Hello everybody, I'm having little trouble (well, pretty big trouble) with HFC-S card and Asterisk. My idea is to do VoIP/IAX link between two HW PBXen using two Asterisk PC boxen with ISDN cards in them. AFAIK HFC-S cards must be in NT mode for this installation, they must behave like state line for those HW PBXen. (if wrong, please correct me). Diagram follows: Internet Phone1-PBX1-<ISDN>[NT]-ASTERISK1--<IAX>--ASTERISK2-[NT]<ISDN>-PBX2-Phone2 The problem is: I don't even know if HFC-S cards are working. Module is loaded fine, everything seems OK but when I try to dial somewhere using Asterisk CLI nothing happens. (well it says no answer, but HW PBX doesn't even know that somebody is trying to dial - I've got sysphone with those nice LEDs and none of them is emiting light :) CLI> dial 220 -- Executing Dial("OSS/dsp", "Zap/1/36|10") in new stack -- Called 1/36 -- Channel 0/1, span 1 got hangup -- Hungup 'Zap/1-1' == No one is available to answer at this time When I do fast > show channels, this is the result: CLI> show channels Channel (Context Extension Pri ) State Appl. Data Zap/1-1 (test s 1 ) Dialing AppDial (Outgoing Line) OSS/dsp (test 220 1 ) Ringing Dial Zap/1/36|10 My Questions: Is there any application which can just dial somewhere or at least run some data through line? I just need to test that there's dataflow between HFC-S and PBX. I need something without hard setup, just simple test tool. Is there anybody who would be so kind to send me his/hers Asterisk/Zapata/Zaptel config files so I can check them with mine? I know, configs are somewhat personal stuff, but it will _very_ appreciated :) Here come all necessary information from my config files. Don't take them too seriosly, it's just a test config with no actual usage. BIG TNX in advance for at least some help: zaptel.conf ----------- defaultzone=nl loadzone=nl span=1,1,3,ccs,ami bchan=1,2 dchan=3 syslog ------ PCI: Enabling device 00:0f.0 (0000 -> 0003) zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xca8fd000 fifo 0xc6348000(0x6348000) IRQ 11 HZ 100 zaphfc: Card 0 configured for NT mode Registered Span 1 ('ZTHFC1') with 3 channels Span ('ZTHFC1') is new master zaphfc: 1 hfc-pci card(s) in this box. ztcfg -vv --------- SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: D-channel (Default) (Slaves: 03) 3 channels configured. zapata.conf ----------- [channels] language=en switchtype = euroisdn pridialplan=unknown prilocaldialplan=unknown signalling = bri_net_ptmp echocancel=yes immediate=no group = 1 context = test channel => 1 channel => 2 extensions.conf --------------- [test] exten => 210,1,Wait(1) exten => 210,2,Answer exten => 210,3,Playback(demo-congrats) exten => 210,4,Hangup exten => 220,1,Dial(Zap/1/36,10) Ufff. Hope that's it... Big thanx once more... --ZK - - -----------------------[ CESKE TELEKOMUNIKACE ]------ - - Zdik Kudrle GSM: +420 604 781 414 HTTP: www.cesketelekomunikace.cz SMTP: zdik.kudrle@cesketelekomunikace.cz