search for: 09ae

...id-ups, googled very long about the problems, but didn't get it to run. Does someone has experiences or similar problems? lsusb and lsmod are all right in /etc/udev/rules.d/52_nut-usbups.rules I found one line according to the modell ---- # Tripp Lite - tripplite_usb SYSFS{idVendor}=="09ae", SYSFS{idProduct}=="0001", MODE="664", GROUP="nut" # Tripp Lite - usbhid-ups SYSFS{idVendor}=="09ae", SYSFS{idProduct}=="1003", MODE="664", GROUP="nut" SYSFS{idVendor}=="09ae", SYSFS{idProduct}=="1007",...

...t0 }, /* e.g. ? */ diff --git a/src/nut/nut-2.4.3/scripts/udev/52-nut-usbups.rules b/etc/udev/rules.d/52-nut-usbups.rules index c8f0437..fbb03df 100644 --- a/src/nut/nut-2.4.3/scripts/udev/52-nut-usbups.rules +++ b/etc/udev/rules.d/52-nut-usbups.rules @@ -92,6 +92,8 @@ ATTR{idVendor}=="09ae", ATTR{idProduct}=="1008", MODE="664", GROUP="nut" ATTR{idVendor}=="09ae", ATTR{idProduct}=="2005", MODE="664", GROUP="nut" # e.g. TrippLite OMNI900LCD - usbhid-ups ATTR{idVendor}=="09ae", ATTR{idProduct}==&qu...

...Your support is really appreciated for getting it solved. Best Regards, Olaf *lsusb* Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 003: ID 09ae:3024 Tripp Lite OMNIVSX850 Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub config#1 in OMV: driver = usbhid-ups #driver = tripplite_usb port = auto #vendorid...

...t for newhidups recently, and I wonder if you have any feedback. Did you ever get this device to work? >From the information you sent, it looks like it quite might be a proper HID power class device (not serial-over-usb). If you could run (as root) newhidups -u root -DD -x generic -x vendorid=09ae auto we might be able to confirm whether this is the case. In case the above test succeeds, I might be able to add explicit support for this device to newhidups. It's the only device with device ID 09ae:1003 that I have seen so far. Thanks, -- Peter Forwarded message: > Date: Wed, 08 F...

...ovided USB cable, and that much appears to work: # dmesg | grep -i tripp hiddev96: USB HID v1.10 Device [Tripp Lite TRIPP LITE SMART2200RMXL2U ] on usb-0000:00:1f.4-2 # lspci | grep -i usb 00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #2) (rev 01) # lsusb Bus 001 Device 003: ID 09ae:3012 Tripp Lite Bus 001 Device 001: ID 0000:0000 However, the tripplite_usb driver doesn't seem to find the UPS: # tripplite_usb -u root -DDDDDD auto Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.0.3) Warning: This is an experimental driver. Some features may not function...

...alhost ~]# cat /sys/module/usbcore/parameters/autosuspend -1 [root at localhost ~]# tail -f /var/log/messages Jun 24 13:37:33 localhost kernel: usb 2-2.1: Product: Tripp Lite UPS Jun 24 13:37:33 localhost kernel: usb 2-2.1: Manufacturer: Tripp Lite Jun 24 13:37:33 localhost kernel: hid-generic 0003:09AE:2012.0005: hiddev0,hidraw1: USB HID v1.10 Device [Tripp Lite Tripp Lite UPS ] on usb-0000:02:02.0-2.1/input0 Jun 24 13:37:48 localhost kernel: usb 2-2.1: USB disconnect, device number 7 Jun 24 13:37:51 localhost kernel: usb 2-2.1: new low-speed USB device number 8 using uhci_hcd Jun 24 13:37:51 lo...

...may not function correctly. ... Checking device (045E/0039) (005/004) - VendorID: 045e - ProductID: 0039 - Manufacturer: Microsoft - Product: Microsoft 5-Button Mouse with IntelliEye(TM) - Serial Number: unknown - Bus: 005 Trying to match device Device does not match - skipping ... Checking device (09AE/2005) (001/006) - VendorID: 09ae - ProductID: 2005 - Manufacturer: Tripp Lite - Product: TRIPP LITE UPS - Serial Number: 692199 B - Bus: 001 Trying to match device Device does not match - skipping ... No appropriate HID device found No matching USB/HID UPS found" "sudo /lib/nut/newhidup...

On Sep 22, 2014, at 11:14 AM, Shade Alabsa <shade34321 at gmail.com> wrote: > These machines are exact replicas of each other and are fairly old and have a Core 2 Duo E8400 CPU in them. Is there anything else you need or anything I can do to help fix this? Thanks! Also, Barry Skrypnyk mentioned that Fedora was one of the Linux distributions that Tripp Lite claims to support. I recommend

...ere correct about the serial number reporting “0”): Jun 21 11:34:49 localhost kernel: usb 8-2: USB disconnect, device number 103 Jun 21 11:34:49 localhost kernel: usb 8-2: new low-speed USB device number 104 using xhci_hcd Jun 21 11:34:49 localhost kernel: usb 8-2: New USB device found, idVendor=09ae, idProduct=2012 Jun 21 11:34:49 localhost kernel: usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jun 21 11:34:49 localhost kernel: usb 8-2: Product: Tripp Lite UPS Jun 21 11:34:49 localhost kernel: usb 8-2: Manufacturer: Tripp Lite Jun 21 11:34:50 localhost kernel: hid-generi...

