Jason Long
2014-Dec-28 08:47 UTC
[Samba] Use Samba with ACL for read Active Directory and set Permissions via it.
I never used four different Workgroup or Domain. My domain is
"jasondomain" and as you see my last "smb.conf" it is. I
change "MYGROUP" to "jasondomain" but problem not solved.
On Saturday, December 27, 2014 7:02 AM, Rowland Penny <rowlandpenny at
googlemail.com> wrote:
On 27/12/14 14:18, Jason Long wrote:> Thank you so much.
> I changed my "smb.conf" and "password-auth-ac". I
attached two file
> for you and you can see them. My problem not solved :( and login
> windows showed and not accept my username and password, I attached it too.
>? I paste my "fstab" file here and as you see the "acl"
is enabled for
> "root" :
>
> #
> # /etc/fstab
> # Created by anaconda on Wed Dec 24 10:02:57 2014
> #
> # Accessible filesystems, by reference, are maintained under
'/dev/disk'
> # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more
> info
> #
> /dev/mapper/vg_print-lv_root / ext4? ? acl,defaults? ? ? ? 1 1
> UUID=9ad25e0f-4f1a-4c6a-a419-98a016fcc30d /boot? ? ? ? ? ? ext4?
>? defaults? ? ? ? 1 2
> /dev/mapper/vg_print-lv_swap swap? swap? ? defaults? ? ? ? 0 0
> tmpfs? ? ? ? ? ? ? ? ? /dev/shm? ? ? ? ? ? ? ? tmpfs? defaults? ? ?
>? 0 0
> devpts? ? ? ? ? ? ? ? ? /dev/pts? devpts? gid=5,mode=620? 0 0
> sysfs? ? ? ? ? ? ? ? ? /sys? ? ? ? ? ? ? ? ? ? sysfs? defaults? ? ?
>? 0 0
> proc? ? ? ? ? ? ? ? ? ? /proc? ? ? ? ? ? ? ? ? proc? ? defaults? ? ?
>? 0 0
>
> I paste "getfacl" for test directory here :
>
> getfacl test/
> # file: test/
> # owner: jasondomain\134jason
> # group: jasondomain\134grp-jason-rw
> user::rwx
> group::r-x
> group:jasondomain\134grp-jason-rw:rwx
> mask::rwx
> other::r-x
>
> After change "password-auth-ac", When I want to restart
"winbind"
> server it show me an error as below :
>
> #service smb restart
> Shutting down SMB services:? ? ? ? ? ? ? ? ? ? [? OK? ]
> Starting SMB services:? ? ? ? ? ? ? ? ? ? ? ? ? [? OK? ]
> # service winbind restart
> Shutting down Winbind services:? ? ? ? ? ? ? [FAILED]
> Starting Winbind services:? ? ? ? ? ? ? ? ? ? [? OK? ]
>
>
> In your opinion what is the problem?
>
>
>
> On Saturday, December 27, 2014 4:12 AM, Rowland Penny
> <rowlandpenny at googlemail.com> wrote:
>
>
> On 27/12/14 11:55, Jason Long wrote:
>> You right. I joined my Linux box into Windows domain.
>> Of course. I attached my "smb.conf". Can you see it?
>>
>>
>> On Saturday, December 27, 2014 3:36 AM, Rowland Penny
>> <rowlandpenny at googlemail.com> <mailto:rowlandpenny at
googlemail.com> wrote:
>>
>>
>> On 27/12/14 06:44, Jason Long wrote:
>>
>> > Thank you so much.
>> > No, I'm not. I joined my linux to Windows domain because of
AD. I
>> can define some users in my Linux and Windows clients use it to open
>> share and ... but my problem is that I have a lot of users and groups
>> and Redefine all of them in Linux is a little silly :(. I joined my
>> Linux to Windows domain because of use AD users and groups.
>> >
>> > About your question :
>> > "Where did you setup the password for
'jasondomain\jason'? Again,
>> if you
>> > didn't set a password, more modern versions of windows
won't allow
>> you to
>> > login (or attach a share) remotely."
>> >
>> > I must say that "jason" is defined in AD on Windows OS
and I use it
>> for login into Linux.
>> >
>> >
>> > "You don't say what happens when you try to open
'test'.? You say
>> it can't let you?? What error message does it give you? "
>> > It don't show me any error and just show Login Windows again
:(.
>> >
>> >
>> >
>> >
>> > On Friday, December 26, 2014 2:35 PM, Linda W <samba at
tlinx.org
>> <mailto:samba at tlinx.org>> wrote:
>> > Jason Long wrote:
>> >> Hello Folks.
>> >> How are you?
