samba - Mar 2020 - Debian Buster Samba 4.12 (experimental packages) amd64/i386

Hai Guys, 
 
I've uploaded the Debian Buster samba 4.12 packages to the
buster-experimental repo.
These need some extra love in tests, so if your able to please these a bit. 
And report back to me/the samba list. 

ONLY amd64 and i386 Packages. (sorry armhf is still building) 
 
Repo setup.
wget -O - http://apt.van-belle.nl/louis-van-belle.gpg-key.asc | apt-key add -
echo "deb http://apt.van-belle.nl/debian buster-experimental main contrib
non-free" | sudo tee -a /etc/apt/sources.list.d/van-belle.list

# all sources are all available through 
echo "deb-src http://apt.van-belle.nl/debian buster-experimental main
contrib non-free" | sudo tee -a /etc/apt/sources.list.d/van-belle.list

If you want to look at the buildlogs:
https://downloads.van-belle.nl/samba4/Buildlogs/buster/

Please beware, after testing remove the buster-experimental or disable it. 
These repo's with xxxxx-experimental might cointain failing packages .. 
I DON'T recommend these to use on production servers yet. 

So far these all look good. Install as you would do normally. 

Have good weekend..

Greetz, 

Louis

Hi Louis,

For the earlier issue on deb 4.7.6 packages I have not been able to 
understand what we did wrong, we recompiled with the same clean setup 
and where not able to reproduce the issue... I've tried to look for 
different dependencies updates and couldn't find any differences. I'm 
puzzled.

Anyway I've compiled Samba 4.11.7 and Samba 4.12.0 for CentOS7 and 
CentOS8 packages:

https://samba.tranquil.it/centos7/samba-4.11.7/
https://samba.tranquil.it/centos7/samba-4.12.0/
https://samba.tranquil.it/centos8/samba-4.11.7/
https://samba.tranquil.it/centos8/samba-4.12.0/

Packages for Centos8 and Samba 4.12.0 are still experimental as not yet 
tested in production, but I hope to be able to go forward on that soon 
as CentOS8 is now getting more traction.

The rpm are backported from Fedora 32 packages using the great work from 
Gunter et al. by switching from MIT kerberos to Heimdal and fixing a few 
dependencies versions. Centos7 need porting of newer gnutls (thanks to 
Niko Kadel Garcia) and Centos8 need a few extra packages that are not 
yet packaged in EPEL.

You might take a look at rst/sphinx for documenting the installation of 
your packages, it makes nice docs! You may take a look at our doc for 
inspiration (note: there may be still a few pieces of French here and 
there, translation is going on :-) but it should be mostly 
understandable) : 
https://dev.tranquil.it/samba/en/samba_config_server/centos7/server_install_samba_centos.html

Cheers,

Denis



Le 20/03/2020 ? 15:12, L.P.H. van Belle via samba a
?crit?:
> Hai Guys,
>   
> I've uploaded the Debian Buster samba 4.12 packages to the
buster-experimental repo.
> These need some extra love in tests, so if your able to please these a bit.
> And report back to me/the samba list.
> 
> ONLY amd64 and i386 Packages. (sorry armhf is still building)
>   
> Repo setup.
> wget -O - http://apt.van-belle.nl/louis-van-belle.gpg-key.asc | apt-key add
-
> echo "deb http://apt.van-belle.nl/debian buster-experimental main
contrib non-free" | sudo tee -a /etc/apt/sources.list.d/van-belle.list
> 
> # all sources are all available through
> echo "deb-src http://apt.van-belle.nl/debian buster-experimental main
contrib non-free" | sudo tee -a /etc/apt/sources.list.d/van-belle.list
> 
> If you want to look at the buildlogs:
https://downloads.van-belle.nl/samba4/Buildlogs/buster/
> 
> Please beware, after testing remove the buster-experimental or disable it.
> These repo's with xxxxx-experimental might cointain failing packages ..
> I DON'T recommend these to use on production servers yet.
> 
> So far these all look good. Install as you would do normally.
> 
> Have good weekend..
> 
> Greetz,
> 
> Louis
> 
> 
>

BTW,
Thank you Denis for these packages (also including the source rpms).
Kind regards,

,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,
Vincent S. Cojot, Computer Engineering. STEP project.
_.,-*~'`^`'~*-,._.,-*~
Ecole Polytechnique de Montreal, Comite Micro-Informatique.
_.,-*~'`^`'~*-,.
Linux Xview/OpenLook resources page
_.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'
http://step.polymtl.ca/~coyote  _.,-*~'`^`'~*-,._ coyote at
NOSPAM4cojot.name

