Hi there!! I 'm changing the distribution from Suse8 to Fedora Core3. I have installed a new PDC server with : fedora core3, openldap, samba, and smbtools (that was included in samba) All sw above mentioned were installed with fedora core3. Now, I have my server working but.. I can't add a new machine (wXP) to this domain server. All my configuration are ok (samba+smbtools+openldap), 'cause all clients (old clients) can login to this new domain server, and they can see all maps (userFile.bat) in their machines. But, when I try to add a new machine to this domain server, It can't be done. I reviewed this file: /var/log/samba/nmbd.log and it says as follows....: [2005/05/30 11:53:05, 0] nmbd/nmbd_logonnames.c:become_logon_server_success(124) become_logon_server_success: Samba is now a logon server for workgroup XXNT on subnet 10.1.255.33 [2005/05/30 11:53:21, 0] nmbd/nmbd_logonnames.c:become_logon_server_success(124) become_logon_server_success: Samba is now a logon server for workgroup XXNT on subnet UNICAST_SUBNET [2005/05/30 11:53:23, 0] nmbd/nmbd_become_lmb.c:become_local_master_stage2(396) ***** Samba name server XXSERVER is now a local master browser for workgroup XXNT on subnet 10.1.255.33 ***** [2005/05/30 11:53:23, 0] nmbd/nmbd_become_dmb.c:become_domain_master_stage2(113) ***** Samba server XXSERVER is now a domain master browser for workgroup XXNT on subnet UNICAST_SUBNET ***** [2005/05/30 11:53:24, 0] nmbd/nmbd_become_dmb.c:become_domain_master_browser_bcast(282) become_domain_master_browser_bcast: Attempting to become domain master browser on workgroup XXNT on subnet 10.1.255.33 [2005/05/30 11:53:24, 0] nmbd/nmbd_become_dmb.c:become_domain_master_browser_bcast(295) become_domain_master_browser_bcast: querying subnet 10.1.255.33 for domain master browser on workgroup XXNT [2005/05/30 11:53:34, 0] nmbd/nmbd_become_dmb.c:become_domain_master_stage2(113) ***** Samba server XXSERVER is now a domain master browser for workgroup XXNT on subnet 10.1.255.33 ***** [2005/05/30 11:53:44, 0] nmbd/nmbd_browsesync.c:get_domain_master_name_node_status_fail(488) get_domain_master_name_node_status_fail: Doing a node status request to the domain master browser at IP 192.168.0.19 failed. Cannot get workgroup name. [2005/05/30 12:08:45, 0] nmbd/nmbd_browsesync.c:get_domain_master_name_node_status_fail(488) get_domain_master_name_node_status_fail: Doing a node status request to the domain master browser at IP 192.168.0.19 failed. Cannot get workgroup name. So, in a first time, I put 192.168.0.19 and 10.1.0.19 ip to my server, and then I ran samba and then I had to change this IP to 10.1.255.33. So, I understand that this UNICAT_SUBNET has registred the first IPs (192.168.0.19) and it's looking for it. I don't know why this UNICAST is lookng that IP and isn't it working with my actual IP 10.1.255.33.... And in this file: /var/cache/samba/wins.dat shows.....: [root@xxserver samba]# less wins.dat VERSION 1 0 "XXNT#00" 1117724724 255.255.255.255 e4R "XXNT#1b" 1117724724 10.1.255.33 192.168.0.19 64R "XXNT#1c" 1117724724 10.1.255.33 10.1.0.19 e4R "XXNT#1e" 1117724724 255.255.255.255 e4R "XXSERVER#00" 1117724724 10.1.255.33 192.168.0.19 10.1.0.19 66R "XXSERVER#03" 1117724724 10.1.255.33 192.168.0.19 10.1.0.19 66R "XXSERVER#20" 1117724724 10.1.255.33 192.168.0.19 10.1.0.19 66R ....shows all IP's history, since I installed my server.... If I reset this file will get the answer?, but I tried erasing and restarting the service...and nothig, always reload the same information shown above. The IP tha i want to work is 10.1.255.33 not other.... I hope I was clear..... Please, I can't find any help in internet.. (google), the only solution, I think, is to reinstall everything without changing IP.... I will appreciate if you can give some support ... Thanks a lot Emilio Herrera Lima -Per? emilanto@hotmail.com