>> >>
>> >> I joined my CentOS into Windows Domain and I want to give
>> Permission to files and Directory via Active Directory. When I use
>> "getent passwd" and "getent group", I can see All
AD users and
>> Groups. I use below command to give Permission to a Folder via ACL :
>> >>
>> >> setfacl -m g:"jasondomain\jason-rw":rwx
>> /home/local/jasondomain/jason/test
>> >>
>> >> and I create a part for my "smb.conf" file :
>> >>
>> >> [Test]
>> >> comment = test
>> >> path = /home/local/jasondomain/jason/test
>> >> browsable = yes
>> >> inherit acls = yes
>> >> inherit permissions = yes
>> >> inherit owner = yes
>> >> map acl inherit = yes
>> >> acl check permissions = yes
>> >> nt acl support = yes
>> >> #valid users = %D\%S
>> >> #write list = @jasondomain\domain^admins
>> >> read only = no
>> >>
>> >>
>> >> but when I browse the "Test" directory it ask me
username and
>> password and when I enter "jasondomain\jason" as username it
can't
>> let me to open the "Test" directory. What is the problem?
>> >>
>> > ----
>> >? ? ? Are you already logged into the server under different
>> credentials,
>> > like 'WORKGROUP', jason (i.e. do you already have some
shares mounted?)
>> >
>> > If I remember, Windows won't allow the same workstation to
connect
>> under
>> > two different user id's.? If you already have something
mounted
>> from your
>> > workstation with different credentials, you need to close (unmount
>> / unmap)
>> > those other connections.
>> >
>> > Where did you setup the password for 'jasondomain\jason'?
Again, if you
>> > didn't set a password, more modern versions of windows
won't allow
>> you to
>> > login (or attach a share) remotely.
>> >
>> > You don't say what happens when you try to open
'test'.? You say it
>> >
>> > can't let
>> > you?? What error message does it give you?
>>
>>
>> OK, If I understand you correctly, you have setup samba on a Centos
>> machine and joined it to a windows machine, is this correct ?
>>
>> Could you post the entire smb.conf from your Centos machine.
>>
>> Rowland
>>
>> --
>> To unsubscribe from this list go to the following URL and read the
>> instructions: https://lists.samba.org/mailman/options/samba
>>
>>
>>
> OK, after wading through all the un-needed lines, I got this:
>
> [global]
>? ? workgroup = MYGROUP
>? ? server string = Samba Server Version %v
>? ? # logs split per machine
>? ? log file = /var/log/samba/log.%m
>? ? # max 50KB per log file, then rotate
>? ? max log size = 50
>? ? security = user
>? ? passdb backend = tdbsam
>? ? load printers = yes
>? ? cups options = raw
>
> [homes]
>? ? comment = Home Directories
>? ? browseable = no
>? ? writable = yes
>
> [printers]
>? ? comment = All Printers
>? ? path = /var/spool/samba
>? ? browseable = no
>? ? guest ok = no
>? ? writable = no
>? ? printable = yes
>
> [Test]
> comment = Public Stuff
> path = /home/local/HAMSHAHRY/jokar/test/
> browsable = yes
> inherit acls = yes
> inherit permissions = yes
> inherit owner = yes
> map acl inherit = yes
> acl check permissions = yes
> nt acl support = yes
> read only = no
>
> Try changing 'security = user' to 'security = ads' and
adding the
> required winbind & idmap lines, see:
> https://wiki.samba.org/index.php/Setup_a_Samba_AD_Member_Server
>
> Yes, I know it says 'member server', but you can use it for a
client
> as well.
>
> Rowland
>
>
>
Hi, you seem to be using **four**, yes four different workgroup (also
known as domain) names:
In smb.conf: MYGROUP & SAMDOM
When trying to login: jasondomain & WORKGROUP
They all need to be the same, you also need to add uidNumber's to your
users and a gidNumber to at least 'Domain Users'
Rowland
--
To unsubscribe from this list go to the following URL and read the
instructions:? https://lists.samba.org/mailman/options/samba
Rowland Penny
2014-Dec-28 09:40 UTC
[Samba] Use Samba with ACL for read Active Directory and set Permissions via it.