On Fri, 20 Mar 2020, Denis CARDON via samba wrote:
> Hi Louis,
>
> For the earlier issue on deb 4.7.6 packages I have not been able to 
> understand what we did wrong, we recompiled with the same clean setup and 
> where not able to reproduce the issue... I've tried to look for
different
> dependencies updates and couldn't find any differences. I'm
puzzled.
>
> Anyway I've compiled Samba 4.11.7 and Samba 4.12.0 for CentOS7 and
CentOS8
> packages:
>
> https://samba.tranquil.it/centos7/samba-4.11.7/
> https://samba.tranquil.it/centos7/samba-4.12.0/
> https://samba.tranquil.it/centos8/samba-4.11.7/
> https://samba.tranquil.it/centos8/samba-4.12.0/
>
> Packages for Centos8 and Samba 4.12.0 are still experimental as not yet 
> tested in production, but I hope to be able to go forward on that soon as 
> CentOS8 is now getting more traction.
>
> The rpm are backported from Fedora 32 packages using the great work from 
> Gunter et al. by switching from MIT kerberos to Heimdal and fixing a few 
> dependencies versions. Centos7 need porting of newer gnutls (thanks to Niko
> Kadel Garcia) and Centos8 need a few extra packages that are not yet
packaged
> in EPEL.
>
> You might take a look at rst/sphinx for documenting the installation of
your
> packages, it makes nice docs! You may take a look at our doc for
inspiration
> (note: there may be still a few pieces of French here and there,
translation
> is going on :-) but it should be mostly understandable) : 
>
https://dev.tranquil.it/samba/en/samba_config_server/centos7/server_install_samba_centos.html
>
> Cheers,
>
> Denis
>
>
>
> Le 20/03/2020 ? 15:12, L.P.H. van Belle via samba a ?crit?:
>>  Hai Guys,
>>    I've uploaded the Debian Buster samba 4.12 packages to the
>>  buster-experimental repo.
>>  These need some extra love in tests, so if your able to please these a
>>  bit.
>>  And report back to me/the samba list.
>>
>>  ONLY amd64 and i386 Packages. (sorry armhf is still building)
>>    Repo setup.
>>  wget -O - http://apt.van-belle.nl/louis-van-belle.gpg-key.asc |
apt-key
>>  add -
>>  echo "deb http://apt.van-belle.nl/debian buster-experimental main
contrib
>>  non-free" | sudo tee -a /etc/apt/sources.list.d/van-belle.list
>>
>>  # all sources are all available through
>>  echo "deb-src http://apt.van-belle.nl/debian buster-experimental
main
>>  contrib non-free" | sudo tee -a
/etc/apt/sources.list.d/van-belle.list
>>
>>  If you want to look at the buildlogs:
>>  https://downloads.van-belle.nl/samba4/Buildlogs/buster/
>>
>>  Please beware, after testing remove the buster-experimental or disable
it.
>>  These repo's with xxxxx-experimental might cointain failing
packages ..
>>  I DON'T recommend these to use on production servers yet.
>>
>>  So far these all look good. Install as you would do normally.
>>
>>  Have good weekend..
>>
>>  Greetz,
>>
>>  Louis
>>
>>
>> 
>
> -- 
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
>

Good morning People, 

I hope everyone is still in good health. 

I've uploaded the Debian Buster armhf packages now also in the
buster-experimental repo.


Greetz, 

Louis

 
> -----Oorspronkelijk bericht-----
> Van: samba [mailto:samba-bounces at lists.samba.org] Namens 
> L.P.H. van Belle via samba
> Verzonden: vrijdag 20 maart 2020 15:12
> Aan: samba at lists.samba.org
> Onderwerp: [Samba] Debian Buster Samba 4.12 (experimental 
> packages) amd64/i386
> 
> Hai Guys, 
>  
> I've uploaded the Debian Buster samba 4.12 packages to the 
> buster-experimental repo. 
> These need some extra love in tests, so if your able to 
> please these a bit. 
> And report back to me/the samba list. 
> 
> ONLY amd64 and i386 Packages. (sorry armhf is still building) 
>  
> Repo setup.
> wget -O - http://apt.van-belle.nl/louis-van-belle.gpg-key.asc 
> | apt-key add -
> echo "deb http://apt.van-belle.nl/debian buster-experimental 
> main contrib non-free" | sudo tee -a 
> /etc/apt/sources.list.d/van-belle.list
> 
> # all sources are all available through 
> echo "deb-src http://apt.van-belle.nl/debian 
> buster-experimental main contrib non-free" | sudo tee -a 
> /etc/apt/sources.list.d/van-belle.list
> 
> If you want to look at the buildlogs: 
> https://downloads.van-belle.nl/samba4/Buildlogs/buster/ 
> 
> Please beware, after testing remove the buster-experimental 
> or disable it. 
> These repo's with xxxxx-experimental might cointain failing 
> packages .. 
> I DON'T recommend these to use on production servers yet. 
> 
> So far these all look good. Install as you would do normally. 
> 
> Have good weekend..
> 
> Greetz, 
> 
> Louis
> 
> 
> 
> -- 
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
> 
>

Hai Dennis, 

Is this still happening with the 4.12 packages.? 