...ems fine). Here’s an example of the drops in /var/log/messages (I’ll use CentOS 7.6 as my reference point throughout this email): May 29 19:25:27 localhost kernel: usb 2-2.1: new low-speed USB device number 6 using uhci_hcd May 29 19:25:27 localhost kernel: usb 2-2.1: New USB device found, idVendor=09ae, idProduct=2012 May 29 19:25:27 localhost kernel: usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 May 29 19:25:27 localhost kernel: usb 2-2.1: Product: Tripp Lite UPS May 29 19:25:27 localhost kernel: usb 2-2.1: Manufacturer: Tripp Lite May 29 19:25:27 localhost kernel: hid-gene...

Hello! I am currently having issues monitoring a Tripp-Lite AVR900U. First, here are a few system details: > Manjaro Linux - kernel 5.4.30-1 > network-ups-tools 2.7.4-5 (built from Arch User Repository) > (lsusb output) Bus 003 Device 003: ID 09ae:3024 Tripp Lite AVR900U Contents of /etc/ups/ups.conf: > [tripplite] > driver =  usbhid-ups > port = auto Contents of /etc/udev/rules.d/50-ups.rules: > SUBSYSTEM=="usb", ATTR{idVendor}=="09ae", ATTR{idProduct}=="3024", SYMLINK+="ups0", GRO...

Since version 2.0.5 the AVR550U is supported. The X version however is not. The difference, as far as I can see, is the voltage 120V (non-X) vs 230V (X). Is there a way to fake the productid of the X version? Or, alternatively will the X version be supported in the future? Checking device (09AE/1009) (001/004) - VendorID: 09ae - ProductID: 1009 - Manufacturer: Tripp Lite - Product: TRIPP LITE UPS - Serial Number: FW-2473 A - Bus: 001 Trying to match device This Tripp Lite device (09ae:1009) is not (or perhaps not yet) supported by usbhid-ups. Please make sure you have an up-to-date versio...

...point of confirming the fix here and then having this as a fallback if it comes up again. Below is output from the virtual machine: [npg at localhost ~]$ uname -r 3.10.0-957.el7.x86_64 [npg at localhost ~]$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 014: ID 09ae:2012 Tripp Lite Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub [npg at localhost ~]$ upsd -V Network UPS Tools upsd 2.7.2 [npg at localhost ~]$ upsc TrippLiteUPS...

.... Fedora - Sep 19 19:46:19 nemo usbhid-ups[1595]: libusb_get_interrupt: No such device or address Sep 19 19:46:19 nemo usbhid-ups[1595]: libusb_get_report: No such device or address Sep 19 19:46:20 nemo kernel: usb 8-1: SerialNumber: 2424AY0SM882300229 Sep 19 19:46:20 nemo kernel: hid-generic 0003:09AE:3015.0007: hiddev0,hidraw2: USB HID v1.10 Device [Tripp Lite TRIPP LITE SMART1500RM2UN ] on usb-0000:00:1d.2-1/input0 Sep 19 19:46:20 nemo mtp-probe[1689]: checking bus 8, device 7: "/sys/devices/pci0000:00/0000:00:1d.2/usb8/8-1" Sep 19 19:46:20 nemo mtp-probe[1689]: bus: 8, device: 7 wa...

...ps > > port = auto > > productid = 3016 > > desc = "Tripp Lite UPS, USB Interface" Configuration looks good. > > Data from the usbhid-ups command > > <<...>> This part confuses me: 68.487087 Checking device (09AE/3016) (004/008) 68.564137 - VendorID: 09ae 68.564168 - ProductID: 3016 68.564174 - Manufacturer: Tripp Lite 68.564220 - Product: TRIPP LITE UPS 68.564225 - Serial Number: 2406CVLSM871900494 68.564231 - Bus: 004 68.564235 Trying to match device 68.564255...

"Can't claim USB device [09ae:3024]: could not detach kernel driver from interface 0: Operation not permitted" Is probably an issue with NUT grabbing the UPS... can you disconnect and reconnect the USB cable and try again? If that fails, maybe a udev rule will help. Thank you, David Zomaya Tripp Lite <http://www.t...

...Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 008: ID 09ae:3016 Tripp Lite Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Output from syslog Regards, Barry -------------- next part -------------- An HTML attachme...

...d = 3016 > > > > desc = "Tripp Lite UPS, USB Interface" > > Configuration looks good. > > > > > Data from the usbhid-ups command > > > > <<...>> > > This part confuses me: > > 68.487087 Checking device (09AE/3016) (004/008) > 68.564137 - VendorID: 09ae > 68.564168 - ProductID: 3016 > 68.564174 - Manufacturer: Tripp Lite > 68.564220 - Product: TRIPP LITE UPS > 68.564225 - Serial Number: 2406CVLSM871900494 > 68.564231 - Bus: 004 > 68.564235 T...

Hey all, I am trying to use NUT for a Tripplite Smart1200 LCD on a fresh copy of Debian 6.0.2.1. I installed NUT version 2.4.3 and I have pored through pages and pages of other posts, but for the life of me I can not get it to recognize the Tripplite. I know its an 09ae:2009 device and I've tried to add a rule in /lib/udev/rules.d/52-nut-usbups.rules as according to some posts, but to no avail. Whenever I try to run upsdrvctl start, it always returns: Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB commun...

...s. I've modified it for use with a Tripp Lite UPS and 3024 protocol below. Try disconnect/reconnect after and see what happens. :/etc/nut$ cat /etc/udev/rules.d/90-nut-ups.rules # /etc/udev/rules.d/90-nut-ups.rules ACTION=="add", \ SUBSYSTEM=="usb", \ ATTR{idVendor}=="09ae", ATTR{idProduct}=="3024", \ MODE="0660", GROUP="nut" Thank you, David Zomaya Tripp Lite ________________________________ From: Tom Cooper <tom at cooperfamily.xyz> Sent: Wednesday, May 20, 2020 2:02 PM To: David Zomaya Cc: nut-upsuser Subject: Re: [...