I noticed something different on the page you linked. It must be
outdated or maybe it is setup for a different version of Debian. The
system runs Debian Wheezy AMD64. The paths referenced do not exist. I
also checked several other Debian systems and NONE have the
"x86_64-linux-gnu" directories.
root at dc01:~# uname -r
2.6.32-5-amd64
root at dc01:~# l /lib | grep x86
lrwxrwxrwx 1 root root 12 Dec 27 2012 ld-linux-x86-64.so.2 ->
ld-2.11.3.so
root at dc01:~# l /usr/lib | grep x86
root at dc01:~#
Is this the problem? What version of Debian is the guide for? I believe
Debian 8 was released recently but cannot be sure since it is a systemd
distro I now use Gentoo. If the guide is for 8, maybe we need one for 7
since it is supported until the release of 9.
On 06/05/2015 02:44 AM, L.P.H. van Belle wrote:>> What about getent and id not working on the DC? I cannot find any
>> information relevant to my situation with them online.
> ok, try the following.
>
> chown -R root:root /samba/var/locks/sysvol
> chmod -R 755 /samba/var/locks/sysvol
>
> kinit Administrator
> samba-tool ntacl sysvolreset
> kdestroy
>
> the id/getent issue..
> install libnss-winbind
>
> and check your server again with.
> read :
> https://wiki.samba.org/index.php/Setup_a_Samba_AD_Member_Server
> from : Make domain users/groups available locally through Winbind
>
>
> Greetz,
>
> Louis
>
>
>> -----Oorspronkelijk bericht-----
>> Van: ryana at reachtechfp.com
>> [mailto:samba-bounces at lists.samba.org] Namens Ryan Ashley
>> Verzonden: donderdag 4 juni 2015 18:42
>> Aan: samba at lists.samba.org
>> Onderwerp: Re: [Samba] Clients unable to get group policy...
>>
>> I tried resetting dozens of times, neither works. I do remember a
>> permissions issue from ages back, where the Unix permissions had to be
>> 777 on a share and then the ACL stuff worked. Do I need to set the
>> sysvol to 777?
>>
>> What about getent and id not working on the DC? I cannot find any
>> information relevant to my situation with them online.
>>
>> On 06/04/2015 08:46 AM, James wrote:
>>> On 6/3/2015 11:43 AM, Ryan Ashley wrote:
>>>> James, I cloned it using git. I installed it to a private
partition
>>>> (/samba) back when I was first testing Samba4. It is in the
path and
>>>> this worked for ages, but recently just stopped. No errors,
>> no warnings,
>>>> nothing. Just dead.
>>>>
>>>> The GP in question is the default domain policy. I already
tried
>>>> unlinking it and it fails on the next one. I only have two
>> GPOs, so it
>>>> cannot "read" either one. I also noted that, during
one of my angry
>>>> moments, I just kept spamming "gpupdate" in a DOS box
on
>> the workstation
>>>> and suddenly it worked once, then went back to erroring
>> out. Spamming it
>>>> has not fixed it since. I even wrote a small batch script
>> which looped
>>>> until gpupdate returned success. It went into an endless loop
which
>>>> lasted about 20hrs before I stopped it.
>>>>
>>>> As for the sysvol location, it is in
>> "/samba/var/locks/sysvol", which
>>>> worked for a few years, and has just stopped. Permissions
>> appear to be
>>>> correct.
>>>>
>>>> On 05/29/2015 11:24 AM, James wrote:
>>>>> On 5/29/2015 10:40 AM, Ryan Ashley wrote:
>>>>>> Thank you, Louis. This has not corrected the getent and
>> id issue, however.
>>>>>> On 05/29/2015 10:13 AM, L.P.H. van Belle wrote:
>>>>>>
>>>>> Ryan,
>>>>>
>>>>> Is it a specific GP that can't be read? Can you
remove
>> all links to
>>>>> one workstation and leave just the default domain GP and
>> test? Did you
>>>>> install samba from tar and provide the location for sysvol
>> in the build?
>>> Ryan,
>>>
>>> It definitely sounds like a permission problem. I can
>> only think of
>>> one other thing. Try
>>>
>>> samba-tool ntacl sysvolreset --use-ntvfs
>>>
>>> See if gpupdate works. If it works try
>>>
>>> samba-tool ntacl sysvolreset --use-s3fs
>>>
>>> Are you using a central store for group policy? I'm not sure
>> what else
>>> to try.
>>>
>> --
>> Lead IT/IS Specialist
>> Reach Technology FP, Inc
>>
>> --
>> To unsubscribe from this list go to the following URL and read the
>> instructions: https://lists.samba.org/mailman/options/samba
>>
>>
--
Lead IT/IS Specialist
Reach Technology FP, Inc