Thomas, Daniel J.
2002-Feb-27 08:11 UTC
[Samba] RE: ANY HOPE GETTING RESPONSE TO QUESTIONS? - samba3.0alpha15 - s olar is 8
Just replying to let you know I'm listening =)... Sorry Dave, I'm running 2.2.3a on my Solaris 8 machine and even that still has some issues with winbind. By the way, while I have the attention of you Solaris Gurus... I was trying to make my Ultra 1 boot from an external disk on the same scssi channel as the default boot disk. I changed my /etc/vfstab for the new disk to have the right device references. Then I went to prom level and used "setenv boot-device disk2" (c0t2d0s0). It boots fine, but after I repartitioned disk0, I get some kind of mounting error when I rebooted like it's still trying to mount "/" as c0t0d0s0. Before I reconfigured disk0 it booted without an error and a "df -k" didn't show c0t0d0s0 mounted and correctly returned c0t2d0s0 mounted as "/". After re-partitioning disk0 with partition 0 as the free hog, I wasn't able to create the file system on it. It insisted that it couldn't make the file system because "/dev/dsk/c0t2d0s0 was mounted as /" At one point I noticed that the link that sun uses to link the device files in /dev/dsk to the actual devices had c0t0d0s0 mapped to scssi ID 2 rather then scssi ID 0. I went to prom and did a "boot -r" and this fixed the problem, but I still couldn't "newfs /dev/rdsk/c0t0d0s0". Is this behavior some sort of OS bug? Does Solaris make a link from c0t0d0s0 to your boot device for some kind of compatibility issue? -Dan -----Original Message----- From: David Edward Shapiro [mailto:David.Edward.Shapiro@btitele.com] Sent: Wednesday, February 27, 2002 9:08 AM To: 'samba@lists.samba.org' Cc: 'samba-technical@lists.samba.org' Subject: ANY HOPE GETTING RESPONSE TO QUESTIONS? - samba3.0alpha15 - solar is 8 Several questions posted with no reponse for solaris 8, samba3.0alpha15: * testparm whining about valid.dat, users.dat, etc. (If you copy those files from the source directory and plop them in /usr/local/samba/lib, my users can not map a drive or send files with smbclient to nt share.) Testparm output errors: incorrect size for /usr/local/samba/lib/valid.dat - got 0 expected 65536 creating default valid table incorrect size for /usr/local/samba/lib/valid.dat - got 0 expected 65536 creating default valid table * How do you stop this handle_source_env error: handle_source_env: Failed to open file , Error was No such file or directory Unable to copy service - source not found: * Why does testparm complain about can't find include file? Can't find include file * Why does samba after recent changes to alpha15 now complain about conversion not supported? Conversion from UCS-2LE to UTF-8 not supported Conversion from ASCII to UTF-8 not supported Conversion from ASCII to UTF-8 not supported Conversion from ASCII to UTF-8 not supported Conversion from UTF-8 to UCS-2LE not supported Conversion from UTF-8 to ASCII not supported Conversion from UTF-8 to ASCII not supported Conversion from UTF-8 to ASCII not supported * Why does getent passwd on solaris return some junk in output? INS+DavidSha:x,ha:10304:1000:David Edward Shapiro:/export/home/winnt/INS/davidsha:/bin/false Note the x,ha * Why if wbinfo -u/-g/-t returns correct results, getent passwd/getent group returns lines (although Domain Users group does not display because it is too big for solaris version and user line has junk as shown in previous item?!?) doesn't samba let these users gain access to my shares if I list them as valid users (e.g., valid users = INS+DavidSha). The log for the workstation trying to connect says invalid user davidsha instead of checking for INS+DavidSha: check_password: Authenticaion for user [davidsha] -> [davidsha] FAILED with error NT_STATUS_NO_SUCH_USER Note spelling error for Authentication What needs to change to get it to look for INS+DavidSha instead of davidsha? The only way I can get this working is to create a user called davidsha in /etc/passwd, which circumvents the use of winbindd. I have winbindd working on linux fine and another solaris 8 box. The difference is that this box is running in 32 bit mode, and the other is running in 64 bit mode. I downloaded gcc 3.0.4, the lastest binutils, libtools and buildt them fresh yesterday and then rebuildt samba, but it did not fix any of the above issues. Note that the other solaris box has the garbage in the getent passwd too, but it authenticates INS+DavidSha, which is why it is working. Note: If I add the user davidsha in /etc/passwd (i.e., davidsha:x:1019:1000:NT User:/dev/null:/bin/false) and then run smbclient -L enterprise -U INS+DavidSha, I get a list of shares?!? If I remove the davidsha entry the smbclient command fails * wbinfo -t gets secret good and every few tries it says bad. Why would it be losing the secret and getting bad like this? Note that for the previous bullet, I can run the smbclient over and over and over and it will never work if entry is not in /etc/passwd, but it will work with entry in /etc/passwd in same sporadic way as the secret fails and recovers. David E. Shapiro Senior Unix Admin <<log.smbd.txt>> <<log.winbindd.txt>> <<log.nmbd.txt>> <<log.bti-c2433.txt>> <<smb.conf>> BTi - the future of communications4300 Six Forks Road, Raleigh, NC 27609
Reasonably Related Threads
- ANY HOPE GETTING RESPONSE TO QUESTIONS? - samba3.0alpha15 - sola ris 8
- Re: ANY HOPE GETTING RESPONSE TO QUESTIONS? - samba3.0alpha15 - solar is 8
- ZFS root clone problem
- RE: solaris 8/samba3.0alpha15: ld.so.1: ls: fatal: relocation err or: file /lib/nss_winbind.so.1: symbol socket: referenced symbol not fou nd
- solaris 8/samba3.0alpha15: ld.so.1: ls: fatal: reloca tion error: file /lib/nss_winbind.so.1: symbol socket: referenced symbol not found