The packages im build are doing with pbuilder/cowbuilder.

The setup is basicly, as base i started with : 
https://jodal.no/2015/03/08/building-arm-debs-with-pbuilder/ 
I added/verified it : https://grodansparadis.com/wordpress/?p=4135 

Verified the setup again with : 
https://wiki.debian.org/PbuilderTricks


If you show my the error your getting when you want to build it, i might be able
to help out.
And tell a bit more on the setup, i'll help in getting this running again
for you guys.


So far, 

Greetz, 

Louis


> -----Oorspronkelijk bericht-----
> Van: Denis CARDON [mailto:dcardon at tranquil.it] 
> Verzonden: vrijdag 20 maart 2020 21:32
> Aan: L.P.H. van Belle; samba at lists.samba.org
> Onderwerp: Re: [Samba] Debian Buster Samba 4.12 (experimental 
> packages) amd64/i386
> 
> Hi Louis,
> 
> For the earlier issue on deb 4.7.6 packages I have not been able to 
> understand what we did wrong, we recompiled with the same clean setup 
> and where not able to reproduce the issue... I've tried to look for 
> different dependencies updates and couldn't find any differences.
I'm
> puzzled.
> 
> Anyway I've compiled Samba 4.11.7 and Samba 4.12.0 for CentOS7 and 
> CentOS8 packages:
> 
> https://samba.tranquil.it/centos7/samba-4.11.7/
> https://samba.tranquil.it/centos7/samba-4.12.0/
> https://samba.tranquil.it/centos8/samba-4.11.7/
> https://samba.tranquil.it/centos8/samba-4.12.0/
> 
> Packages for Centos8 and Samba 4.12.0 are still experimental 
> as not yet 
> tested in production, but I hope to be able to go forward on 
> that soon 
> as CentOS8 is now getting more traction.
> 
> The rpm are backported from Fedora 32 packages using the 
> great work from 
> Gunter et al. by switching from MIT kerberos to Heimdal and 
> fixing a few 
> dependencies versions. Centos7 need porting of newer gnutls 
> (thanks to 
> Niko Kadel Garcia) and Centos8 need a few extra packages that are not 
> yet packaged in EPEL.
> 
> You might take a look at rst/sphinx for documenting the 
> installation of 
> your packages, it makes nice docs! You may take a look at our doc for 
> inspiration (note: there may be still a few pieces of French here and 
> there, translation is going on :-) but it should be mostly 
> understandable) : 
> https://dev.tranquil.it/samba/en/samba_config_server/centos7/s
> erver_install_samba_centos.html
> 
> Cheers,
> 
> Denis
> 
> 
> 
> Le 20/03/2020 ? 15:12, L.P.H. van Belle via samba a ?crit?:
> > Hai Guys,
> >   
> > I've uploaded the Debian Buster samba 4.12 packages to the 
> buster-experimental repo.
> > These need some extra love in tests, so if your able to 
> please these a bit.
> > And report back to me/the samba list.
> > 
> > ONLY amd64 and i386 Packages. (sorry armhf is still building)
> >   
> > Repo setup.
> > wget -O - 
> http://apt.van-belle.nl/louis-van-belle.gpg-key.asc | apt-key add -
> > echo "deb http://apt.van-belle.nl/debian 
> buster-experimental main contrib non-free" | sudo tee -a 
> /etc/apt/sources.list.d/van-belle.list
> > 
> > # all sources are all available through
> > echo "deb-src http://apt.van-belle.nl/debian 
> buster-experimental main contrib non-free" | sudo tee -a 
> /etc/apt/sources.list.d/van-belle.list
> > 
> > If you want to look at the buildlogs: 
> https://downloads.van-belle.nl/samba4/Buildlogs/buster/
> > 
> > Please beware, after testing remove the buster-experimental 
> or disable it.
> > These repo's with xxxxx-experimental might cointain failing 
> packages ..
> > I DON'T recommend these to use on production servers yet.
> > 
> > So far these all look good. Install as you would do normally.
> > 
> > Have good weekend..
> > 
> > Greetz,
> > 
> > Louis
> > 
> > 
> > 
> 
>