search for: 2200bg

I am going to be setting up an Intel 2200bg card this evening. I was wondering if anyone is using this (successfully) with CentOS 4. The directions look straightforward, but please let me know if you had to do anything interesting/undocumented to make it work. I am also wondering if people are using the driver provided with the current Ce...

Using CentOS 5 - installed ipw2200 firmware and tried to set up new eth1 wifi device, but adapter Intel Coporation PRO/Wireless 2200BG doesn't show up in list of adapters when I try add New Device (ipw2200 does show up on hardware tab as ipw2200 eth1 ethernet configured). I've noticed that when I run system-config-network on command line, these errors show up: (system-config-network:3160): libglade-WARNING **: Error loadi...

....rf from RPMForge using yum OK. I've loaded the ipw modules with /sbin/modprobe ipw2200 and then /sbin/lsmod | grep ipw which gives: ipw2200 136873 0 ieee80211 33417 1 ipw2200 However, when I run system-config-network I don't see Intel Coporation PRO/Wireless 2200BG (eth1) in the list of adapters. Also, when I type the following command # dmesg | grep ipw I get this message: ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq ipw2200: Copyright(c) 2003-2006 Intel Corporation usbcore: registered new driver ipwtty drivers/usb/serial/ipw.c: IPWire...

....ces.clemson.edu/linux/fc2- ipw2200.shtml and http://www.centos.org/modules/newbb/viewtopic.php? topic_id=2532&forum=30 regarding use of ipw2200, which is included in the kernel. The problem is that it doesn't appear to be actually installed/loaded because the Intel Corporation PRO/Wireless 2200BG driver doesn't appear in the drop- down list under Devices > New > Wireless Connection in system-config- network. Also /sbin/lsmod | grep ipw doesn't produce anything - so I'm pretty baffled! Any suggestions please? Andy

...BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 02) Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) Latitude D810 A05, (PATA drive) Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express [14e4:1677] (rev 01) Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05) Latitude D505 A11, (PATA drive) Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03) Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller [8086:103d] (rev 81) If someone is curious to recreate this error...

...ess 2200/2915 Network Driver, 1.0.0 Dec 24 16:45:43 localhost kernel: ipw2200: Copyright(c) 2003-2004 Intel Corporation Dec 24 16:45:43 localhost kernel: ACPI: PCI interrupt 0000:04:02.0[A] -> GSI 11 (level, low) -> IRQ 11 Dec 24 16:45:43 localhost kernel: ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection Dec 24 16:45:44 localhost hald[3408]: Timed out waiting for hotplug event 577. Rebasing to 578 Dec 24 16:45:44 localhost kernel: ip_tables: (C) 2000-2002 Netfilter core team Dec 24 16:46:00 localhost hald[3408]: Timed out waiting for hotplug event 580. Rebasing to 581 Dec 24 16:4...

...k but there's no sound from the intel hda and the wireless find AP's but doesn't connect. below is the lspci output of the devices: Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection I'm already using the most recent version of the ipw firmware ... [root at localhost ~]# rpm -q ipw2200-firmware ipw2200-firmware-2.4-2.0.rf any tips ? cheers, Nick -- Nicholas Anderson Administrador de Sistemas Unix LPIC-1 Certified Rede Fiocruz

After reading that someone had problems with 802.11i/WPA2, I tested my iwi device, too. 802.11i (as client) works, but disconnects about every five minutes briefly, which is nothing new -- I had the same issue with 6.2-RELEASE. In contrast to 6.2-RELEASE, monitor does not work. Kismet does not receive anything, while it does with ath or ural (even at the same time). dmesg with debug.iwi=2 is

...ation 82801FBM (ICH6M) SATA Controller (rev 0 4) 01:00.0 VGA compatible controller: ATI Technologies Inc M24 [Radeon Mobility X60 0] 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 PCI-E Fast Et hernet Controller (rev 10) 06:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Ne twork Connection (rev 05) 06:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 06:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller 06:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/M...

...ebook, but I can't configure my network bridge in Ubuntu. I'm really desperate, so I hope somebody can point me out what I'm doing Hardware: ----------------------------------------------------------- $ lspci | grep controller 06:05.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05) 06:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10) ----------------------------------------------------------- Kernel: ----------------------------------------------------------- $ uname -a Linux Bacardi 2.6.24-23-generic #1...

Hi, Did anyone else experience this? With 9.1-BETA1 the boot process freezes, among the last lines with verbose boot are acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times after this, dead. What is supposed to happen in the next stage? This laptop worked fine with 9-STABLE to at least february. //per

I just updated to RELENG_7 from 6.2 and I'm running into some really annoying issues with jerky mouse movement and skipping sound. This seems to be similar to: Re: SCHED_4BSD in RELENG_7 disturbs workflow This happens both with 4BSD and ULE. I seems to happen when I'm compiling ports and a new cc/bzip2/sh process fires off (I'm just watching top), I'll get the skip/freezeup.

Hello, I tried out kernel 3.1.0-rc2 on my i386 Laptop with Xen 4.1.1. Booting hangs after these messages on the VGA console: pci 0000:02:09.0: address space collision: [mem 0x000da000-0x000dafff] conflicts with reserved [mem 0x0009f800-0x000fffff] reserve RAM buffer: 00000000 0009f000 - 00000000 0009ffff reserve RAM buffer: 00000000 38400000 - 00000000 3bffffff reserve RAM buffer: 00000001

Hello, I tried out kernel 3.1.0-rc2 on my i386 Laptop with Xen 4.1.1. Booting hangs after these messages on the VGA console: pci 0000:02:09.0: address space collision: [mem 0x000da000-0x000dafff] conflicts with reserved [mem 0x0009f800-0x000fffff] reserve RAM buffer: 00000000 0009f000 - 00000000 0009ffff reserve RAM buffer: 00000000 38400000 - 00000000 3bffffff reserve RAM buffer: 00000001