> Thanks for the reply.
>
> 1. My VAD is turned off (00140014), and it didn't help for that
cut-off.
I> am not sure if OutboundProxy has to be configured to have it working fine.
> Or this just happened to me? What is your ATA's software?
>
> 2. I tried dtmfmode=inband on sip.conf, and dtmfmode=rfc2833. None
worked.> As per ATA, it is by default using rfc2833. I tried setting it up as
inband> by setting Audiomode, but nothing helped. I was thinking the * is ONLY
> recognizing the DTMF if there is telco board installed. Is it?
>
>
> ----- Original Message -----
> From: "Philipp von Klitzing"
<klitzing@pool.informatik.rwth-aachen.de>
> To: "Jess Magnaye" <jess@arretni.com>
> Sent: Tuesday, December 23, 2003 12:36 PM
> Subject: Re: [Asterisk-Users] Fw: Questions and finding
>
>
> > Hi!
> >
> > > 1.) First test
> > > - ATA1 calls to ATA2. When voicemail starts playing, it just
cuts-off
> > > after 5-10seconds (consistently).
> > > - Solution: I have to reconfigure ATA to use OutboundProxy to be
> Asterisk
> > > IP.
> > > - Am I doing the right thing?
> >
> > Turn of silence detection / VAD.
> >
> > > Any solution to this one?
> > > My thinking was that DTMF can only be detected by *
> >
> > Take a look at your SIP configuration and make sure you have the
correct
> > dtmfmode= set. Try different values if you continue to have trouble
and
> > configure your ATA accordingly.
> >
> > Cheers, Philipp
> >
> >
>
