search for: 10seconds

Hello, Today my server stopped responding. i went to the console and on the screen there were a continuous loop of the following info shown on the screen: BUG: soft lockup - CPU#0 stuck for 10s! [java:13959] and alot of other information. ii've took a screen shot of the info shown , you can find it under the following url: http://img585.imageshack.us/i/img00012201103070833.jpg/ and had to

This should be a pretty easy issue to reproduce, at least it seems to happen to me very often. (gluster-3.2.5) After storage backend(s) have been rebooted, the client mounts are often broken until you unmount and remount. Example from this morning: I had rebooted storage servers to upgrade them to ubuntu 12.04. Now at the client side: $ ls /gluster/scratch ls: cannot access /gluster/scratch:

Hi, as I promised in LARTC list I created patch for new connbytes match. It matches packets which bellongs to connection which transfered given range of bytes. For those interested it is at http://luxik.cdi.cz/~devik/connbytes/ It was originaly meant to be used with HTB or other qdisc to reclassify long download streams to lower prio class. devik

...oth these phones are using ULAW to the server, and we have plenty of G729 licenses on the server. Now the BudgetTone does not have any problems at all. The Cisco however has severe breakup on the incoming audio from the VoIP provider. The caller can hear me fine. In some cases the call is okay for 10seconds or so then slowly gets worse, but most of the time I just cant make out what they are saying. The link we are running this on is a 1500/256 ADSL line, we are not running much else on this link so it does not appear to be bandwidth related. I tried changing codecs that the phone uses, in particula...

...th 3000 files, created with the following script: for i in {1..3000}; do dd if=/dev/urandom of=test$i bs=512k count=1; done ? When i save a file with word2010/2013 to this folder, everything works. But when i enable "hide unreadable=yes" on this share, File saving with word needs about 10seconds! ? The user can read everything on this share. What is the problem?? ? This problem is also reproduceable on other samba servers. Thanks ?

...ess@arretni.com> > Sent: Tuesday, December 23, 2003 12:36 PM > Subject: Re: [Asterisk-Users] Fw: Questions and finding > > > > Hi! > > > > > 1.) First test > > > - ATA1 calls to ATA2. When voicemail starts playing, it just cuts-off > > > after 5-10seconds (consistently). > > > - Solution: I have to reconfigure ATA to use OutboundProxy to be > Asterisk > > > IP. > > > - Am I doing the right thing? > > > > Turn of silence detection / VAD. > > > > > Any solution to this one? > > > My thi...

Hi, I have just setup a DISA setup whereby people can dial in, authenticate, are given a dialtone and can then call out. Everything works however there is a 10 second delay after the user enters the number and presses #, until the system does anything. Here is the relevant section from my extensions.conf: -------------- next part -------------- An HTML attachment was scrubbed... URL:

...ave a problem with rufus. I created a test.rb file in the /config/ initializers folder. test.rb require ''rubygems'' require ''rufus/scheduler'' scheduler = Rufus::Scheduler.start_new scheduler.each ''10s'' do puts "hey see you in 10seconds!" end works fine so far. Now I change it to: test.rb require ''rubygems'' require ''rufus/scheduler'' scheduler = Rufus::Scheduler.start_new scheduler.each ''10s'' do recipe = Recipe.check_for_new_print_jobs end And here I...

...shown: receiving file list ... done zTransfer/html/thumbs/12592.jpg zTransfer/html/thumbs/12593.jpg zTransfer/html/thumbs/12594.jpg <blah blah blah.. > zTransfer/html/thumbs/12596.jpg zTransfer/html/thumbs/12597.jpg Then it just hangs like this, nothing else happens. The rsync lasts around 10seconds I don't know what is going on, rsyncing to other hosts works fine, just this host is acting up. The host is in a LAN with me and connection is fine. Firewall is off, What else can be the problem? Any reply will be appreciated Thanks! -- Configure bugmail: https://bugzilla.samba.org/userpr...

...server WITHOUT any telco board (i.e., digium). Installation looks ok, however I am having problems. MY SETUP: 2xATAs are configured to use * as GkorProxy Asterisk is registered to my SER SIP/RTP Proxy 1.) First test - ATA1 calls to ATA2. When voicemail starts playing, it just cuts-off after 5-10seconds (consistently). - Solution: I have to reconfigure ATA to use OutboundProxy to be Asterisk IP. - Am I doing the right thing? 2.) Second test: - ATA1 calls ATA2 and left a message. * sends an email to the owner of ATA2. - ATA2 retrieves the message by dialing the extension (i.e., exten=>9999,1...

Hello! I got my hands on a CyberPower 1500AVRT, and i'm trying to get it connected to my Gentoo machine. I've followed all the basic guides on setting up NUT and UPS' but have had no luck. My current ups.conf is: [cyberpower-gentoo] driver = cyberpower port = /dev/ttyS0 desc = Workstation Upon running /etc/init.d/upsd start or upsdrv start I get: * Starting

Hi! Maybe you can help me, would be very nice! I'm new to the list and I'm very glad that it exists... A week ago we migrated to samba and since then it's taking very long to save a 1,8MB excel document. On fast ethernet it takes us about 10 seconds, on wireless lan it can take up to a minute, although transferring the same amount of data from the very same machine, that is

Right now, you can configure most bridge device parameters via sysfs. However, you cannot either: - add or remove bridge interfaces - add or remove physical interfaces from a bridge The attached patch set rectifies this. With this patch set, brctl (theoretically) becomes completely optional, much like ifenslave is now for bonding. (In fact, the idea for this patch, and the syntax used herein, is