Hi there!! I 'm changing the distribution from Suse8 to Fedora Core3. I have installed a new PDC server with : fedora core3, openldap, samba, and smbtools (that was included in samba) All sw above mentioned were installed with fedora core3. Now, I have my server working but.. I can't add a new machine (wXP) to this domain server. All my configuration are ok (samba+smbtools+openldap), 'cause all clients (old clients) can login to this new domain server, and they can see all maps (userFile.bat) in their machines. But, when I try to add a new machine to this domain server, It can't be done. I reviewed this file: /var/log/samba/nmbd.log and it says as follows....: [2005/05/30 11:53:05, 0] nmbd/nmbd_logonnames.c:become_logon_server_success(124) become_logon_server_success: Samba is now a logon server for workgroup XXNT on subnet 10.1.255.33 [2005/05/30 11:53:21, 0] nmbd/nmbd_logonnames.c:become_logon_server_success(124) become_logon_server_success: Samba is now a logon server for workgroup XXNT on subnet UNICAST_SUBNET [2005/05/30 11:53:23, 0] nmbd/nmbd_become_lmb.c:become_local_master_stage2(396) ***** Samba name server XXSERVER is now a local master browser for workgroup XXNT on subnet 10.1.255.33 ***** [2005/05/30 11:53:23, 0] nmbd/nmbd_become_dmb.c:become_domain_master_stage2(113) ***** Samba server XXSERVER is now a domain master browser for workgroup XXNT on subnet UNICAST_SUBNET ***** [2005/05/30 11:53:24, 0] nmbd/nmbd_become_dmb.c:become_domain_master_browser_bcast(282) become_domain_master_browser_bcast: Attempting to become domain master browser on workgroup XXNT on subnet 10.1.255.33 [2005/05/30 11:53:24, 0] nmbd/nmbd_become_dmb.c:become_domain_master_browser_bcast(295) become_domain_master_browser_bcast: querying subnet 10.1.255.33 for domain master browser on workgroup XXNT [2005/05/30 11:53:34, 0] nmbd/nmbd_become_dmb.c:become_domain_master_stage2(113) ***** Samba server XXSERVER is now a domain master browser for workgroup XXNT on subnet 10.1.255.33 ***** [2005/05/30 11:53:44, 0] nmbd/nmbd_browsesync.c:get_domain_master_name_node_status_fail(488) get_domain_master_name_node_status_fail: Doing a node status request to the domain master browser at IP 192.168.0.19 failed. Cannot get workgroup name. [2005/05/30 12:08:45, 0] nmbd/nmbd_browsesync.c:get_domain_master_name_node_status_fail(488) get_domain_master_name_node_status_fail: Doing a node status request to the domain master browser at IP 192.168.0.19 failed. Cannot get workgroup name. So, in a first time, I put 192.168.0.19 and 10.1.0.19 ip to my server, and then I ran samba and then I had to change this IP to 10.1.255.33. So, I understand that this UNICAT_SUBNET has registred the first IPs (192.168.0.19) and it's looking for it. I don't know why this UNICAST is lookng that IP and isn't it working with my actual IP 10.1.255.33.... And in this file: /var/cache/samba/wins.dat shows.....: [root@xxserver samba]# less wins.dat VERSION 1 0 "XXNT#00" 1117724724 255.255.255.255 e4R "XXNT#1b" 1117724724 10.1.255.33 192.168.0.19 64R "XXNT#1c" 1117724724 10.1.255.33 10.1.0.19 e4R "XXNT#1e" 1117724724 255.255.255.255 e4R "XXSERVER#00" 1117724724 10.1.255.33 192.168.0.19 10.1.0.19 66R "XXSERVER#03" 1117724724 10.1.255.33 192.168.0.19 10.1.0.19 66R "XXSERVER#20" 1117724724 10.1.255.33 192.168.0.19 10.1.0.19 66R ....shows all IP's history, since I installed my server.... If I reset this file will I get the answer?, but I tried erasing and restarting the service...and nothig, always reload the same information shown above. The IP tha i want to work is 10.1.255.33 not other.... I hope I was clear..... Please, I can't find any help in internet.. (google), the only solution, I think, is to reinstall everything without changing IP.... I will appreciate if you can give some support ... Thanks a lot Emilio Herrera Lima -Per? emilanto@hotmail.com
EMILIO ANTONIO HERRERA TRUJILLO
2005-Jun-14 21:40 UTC
[Samba] RE: Cannot get workgroup name