On 28/12/14 08:47, Jason Long wrote:> I never used four different Workgroup or Domain. My domain is > "jasondomain" and as you see my last "smb.conf" it is. I change > "MYGROUP" to "jasondomain" but problem not solved. > > > On Saturday, December 27, 2014 7:02 AM, Rowland Penny > <rowlandpenny at googlemail.com> wrote: > > > On 27/12/14 14:18, Jason Long wrote: > > Thank you so much. > > I changed my "smb.conf" and "password-auth-ac". I attached two file > > for you and you can see them. My problem not solved :( and login > > windows showed and not accept my username and password, I attached > it too. > > I paste my "fstab" file here and as you see the "acl" is enabled for > > "root" : > > > > # > > # /etc/fstab > > # Created by anaconda on Wed Dec 24 10:02:57 2014 > > # > > # Accessible filesystems, by reference, are maintained under '/dev/disk' > > # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more > > info > > # > > /dev/mapper/vg_print-lv_root / ext4 acl,defaults 1 1 > > UUID=9ad25e0f-4f1a-4c6a-a419-98a016fcc30d /boot ext4 > > defaults 1 2 > > /dev/mapper/vg_print-lv_swap swap swap defaults 0 0 > > tmpfs /dev/shm tmpfs defaults > > 0 0 > > devpts /dev/pts devpts gid=5,mode=620 0 0 > > sysfs /sys sysfs defaults > > 0 0 > > proc /proc proc defaults > > 0 0 > > > > I paste "getfacl" for test directory here : > > > > getfacl test/ > > # file: test/ > > # owner: jasondomain\134jason > > # group: jasondomain\134grp-jason-rw > > user::rwx > > group::r-x > > group:jasondomain\134grp-jason-rw:rwx > > mask::rwx > > other::r-x > > > > After change "password-auth-ac", When I want to restart "winbind" > > server it show me an error as below : > > > > #service smb restart > > Shutting down SMB services: [ OK ] > > Starting SMB services: [ OK ] > > # service winbind restart > > Shutting down Winbind services: [FAILED] > > Starting Winbind services: [ OK ] > > > > > > In your opinion what is the problem? > > > > > > > > On Saturday, December 27, 2014 4:12 AM, Rowland Penny > > <rowlandpenny at googlemail.com <mailto:rowlandpenny at googlemail.com>> > wrote: > > > > > > On 27/12/14 11:55, Jason Long wrote: > >> You right. I joined my Linux box into Windows domain. > >> Of course. I attached my "smb.conf". Can you see it? > >> > >> > >> On Saturday, December 27, 2014 3:36 AM, Rowland Penny > >> <rowlandpenny at googlemail.com <mailto:rowlandpenny at googlemail.com>> > <mailto:rowlandpenny at googlemail.com > <mailto:rowlandpenny at googlemail.com>> wrote: > >> > >> > >> On 27/12/14 06:44, Jason Long wrote: > >> > >> > Thank you so much. > >> > No, I'm not. I joined my linux to Windows domain because of AD. I > >> can define some users in my Linux and Windows clients use it to open > >> share and ... but my problem is that I have a lot of users and groups > >> and Redefine all of them in Linux is a little silly :(. I joined my > >> Linux to Windows domain because of use AD users and groups. > >> > > >> > About your question : > >> > "Where did you setup the password for 'jasondomain\jason'? Again, > >> if you > >> > didn't set a password, more modern versions of windows won't allow > >> you to > >> > login (or attach a share) remotely." > >> > > >> > I must say that "jason" is defined in AD on Windows OS and I use it > >> for login into Linux. > >> > > >> > > >> > "You don't say what happens when you try to open 'test'. You say > >> it can't let you? What error message does it give you? " > >> > It don't show me any error and just show Login Windows again :(. > >> > > >> > > >> > > >> > > >> > On Friday, December 26, 2014 2:35 PM, Linda W <samba at tlinx.org > <mailto:samba at tlinx.org> > >> <mailto:samba at tlinx.org <mailto:samba at tlinx.org>>> wrote: > >> > Jason Long wrote: > >> >> Hello Folks. > >> >> How are you? > >> >> > >> >> I joined my CentOS into Windows Domain and I want to give > >> Permission to files and Directory via Active Directory. When I use > >> "getent passwd" and "getent group", I can see All AD users and > >> Groups. I use below command to give Permission to a Folder via ACL : > >> >> > >> >> setfacl -m g:"jasondomain\jason-rw":rwx > >> /home/local/jasondomain/jason/test > >> >> > >> >> and I create a part for my "smb.conf" file : > >> >> > >> >> [Test] > >> >> comment = test > >> >> path = /home/local/jasondomain/jason/test > >> >> browsable = yes > >> >> inherit acls = yes > >> >> inherit permissions = yes > >> >> inherit owner = yes > >> >> map acl inherit = yes > >> >> acl check permissions = yes > >> >> nt acl support = yes > >> >> #valid users = %D\%S > >> >> #write list = @jasondomain\domain^admins > >> >> read only = no > >> >> > >> >> > >> >> but when I browse the "Test" directory it ask me username and > >> password and when I enter "jasondomain\jason" as username it can't > >> let me to open the "Test" directory. What is the problem? > >> >> > >> > ---- > >> > Are you already logged into the server under different > >> credentials, > >> > like 'WORKGROUP', jason (i.e. do you already have some shares > mounted?) > >> > > >> > If I remember, Windows won't allow the same workstation to connect > >> under > >> > two different user id's. If you already have something mounted > >> from your > >> > workstation with different credentials, you need to close (unmount > >> / unmap) > >> > those other connections. > >> > > >> > Where did you setup the password for 'jasondomain\jason'? Again, > if you > >> > didn't set a password, more modern versions of windows won't allow > >> you to > >> > login (or attach a share) remotely. > >> > > >> > You don't say what happens when you try to open 'test'. You say it > >> > > >> > can't let > >> > you? What error message does it give you? > >> > >> > >> OK, If I understand you correctly, you have setup samba on a Centos > >> machine and joined it to a windows machine, is this correct ? > >> > >> Could you post the entire smb.conf from your Centos machine. > >> > >> Rowland > >> > >> -- > >> To unsubscribe from this list go to the following URL and read the > >> instructions: https://lists.samba.org/mailman/options/samba > >> > >> > >> > > OK, after wading through all the un-needed lines, I got this: > > > > [global] > > workgroup = MYGROUP > > server string = Samba Server Version %v > > # logs split per machine > > log file = /var/log/samba/log.%m > > # max 50KB per log file, then rotate > > max log size = 50 > > security = user > > passdb backend = tdbsam > > load printers = yes > > cups options = raw > > > > [homes] > > comment = Home Directories > > browseable = no > > writable = yes > > > > [printers] > > comment = All Printers > > path = /var/spool/samba > > browseable = no > > guest ok = no > > writable = no > > printable = yes > > > > [Test] > > comment = Public Stuff > > path = /home/local/HAMSHAHRY/jokar/test/ > > browsable = yes > > inherit acls = yes > > inherit permissions = yes > > inherit owner = yes > > map acl inherit = yes > > acl check permissions = yes > > nt acl support = yes > > read only = no > > > > Try changing 'security = user' to 'security = ads' and adding the > > required winbind & idmap lines, see: > > https://wiki.samba.org/index.php/Setup_a_Samba_AD_Member_Server > > > > Yes, I know it says 'member server', but you can use it for a client > > as well. > > > > Rowland > > > > > > > > Hi, you seem to be using **four**, yes four different workgroup (also > known as domain) names: > In smb.conf: MYGROUP & SAMDOM > When trying to login: jasondomain & WORKGROUP > > They all need to be the same, you also need to add uidNumber's to your > users and a gidNumber to at least 'Domain Users' > > > Rowland > > > > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/options/samba > >OK, in the last smb.conf you posted there are these lines: workgroup = MYGROUP idmap config SAMDOM:backend = ad idmap config SAMDOM:schema_mode = rfc2307 idmap config SAMDOM:range = 500-40000 Also in samba-1.png: Username: jasondomain\jason domain: WORKGROUP I make that 4 workgroup names, ok you have changed MYGROUP, but what about SAMDOM ? You also have 'winbind use default domain = yes' , because of this, you do not need to use 'jasondomain\jason', just 'jason' should work. Do you by any chance have a Unix user called 'jason' on the samba machine ? Also, when you try to login as 'jasondomain\jason' are you doing this on the samba machine ? Rowland
Jason Long
2014-Dec-28 11:51 UTC
[Samba] Use Samba with ACL for read Active Directory and set Permissions via it.
