search for: 231.0

Hello, I'm trying to get an energenie EG-UPS-033 (http://energenie.com/item.aspx?id=8087) to work with nut. It standard comes with linux software (UPSmart), which shows the input/output voltage, load level, input frequency. and battery and case temperature. The values change about every second. The selected monitor mode in this tool is Mega(USB). The bad thing of this tool that it

Hi, Just purchashed this UPS. The megatec_usb driver appears to be communicating with the UPS - however, the ups.status field always states "off" /usr/local/ups/bin/megatec_usb -a plexus -DD Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb] Carlos Rodrigues (c) 2003-2007 Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] Andrey Lelikov (c)

Hi, Just purchashed this UPS. The megatec_usb driver appears to be communicating with the UPS - however, the ups.status field always states "off" /usr/local/ups/bin/megatec_usb -a plexus -DD Network UPS Tools 2.2.1 - Megatec protocol driver 1.5.9 [megatec_usb] Carlos Rodrigues (c) 2003-2007 Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] Andrey Lelikov (c)

Hi Arnaud and NUT team You may recall some time ago, I and a few others posted questions about the above referenced (cheap and cheerful) USB-based UPS - specifically regarding FreeBSD USB support in NUT. The original posting was entitled "Zigor Ebro 650 compatibility". I've since tried the latest Windows port of NUT with my WinXP laptop connected to the Zigor Ebro and finally

Hi, everyone, I've recently bought a UPS from Mecer. This is a South African brand that basically resells Mustek hardware, and this UPS is no exception; it's a Mustek product. It does come with software for Linux, but that is terrible (the background process that monitors the UPS is written in Java and needs a terminal to start properly, so you can't run it from a startup script...

Hi, everyone, I've recently bought a UPS from Mecer. This is a South African brand that basically resells Mustek hardware, and this UPS is no exception; it's a Mustek product. It does come with software for Linux, but that is terrible (the background process that monitors the UPS is written in Java and needs a terminal to start properly, so you can't run it from a startup script...

Hi, i just got a Phoenix Technologies PH1200UPSB 1200va serial-port ups and it is only partially supported by bestups driver (needs manual ID or driver rewriting). It comes with a tool called UPSilon 2.1 on a CD (which worked better with TERM=linux). After [sl]tracing it i came to these results: COMMANDS : - Command: I Response: "#XPHOENIX TECH PH1200UPS VER2.00C " - Command: F

Hi All! I have a traoble whith my ups, - megatec driver can not calculating % of charging and voltage on battery: # uname -a FreeBSD backup.*.*.* 8.1-RELEASE FreeBSD 8.1-RELEASE #0: Wed Sep 22 12:25:01 EEST 2010 ups.conf [Powercom] driver = megatec port = /dev/cuau0 #battvolts=12:24 desc = "powercom sxl-1000A" # ./nut start Network UPS Tools - UPS driver controller 2.4.1

hi @ all, i just wonder, if it is posible to read the values for all the three phases of a mge galaxy 6000 ups? we have unfortunately one mge comet ups (one phase) to play at work, but it is important to know, how many information upsc can deliver from a galaxy. we plane to use web / snmp interface. can someone post the upsc from such ups? thanks in advance, miroslav -- SHALTEV.ORG

Not of a big help here, but I think it's a voltronic power vesta 650: http://www.voltronicpower.com/oCart2/index.php?route=product/product&path=37&product_id=52 If that is the case, it should work both with the blazer drivers (i.e. all but the shutdown sequence) and with the now defunct voltronic ones. With arno's words: "We are currently merging a new driver to replace

Hi there, my HP R1500 G3 UPS doesn't apply my battery.charge.low value i set via upsrw. Is this a common problem with this model in nut 2.6.4? Any ideas how to force the UPS to accept this value? Regards Jan % upsc hp1500 battery.charge: 100 battery.charge.low: 20 battery.charge.warning: 20 battery.runtime: 23917 battery.temperature: 49.0 battery.type: PbAc battery.voltage: 39.0

Sorry for my delay, I've only just read this mail. At first glance the driver looks like it should work, I will test it tomorrow (if possible) and let you know. I'll also give a reply to your questions. Many thanks for the work you've already put into this. -------------------------------------------------- From: <hyouko at gmail.com> Sent: Monday, June 30, 2014 12:42 AM To:

Sorry for the huge delay and thanks Charles for taking care of this topic. >> I'm running OpenSuse 13.1 and I have a Lupus 500 USB (Fideltronik) >> >> After quite a bit of playing around I managed to get the status of the UPS using the blazer_usb driver and running NUT 2.6.5. >> But unfortunately none of the Instcmds such as load.off etc. worked. > > Can you post

Finally I got time to test this. >>> Can you post the output of upsc, and note if any of those values look >>> wrong? serwer2:/tmp/nut-fabula # upsc myups battery.charge: 100 battery.voltage: 13.10 battery.voltage.high: 13.00 battery.voltage.low: 10.40 battery.voltage.nominal: 12.0 device.model: 500VA UPS device.type: ups driver.name: nutdrv_qx driver.parameter.pollfreq: 30

Hello all, long time away from this list, glad to be around again! I have this Powercom Vanguard VGN VGD-20K31. Some details of this model: * 3-phase input, single phase output * Model has 240V / 12V9AH x 20 x 2SET, plus another set of 20 batteries. All in all, 3 sets * Serial connection to Windows 2k3 server with UPSMon Now I was strongly considering replacing the bundled no-good upsmoon

Hi, I try to install the newhidups driver for a MGE Pulsar M2200 connected to a USB port under Linux Red Hat 4 Upd 4. I have compiled and installed the usb driver (make usb && make install-usb). I followed the instructions in /nut-2.0.5/scripts/hotplug-ng/README abour the /etc/udev/rules.d/025_nut-usbups.rules. The ups is recognized by the kernel: Mar 12 14:52:03 serveur1 kernel: usb

Hi, I try to install the newhidups driver for a MGE Pulsar M2200 connected to a USB port under Linux Red Hat 4 Upd 4. I have compiled and installed the usb driver (make usb && make install-usb). I followed the instructions in /nut-2.0.5/scripts/hotplug-ng/README abour the /etc/udev/rules.d/025_nut-usbups.rules. The ups is recognized by the kernel: Mar 12 14:52:03 serveur1 kernel: usb

2009/1/22 Spiros Ioannou <sivann at gmail.com> > Cher Arnaud, > Hi Spiros, > I send you a demo that reads info from an Emerson Liebert > GXT2-10000T230 through the RS-232 port. This uses the "ESP-II (ESP 2) > Protocol". > Current supported data includes: measurements (voltage, temperature, > etc) , ID strings (serial number, etc), status flags (inverter on,

Hi! I am not really experienced with UPS devices or UPS control software like NUT but i am enthusiastic and trying to use Eaton-9130 (it has one extra EBM too) as rationally as possible with NUT. I believe in general things are under control and behave, although i have some glitches and i would like to ask for help. I am using Debian v. 7 amd64 and from its packages nut-server and nut-client, v.