I found two answer. 1. Change the network card 2. reinstall every thing Saludos Emilio Herrera Lima -Per?>From: "EMILIO ANTONIO HERRERA TRUJILLO" <emilanto@hotmail.com> >To: samba@samba.org >Subject: Cannot get workgroup name >Date: Mon, 30 May 2005 17:41:35 +0000 > >Hi there!! > >I 'm changing the distribution from Suse8 to Fedora Core3. >I have installed a new PDC server with : >fedora core3, >openldap, >samba, >and smbtools (that was included in samba) > >All sw above mentioned were installed with fedora core3. Now, I have my >server working but.. I can't add a new machine (wXP) to this domain server. > >All my configuration are ok (samba+smbtools+openldap), 'cause all clients >(old clients) can login to this new domain server, and they can see all >maps (userFile.bat) in their machines. > >But, when I try to add a new machine to this domain server, It can't be >done. I reviewed this file: /var/log/samba/nmbd.log and it says as >follows....: > >[2005/05/30 11:53:05, 0] >nmbd/nmbd_logonnames.c:become_logon_server_success(124) > become_logon_server_success: Samba is now a logon server for workgroup >XXNT on subnet 10.1.255.33 >[2005/05/30 11:53:21, 0] >nmbd/nmbd_logonnames.c:become_logon_server_success(124) > become_logon_server_success: Samba is now a logon server for workgroup >XXNT on subnet UNICAST_SUBNET >[2005/05/30 11:53:23, 0] >nmbd/nmbd_become_lmb.c:become_local_master_stage2(396) > ***** > > Samba name server XXSERVER is now a local master browser for workgroup >XXNT on subnet 10.1.255.33 > > ***** >[2005/05/30 11:53:23, 0] >nmbd/nmbd_become_dmb.c:become_domain_master_stage2(113) > ***** > > Samba server XXSERVER is now a domain master browser for workgroup XXNT >on subnet UNICAST_SUBNET > > ***** >[2005/05/30 11:53:24, 0] >nmbd/nmbd_become_dmb.c:become_domain_master_browser_bcast(282) > become_domain_master_browser_bcast: > Attempting to become domain master browser on workgroup XXNT on subnet >10.1.255.33 >[2005/05/30 11:53:24, 0] >nmbd/nmbd_become_dmb.c:become_domain_master_browser_bcast(295) > become_domain_master_browser_bcast: querying subnet 10.1.255.33 for >domain master browser on workgroup XXNT >[2005/05/30 11:53:34, 0] >nmbd/nmbd_become_dmb.c:become_domain_master_stage2(113) > ***** > > Samba server XXSERVER is now a domain master browser for workgroup XXNT >on subnet 10.1.255.33 > > ***** >[2005/05/30 11:53:44, 0] >nmbd/nmbd_browsesync.c:get_domain_master_name_node_status_fail(488) > get_domain_master_name_node_status_fail: > Doing a node status request to the domain master browser at IP >192.168.0.19 failed. > Cannot get workgroup name. >[2005/05/30 12:08:45, 0] >nmbd/nmbd_browsesync.c:get_domain_master_name_node_status_fail(488) > get_domain_master_name_node_status_fail: > Doing a node status request to the domain master browser at IP >192.168.0.19 failed. > Cannot get workgroup name. > >So, in a first time, I put 192.168.0.19 and 10.1.0.19 ip to my server, and >then I ran samba and then I had to change this IP to 10.1.255.33. So, I >understand that this UNICAT_SUBNET has registred the first IPs >(192.168.0.19) and it's looking for it. I don't know why this UNICAST is >lookng that IP and isn't it working with my actual IP 10.1.255.33.... > >And in this file: /var/cache/samba/wins.dat shows.....: > >[root@xxserver samba]# less wins.dat >VERSION 1 0 >"XXNT#00" 1117724724 255.255.255.255 e4R >"XXNT#1b" 1117724724 10.1.255.33 192.168.0.19 64R >"XXNT#1c" 1117724724 10.1.255.33 10.1.0.19 e4R >"XXNT#1e" 1117724724 255.255.255.255 e4R >"XXSERVER#00" 1117724724 10.1.255.33 192.168.0.19 10.1.0.19 66R >"XXSERVER#03" 1117724724 10.1.255.33 192.168.0.19 10.1.0.19 66R >"XXSERVER#20" 1117724724 10.1.255.33 192.168.0.19 10.1.0.19 66R > >....shows all IP's history, since I installed my server.... If I reset this >file will get the answer?, but I tried erasing and restarting the >service...and nothig, always reload the same information shown above. The >IP tha i want to work is 10.1.255.33 not other.... > >I hope I was clear..... > >Please, I can't find any help in internet.. (google), the only solution, I >think, is to reinstall everything without changing IP.... > >I will appreciate if you can give some support ... > >Thanks a lot > >Emilio Herrera >Lima -Per? >emilanto@hotmail.com > >