Thank you so much. I changed "SAMDOM" to "jasondomain" and also "winbind use default domain = no" but problem exist. int he photo that I sent, I changed "WORKGROUP" to "jasondomain" too. I have a question, My domain have a prefix with ".jj" and it is "jasondomain.jj". I changed : [global] workgroup = JASONDOMAIN.JJ server string = Samba Server Version %v # logs split per machine log file = /var/log/samba/log.%m # max 50KB per log file, then rotate max log size = 50 security = ads passdb backend = tdbsam load printers = yes cups options = raw idmap config *:backend = tdb idmap config *:range = 70001-80000 #idmap config SAMDOM:backend = ad idmap config JASONDOMAIN.JJ:backend = ad idmap config JASONDOMAIN.JJ:schema_mode = rfc2307 idmap config JASONDOMAIN.JJ:range = 500-40000 Am I right? If yes, My problem not solved :( On Sunday, December 28, 2014 1:41 AM, Rowland Penny <rowlandpenny at googlemail.com> wrote: On 28/12/14 08:47, Jason Long wrote:> I never used four different Workgroup or Domain. My domain is > "jasondomain" and as you see my last "smb.conf" it is. I change > "MYGROUP" to "jasondomain" but problem not solved. > > > On Saturday, December 27, 2014 7:02 AM, Rowland Penny > <rowlandpenny at googlemail.com> wrote: > > > On 27/12/14 14:18, Jason Long wrote: > > Thank you so much. > > I changed my "smb.conf" and "password-auth-ac". I attached two file > > for you and you can see them. My problem not solved :( and login > > windows showed and not accept my username and password, I attached > it too. > > I paste my "fstab" file here and as you see the "acl" is enabled for > > "root" : > > > > # > > # /etc/fstab > > # Created by anaconda on Wed Dec 24 10:02:57 2014 > > # > > # Accessible filesystems, by reference, are maintained under '/dev/disk' > > # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more > > info > > # > > /dev/mapper/vg_print-lv_root / ext4 acl,defaults 1 1 > > UUID=9ad25e0f-4f1a-4c6a-a419-98a016fcc30d /boot ext4 > > defaults 1 2 > > /dev/mapper/vg_print-lv_swap swap swap defaults 0 0 > > tmpfs /dev/shm tmpfs defaults > > 0 0 > > devpts /dev/pts devpts gid=5,mode=620 0 0 > > sysfs /sys sysfs defaults > > 0 0 > > proc /proc proc defaults > > 0 0 > > > > I paste "getfacl" for test directory here : > > > > getfacl test/ > > # file: test/ > > # owner: jasondomain\134jason > > # group: jasondomain\134grp-jason-rw > > user::rwx > > group::r-x > > group:jasondomain\134grp-jason-rw:rwx > > mask::rwx > > other::r-x > > > > After change "password-auth-ac", When I want to restart "winbind" > > server it show me an error as below : > > > > #service smb restart > > Shutting down SMB services: [ OK ] > > Starting SMB services: [ OK ] > > # service winbind restart > > Shutting down Winbind services: [FAILED] > > Starting Winbind services: [ OK ] > > > > > > In your opinion what is the problem? > > > > > > > > On Saturday, December 27, 2014 4:12 AM, Rowland Penny > > <rowlandpenny at googlemail.com <mailto:rowlandpenny at googlemail.com>> > wrote: > > > > > > On 27/12/14 11:55, Jason Long wrote: > >> You right. I joined my Linux box into Windows domain. > >> Of course. I attached my "smb.conf". Can you see it? > >> > >> > >> On Saturday, December 27, 2014 3:36 AM, Rowland Penny > >> <rowlandpenny at googlemail.com <mailto:rowlandpenny at googlemail.com>> > <mailto:rowlandpenny at googlemail.com > <mailto:rowlandpenny at googlemail.com>> wrote: > >> > >> > >> On 27/12/14 06:44, Jason Long wrote: > >> > >> > Thank you so much. > >> > No, I'm not. I joined my linux to Windows domain because of AD. I > >> can define some users in my Linux and Windows clients use it to open > >> share and ... but my problem is that I have a lot of users and groups > >> and Redefine all of them in Linux is a little silly :(. I joined my > >> Linux to Windows domain because of use AD users and groups. > >> > > >> > About your question : > >> > "Where did you setup the password for 'jasondomain\jason'? Again, > >> if you > >> > didn't set a password, more modern versions of windows won't allow > >> you to > >> > login (or attach a share) remotely." > >> > > >> > I must say that "jason" is defined in AD on Windows OS and I use it > >> for login into Linux. > >> > > >> > > >> > "You don't say what happens when you try to open 'test'. You say > >> it can't let you? What error message does it give you? " > >> > It don't show me any error and just show Login Windows again :(. > >> > > >> > > >> > > >> > > >> > On Friday, December 26, 2014 2:35 PM, Linda W <samba at tlinx.org > <mailto:samba at tlinx.org> > >> <mailto:samba at tlinx.org <mailto:samba at tlinx.org>>> wrote: > >> > Jason Long wrote: > >> >> Hello Folks. > >> >> How are you? > >> >> > >> >> I