search for: 0x10101

...tried an older version). When using the Capi-Channel, everything works fine except from the sound it sounds extremely choppy and is unusable :-( When e.g. capisuite is used for fax, everything sounds fine... I found the following when using capi debug: ISDN1#02: too much voice to send for NCCI=0x10101 Google finds nothing relevant for this error message :-( Has anybody any idea ? Christoph P.S.: Here is the output of capi debug CONNECT_IND ID=002 #0x016e LEN=0037 Controller/PLCI/NCCI = 0x101 CIPValue = 0x10 CalledPartyNumber = <c1>...

...= <11 83>32478540441 ConnectedSubaddress = default LLC = default > sent CONNECT_ACTIVE_RESP (PLCI=0x101) -- sent CONNECT_B3_REQ (PLCI=0x101) -- CONNECT_B3_CONF ID=003 #0x0845 LEN=0014 Controller/PLCI/NCCI = 0x10101 Info = 0x0 -- CONNECT_B3_CONF ID=003 #0x0845 LEN=0014 Controller/PLCI/NCCI = 0x10101 Info = 0x0 -- CONNECT_B3_ACTIVE_IND ID=003 #0x8121 LEN=0013 Controller/PLCI/NCCI = 0x10101 NCPI...

...15291:b${EXTEN:1}|30) nothing changes (no dialtone). If in this example the called party discards the call, there is no signalling to my SIP-Phones. In this case "capi debug" tells a lot of: -------- -- CONNECT_B3_ACTIVE_IND ID=001 #0xb2f4 LEN=0013 Controller/PLCI/NCCI = 0x10101 NCPI = default > sent CONNECT_B3_ACTIVE_RESP (NCCI=0x10101) > sent DATA_B3_RESP (NCCI=0x10101) > sent DATA_B3_RESP (NCCI=0x10101) > sent DATA_B3_RESP (NCCI=0x10101) > sent DATA_B3_RESP (NCCI=0x10101) > sent DA...

..._von_ntba_primux_immediate_no.txt". This seems to be the same behaviour as someone on this list had this week. So I tried with immediate=yes "eingehend_von_ntba_primux.txt". There is no ringing on my sip phone and chan-capi-cm says capicard_primux_2_1: too much voice to send for NCCI=0x10101 Any hints? Thanks in advance Christian Peter -------------- next part -------------- -- Executing SetCallerID("SIP/10-dec7", "10 <10>") in new stack -- Executing Goto("SIP/10-dec7", "pbx_incoming_ip_telefon_1_autocontext_2|BYEXTENSION|1") in...

...CONNECT_ACTIVE_IND ID=004 #0x031b LEN=0015 Controller/PLCI/NCCI = 0x101 ConnectedNumber = default ConnectedSubaddress = default LLC = default -- CONNECT_B3_IND ID=004 #0x031c LEN=0013 Controller/PLCI/NCCI = 0x10101 NCPI = default -- CONNECT_B3_ACTIVE_IND ID=004 #0x031d LEN=0013 Controller/PLCI/NCCI = 0x10101 NCPI = default -- Executing capiHOLD("CAPI[contr1/30]/0", "") in new stack -- FACILITY_CONF ID=004...

...terisk-pri-1:/etc/asterisk # cat extensions.conf [general] static=yes writeprotect=yes [globals] [default] exten => _X.,1,Playtones(ring) exten => _X.,2,Dial,CAPI/0226265583:${EXTEN} exten => _X.,3,HangupSIP/2.7.184.61-08152880 -- CAPI Hangingup > sent DISCONNECT_B3_REQ NCCI=0x10101 > sent DISCONNECT_REQ PLCI=0x101 -- removed pipe for PLCI = 0x101 asterisk-pri-1:/etc/asterisk # cat sip.conf [general] context=default port=5060 bindaddr=192.168.1.101 srvlookup=no canreinvite=no disallow=all allow=alaw asterisk-pri-1:/etc/asterisk # cat...

...stack -- creating pipe for PLCI=-1 > sent CONNECT_REQ MN =0xc -- Called 0:b803121 -- CAPI[contr1/0]/2 is making progress passing it to SIP/stefanof-194a > sent CALLEDPARTYNUMBER INFO digit = 3 (PLCI=0x101) -- CAPI Hangingup > sent DISCONNECT_B3_REQ NCCI=0x10101 > sent DISCONNECT_REQ PLCI=0x101 -- removed pipe for PLCI = 0x101 == Spawn extension (outgoing, 803121, 3) exited non-zero on 'SIP/stefanof-194a' You can easily find that there is obviously NO ANSWER to the call, nor RINGING advice. When I, hearing voice from external PBX,...

...ying 'vm-password' (language 'en') May 13 20:22:11 WARNING[1114581936]: app_voicemail.c:2764 vm_execmain: Unable to read password == Spawn extension (default, 51121, 2) exited non-zero on 'CAPI[contr1/10151121]' -- CAPI Hangingup > sent DISCONNECT_B3_REQ NCCI=0x10101 > sent DISCONNECT_REQ PLCI=0x101 -- removed pipe for PLCI = 0x101 ------------------------------------------- Bug or Feature ? regards Andreas

.../12346-457f", "CAPI/0442607572:b012669095|30") in new stack -- creating pipe for PLCI=-1 > sent CONNECT_REQ MN =0x4 -- Called 0442607572:b012669095 -- CAPI[contr1/0442607572]/0 answered SIP/12346-457f <--------------- -- CAPI Hangingup > sent DISCONNECT_B3_REQ NCCI=0x10101 > sent DISCONNECT_REQ PLCI=0x101 I've marked the interesting line. After begining to dial, the lines until "Called 044..." appear. Then nothing happens besides the real phone actually ringing. Even if I answer it, nothing happens in Asterisk or in X-Lite. Then, when I hang...

...86764 1 capifs is mounted too (I am not sure I need this, though): root@trident iaxcomm # mount ... capifs on /dev/capi type capifs (rw) These are the contents of /proc/capi ----------------------> /proc/capi/capidrv 0 0 111 0 ----------------------> /proc/capi/capi20ncci 2 0x10101 ----------------------> /proc/capi/capi20 0 0 0 0 0 0 0 2 7868 7482 7488 7862 ----------------------> /proc/capi/driver ----------------------> /proc/capi/applstats 1 0 0 111 0 2 7868 7482 7488 7862 ----------------------> /proc/capi/applications 1 -2 16 2048 2 2 8 2048 -----------...

...Controller/PLCI/NCCI = 0x101 NCPI = default -- ISDN1#02: sent CONNECT_B3_REQ PLCI=0x101 CAPI: ApplId=0x0002 Command=0x82 SubCommand=0x81 MsgNum=0x0005 NCCI=0x00010101 CONNECT_B3_CONF ID=002 #0x0005 LEN=0014 Controller/PLCI/NCCI = 0x10101 Info = 0x0 Speicherzugriffsfehler (core dumped) srvpbx:/usr/src/chan-capi-trunk# -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: gdb1.txt Url: http://lists.digium.com/pipermail/asterisk-users/attachments/2010030...

...can line time: 0ms at 3.85 l/mm: T7.7 = T3.85 R8x15.4lines/mm OK Inch-based resolution preferred: no Metric-based resolution preferred: no Minimum scan line time for higher resolutions: T15.4 = T7.7 >>> DIS: 80 00 c6 f0 80 80 01 -- CAPI Hangingup > sent DISCONNECT_B3_REQ NCCI=0x10101 > sent DISCONNECT_REQ PLCI=0x101 -- removed pipe for PLCI = 0x101