entered inithfcpci: entered HFC PCI: IRQ 18 count 19 HFC card...

...syslog says:<br> <br> <b>Dec&nbsp; 3 20:26:12 asterisk kernel: PCI: Enabling device 00:0a.0 (0000 -> 0003)<br> Dec&nbsp; 3 20:26:12 asterisk kernel: PCI: Found IRQ 9 for device 00:0a.0<br> Dec&nbsp; 3 20:26:12 asterisk kernel: zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xc48dc000 fifo 0xc1aa8000(0x1aa8000) IRQ 9 HZ 100<br> Dec&nbsp; 3 20:26:12 asterisk kernel: zaphfc: Card 0 configured for NT mode<br> Dec&nbsp; 3 20:26:12 asterisk kernel: zaphfc: 1 hfc-pci card(s) in this box.<br> </b><br> looks good I think...

...nf http://marcopar.altervista.org/zaptel.conf in the system messages i'm getting this: Zapata Telephony Interface Registered on major 196 PCI: Enabling device 0000:00:06.0 (0000 -> 0003) ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 185 zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xd08eaf00 fifo 0xcf338000(0xf338000) IRQ 185 HZ 1000 zaphfc: Card 0 configured for TE mode zaphfc: 1 hfc-pci card(s) in this box. Zaptel Configuration ====================== SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (D...

...ne=nl defaultzone=nl span=1,1,3,ccs,ami bchan=1-2 dchan=3 dmesg snippet: Zapata Telephony Interface Registered on major 196 PCI: Enabling device 0000:00:0d.0 (0000 -> 0003) ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xd0864f00 fifo 0xca778000(0xa778000) IRQ 10 HZ 1000 zaphfc: Card 0 configured for NT mode zaphfc: 1 hfc-pci card(s) in this box. Registered tone zone 3 (Netherlands) Any Ideas? TIA /ralph

Hello, I am trying to use a HFC-PCI (CCD/Billion/Asuscom 2BD0) card in TE mode to dial-in and out with ISDN. The problem is I can not get the card to dial out with a Zap channel. Dial-in is working. I am using bri-stuff 0.1.0-RC4 (but tried also RC3 and RC2k). I tried all combination of "immediate", "overlapdial", "pridialplan&quo...

I have a North American BRI configured as National ISDN (NI-1) on an SBC (Nortel?) switch. SBC calls this "FastTrak ISDN", and it's surprisingly inexpensive -- less than two POTS lines. I've been trying to find an inexpensive PCI interface solution to connect this to Asterisk as voice lines. I prefer ISDN BRI over POTS lines because of the improved signalling, fast dialing,

...bug=1 and I have the following output in the logs: ----------------begin------------------------------ Mar 19 00:18:49 asterias kernel: PCI: Found IRQ 11 for device 00:09.0 Mar 19 00:18:49 asterias kernel: PCI: Sharing IRQ 11 with 00:10.1 Mar 19 00:18:49 asterias kernel: zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xe0bbc000 fifo 0xd80d8000(0x180d8000) IRQ 11 HZ 100 Mar 19 00:18:49 asterias kernel: zaphfc: Card 0 configured for NT mode Mar 19 00:18:49 asterias kernel: zaphfc: Card 0 configured for master mode Mar 19 00:18:49 asterias kernel: zaphfc: 1 hfc-pci card(s) in this box. ---------...

...bH ISDN network controller [HFC-PCI] (rev 02) When loading zaptel drivers: Mar 6 21:29:13 linux-1 kernel: Zapata Telephony Interface Registered on major 196 Mar 6 21:29:13 linux-1 kernel: PCI: Enabling device 01:02.0 (0000 -> 0003) Mar 6 21:29:13 linux-1 kernel: zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xf91c5e00 fifo 0xf7598000(0x37598000) IRQ 5 HZ 100 Mar 6 21:29:13 linux-1 kernel: zaphfc: Card 0 configured for NT mode Mar 6 21:29:13 linux-1 kernel: zaphfc: 1 hfc-pci card(s) in this box. Mar 6 21:29:13 linux-1 kernel: Registered tone zone 3 (Netherlands) mar 6 21:29:13 li...

...so [global] chan_modem.so=yes chan_zap.so=yes this is the output from the module insertion: Zapata Telephony Interface Registered on major 196 PCI: Enabling device 0000:00:06.0 (0000 -> 0003) ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 185 zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xd08eaf00 fifo 0xcd248000(0xd248000) IRQ 185 HZ 1000 zaphfc: Card 0 configured for TE mode zaphfc: 1 hfc-pci card(s) in this box. this is the ztcfg -vvv: Zaptel Configuration ====================== SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) Channel map: Channel 01: Indi...