joined my CentOS into Windows Domain and I want to give > >> Permission to files and Directory via Active Directory. When I use > >> "getent passwd" and "getent group", I can see All AD users and > >> Groups. I use below command to give Permission to a Folder via ACL : > >> >> > >> >> setfacl -m g:"jasondomain\jason-rw":rwx > >> /home/local/jasondomain/jason/test > >> >> > >> >> and I create a part for my "smb.conf" file : > >> >> > >> >> [Test] > >> >> comment = test > >> >> path = /home/local/jasondomain/jason/test > >> >> browsable = yes > >> >> inherit acls = yes > >> >> inherit permissions = yes > >> >> inherit owner = yes > >> >> map acl inherit = yes > >> >> acl check permissions = yes > >> >> nt acl support = yes > >> >> #valid users = %D\%S > >> >> #write list = @jasondomain\domain^admins > >> >> read only = no > >> >> > >> >> > >> >> but when I browse the "Test" directory it ask me username and > >> password and when I enter "jasondomain\jason" as username it can't > >> let me to open the "Test" directory. What is the problem? > >> >> > >> > ---- > >> > Are you already logged into the server under different > >> credentials, > >> > like 'WORKGROUP', jason (i.e. do you already have some shares > mounted?) > >> > > >> > If I remember, Windows won't allow the same workstation to connect > >> under > >> > two different user id's. If you already have something mounted > >> from your > >> > workstation with different credentials, you need to close (unmount > >> / unmap) > >> > those other connections. > >> > > >> > Where did you setup the password for 'jasondomain\jason'? Again, > if you > >> > didn't set a password, more modern versions of windows won't allow > >> you to > >> > login (or attach a share) remotely. > >> > > >> > You don't say what happens when you try to open 'test'. You say it > >> > > >> > can't let > >> > you? What error message does it give you? > >> > >> > >> OK, If I understand you correctly, you have setup samba on a Centos > >> machine and joined it to a windows machine, is this correct ? > >> > >> Could you post the entire smb.conf from your Centos machine. > >> > >> Rowland > >> > >> -- > >> To unsubscribe from this list go to the following URL and read the > >> instructions: https://lists.samba.org/mailman/options/samba > >> > >> > >> > > OK, after wading through all the un-needed lines, I got this: > > > > [global] > > workgroup = MYGROUP > > server string = Samba Server Version %v > > # logs split per machine > > log file = /var/log/samba/log.%m > > # max 50KB per log file, then rotate > > max log size = 50 > > security = user > > passdb backend = tdbsam > > load printers = yes > > cups options = raw > > > > [homes] > > comment = Home Directories > > browseable = no > > writable = yes > > > > [printers] > > comment = All Printers > > path = /var/spool/samba > > browseable = no > > guest ok = no > > writable = no > > printable = yes > > > > [Test] > > comment = Public Stuff > > path = /home/local/HAMSHAHRY/jokar/test/ > > browsable = yes > > inherit acls = yes > > inherit permissions = yes > > inherit owner = yes > > map acl inherit = yes > > acl check permissions = yes > > nt acl support = yes > > read only = no > > > > Try changing 'security = user' to 'security = ads' and adding the > > required winbind & idmap lines, see: > > https://wiki.samba.org/index.php/Setup_a_Samba_AD_Member_Server > > > > Yes, I know it says 'member server', but you can use it for a client > > as well. > > > > Rowland > > > > > > > > Hi, you seem to be using **four**, yes four different workgroup (also > known as domain) names: > In smb.conf: MYGROUP & SAMDOM > When trying to login: jasondomain & WORKGROUP > > They all need to be the same, you also need to add uidNumber's to your > users and a gidNumber to at least 'Domain Users' > > > Rowland > > > > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/options/samba > >OK, in the last smb.conf you posted there are these lines: workgroup = MYGROUP idmap config SAMDOM:backend = ad idmap config SAMDOM:schema_mode = rfc2307 idmap config SAMDOM:range = 500-40000 Also in samba-1.png: Username: jasondomain\jason domain: WORKGROUP I make that 4 workgroup names, ok you have changed MYGROUP, but what about SAMDOM ? You also have 'winbind use default domain = yes' , because of this, you do not need to use 'jasondomain\jason', just 'jason' should work. Do you by any chance have a Unix user called 'jason' on the samba machine ? Also, when you try to login as 'jasondomain\jason' are you doing this on the samba machine ? Rowland -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
Jason Long
2014-Dec-28 11:54 UTC
[Samba] Use Samba with ACL for read Active Directory and set Permissions via it.
Thank you so much. I changed "SAMDOM" to "jasondomain" and also "winbind use default domain = no" but problem exist. int he photo that I sent, I changed "WORKGROUP" to "jasondomain" too. I have a question, My domain have a prefix with ".jj" and it is "jasondomain.jj". I changed : [global] workgroup = JASONDOMAIN.JJ server string = Samba Server Version %v # logs split per machine log file = /var/log/samba/log.%m # max 50KB per log file, then rotate max log size = 50 security = ads passdb backend = tdbsam load printers = yes cups options = raw idmap config *:backend = tdb idmap config *:range = 70001-80000 #idmap config SAMDOM:backend = ad idmap config JASONDOMAIN.JJ:backend = ad idmap config JASONDOMAIN.JJ:schema_mode = rfc2307 idmap config JASONDOMAIN.JJ:range = 500-40000 Am I right? If yes, My problem not solved :( about your question I must say that "No", I have not any "jason" user in Linux machine. Yes, I use "jasondomain\jason" for login into Linux machine and "jason" is a user that defined in Windows Active Directory. Thanks. On Sunday, December 28, 2014 1:41 AM, Rowland Penny <rowlandpenny at googlemail.com> wrote: On 28/12/14 08:47, Jason Long wrote:> I never used four different Workgroup or Domain. My domain is > "jasondomain" and as you see my last "smb.conf" it is. I change > "MYGROUP" to "jasondomain" but problem not solved. > > > On Saturday, December 27, 2014 7:02 AM, Rowland Penny > <rowlandpenny at googlemail.com> wrote: > > > On 27/12/14 14:18, Jason Long wrote: > > Thank you so much. > > I changed my "smb.conf" and "password-auth-ac". I attached two file > > for you and you can see them. My problem not solved :( and login > > windows showed and not accept my username and password, I attached > it too. > > I paste my "fstab" file here and as you see the "acl" is enabled for > > "root" : > > > > # > > # /etc/fstab > > # Created by anaconda on Wed Dec 24 10:02:57 2014 > > # > > # Accessible filesystems, by reference, are maintained under '/dev/disk' > > # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more > > info > > # > > /dev/mapper/vg_print-lv_root / ext4 acl,defaults 1 1 > > UUID=9ad25e0f-4f1a-4c6a-a419-98a016fcc30d /boot ext4 > > defaults 1 2 > > /dev/mapper/vg_print-lv_swap swap swap defaults 0 0 > > tmpfs /dev/shm tmpfs defaults > > 0 0 > > devpts /dev/pts devpts gid=5,mode=620 0 0 > > sysfs /sys sysfs defaults > > 0 0 > > proc /proc proc defaults > > 0 0 > > > > I paste "getfacl" for test directory here : > > > > getfacl test/ > > # file: test/ > > # owner: jasondomain\134jason > > # group: jasondomain\134grp-jason-rw > > user::rwx > > group::r-x > > group:jasondomain\134grp-jason-rw:rwx > > mask::rwx > > other::r-x > > > > After change "password-auth-ac", When I want to restart "winbind" > > server it show me an error as below : > > > > #service smb restart > > Shutting down SMB services: [ OK ] > > Starting SMB services: [ OK ] > > # service winbind restart > > Shutting down Winbind services: [FAILED] > > Starting Winbind services: [ OK ] > > > > > > In your opinion what is the problem? > > > > > > > > On Saturday, December 27, 2014 4:12 AM, Rowland Penny > > <rowlandpenny at googlemail.com <mailto:rowlandpenny at googlemail.com>> > wrote: > > > > > > On 27/12/14 11:55, Jason Long wrote: > >> You right. I joined my Linux box into Windows domain. > >> Of course. I attached my "smb.conf". Can you see it? > >> > >> > >> On Saturday, December 27, 2014 3:36 AM, Rowland Penny > >> <rowlandpenny at googlemail.com <mailto:rowlandpenny at googlemail.com>> > <mailto:rowlandpenny at googlemail.com > <mailto:rowlandpenny at googlemail.com>> wrote: > >> > >> > >> On 27/12/14 06:44, Jason Long wrote: > >> > >> > Thank you so much. > >> > No, I'm not. I joined my linux to Windows domain because of AD. I > >> can define some users in my Linux and Windows clients use it to open > >> share and ... but my problem is that I have a lot of users and groups > >> and Redefine all of them in Linux is a little silly :(. I joined my > >> Linux to Windows domain because of use AD users and groups. > >> > > >> > About your question : > >> > "Where did you setup the password for 'jasondomain\jason'? Again, > >> if you > >> > didn't set a password, more modern versions of windows won't allow > >> you to > >> > login (or attach a share) remotely." > >> > > >> > I must say that "jason" is defined in AD on Windows OS and I use it > >> for login into Linux. > >> > > >> > > >> > "You don't say what happens when you try to open 'test'. You say > >> it can't let you? What error message does it give you? " > >> > It don't show me any error and just show Login Windows again :(. > >> > > >> > > >> > > >> > > >> > On Friday, December 26, 2014 2:35 PM, Linda W <samba at tlinx.org > <mailto:samba at tlinx.org> > >> <mailto:samba at tlinx.org <mailto:samba at tlinx.org>>> wrote: > >> > Jason Long wrote: > >> >> Hello Folks. > >> >> How are you? > >> >> > >> >> I joined my CentOS into Windows Domain and I want to give > >> Permission to files and Directory via Active Directory. When I use > >> "getent passwd" and "getent group", I can see All AD users and > >> Groups. I use below command to give Permission to a Folder via ACL : > >> >> > >> >> setfacl -m g:"jasondomain\jason-rw":rwx > >> /home/local/jasondomain/jason/test > >> >> > >> >> and I create a part for my "smb.conf" file : > >> >> > >> >> [Test] > >> >> comment = test > >> >> path = /home/local/jasondomain/jason/test > >> >> browsable = yes > >> >> inherit acls = yes > >> >> inherit permissions = yes > >> >> inherit owner = yes > >> >> map acl inherit = yes > >> >> acl check permissions = yes > >> >> nt acl support = yes > >> >> #valid users = %D\%S > >> >> #write list = @jasondomain\domain^admins > >> >> read only = no > >> >> > >> >> > >> >> but when I browse the "Test" directory it ask me username and > >> password and when I enter "jasondomain\jason" as username it can't > >> let me to open the "Test" directory. What is the problem? > >> >> > >> > ---- > >> > Are you already logged into the server under different > >> credentials, > >> > like 'WORKGROUP', jason (i.e. do you already have some shares > mounted?) > >> > > >> > If I remember, Windows won't allow the same workstation to connect > >> under > >> > two different user id's. If you already have something mounted > >> from your > >> > workstation with different credentials, you need to close (unmount > >> / unmap) > >> > those other connections. > >> > > >> > Where did you setup the password for 'jasondomain\jason'? Again, > if you > >> > didn't set a password, more modern versions of windows won't allow > >> you to > >> > login (or attach a share) remotely. > >> > > >> > You don't say what happens when you try to open 'test'. You say it > >> > > >> > can't let > >> > you? What error message does it give you? > >> > >> > >> OK, If I understand you correctly, you have setup samba on a Centos > >> machine and joined it to a windows machine, is this correct ? > >> > >> Could you post the entire smb.conf from your Centos machine. > >> > >> Rowland > >> > >> -- > >> To unsubscribe from this list go to the following URL and read the > >> instructions: https://lists.samba.org/mailman/options/samba > >> > >> > >> > > OK, after wading through all the un-needed lines, I got this: > > > > [global] > > workgroup = MYGROUP > > server string = Samba Server Version %v > > # logs split per machine > > log file = /var/log/samba/log.%m > > # max 50KB per log file, then rotate > > max log size = 50 > > security = user > > passdb backend = tdbsam > > load printers = yes > > cups options = raw > > > > [homes] > > comment = Home Directories > > browseable = no > > writable = yes > > > > [printers] > > comment = All Printers > > path = /var/spool/samba > > browseable = no > > guest ok = no > > writable = no > > printable = yes > > > > [Test] > > comment = Public Stuff > > path = /home/local/HAMSHAHRY/jokar/test/ > > browsable = yes > > inherit acls = yes > > inherit permissions = yes > > inherit owner = yes > > map acl inherit = yes > > acl check permissions = yes > > nt acl support = yes > > read only = no > > > > Try changing 'security = user' to 'security = ads' and adding the > > required winbind & idmap lines, see: > > https://wiki.samba.org/index.php/Setup_a_Samba_AD_Member_Server > > > > Yes, I know it says 'member server', but you can use it for a client > > as well. > > > > Rowland > > > > > > > > Hi, you seem to be using **four**, yes four different workgroup (also > known as domain) names: > In smb.conf: MYGROUP & SAMDOM > When trying to login: jasondomain & WORKGROUP > > They all need to be the same, you also need to add uidNumber's to your > users and a gidNumber to at least 'Domain Users' > > > Rowland > > > > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/options/samba > >OK, in the last smb.conf you posted there are these lines: workgroup = MYGROUP idmap config SAMDOM:backend = ad idmap config SAMDOM:schema_mode = rfc2307 idmap config SAMDOM:range = 500-40000 Also in samba-1.png: Username: jasondomain\jason domain: WORKGROUP I make that 4 workgroup names, ok you have changed MYGROUP, but what about SAMDOM ? You also have 'winbind use default domain = yes' , because of this, you do not need to use 'jasondomain\jason', just 'jason' should work. Do you by any chance have a Unix user called 'jason' on the samba machine ? Also, when you try to login as 'jasondomain\jason' are you doing this on the samba machine ? Rowland -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
Apparently Analagous Threads
- Use Samba with ACL for read Active Directory and set Permissions via it.
- Use Samba with ACL for read Active Directory and set Permissions via it.
- Use Samba with ACL for read Active Directory and set Permissions via it.
- Use Samba with ACL for read Active Directory and set Permissions via it.
- Use Samba with ACL for read Active Directory and set Permissions via it.