Hello all, Just wondering if there's a way to show the documents in queue for the windows 2000 clients. Although the pending jobs appear on the CUPS queue, the Windows 2000 queue does not show any pending jobs. This way, clients don't know the status of the printer. Is this a normal behavior? Versions: SAMBA_2_2 cvs, CUPS 1.1.10, Red Hat 7.1, Windows 2000 SP1 clients. cheers Gustavo
I have seen this question before, but haven't seen a response.
On my windows 95/98 box, I do get the expected print queue behavior on the
windows box, that is to say, a print job sent to the samba server shows up
in the queue on the windows box. The job may be deleted if desired from the
windows box.
It may be your printer share set up. I am not sure if everyone puts in all the
commands necessary for this in their printer share definition. Certainly, by
default, they are not all there. I also don't know about the level of
support in all versions of samba for CUPS. There is support for cups in my samba
2.2.1a.
To test the printer queues, have you tried turning the printer off? It may
be that the jobs are dumped on the printer so quickly they just disappear
from all queues, whether on the server or on the windows box.
I use lprng. The share below is my "raw" filter for a lexmark z53
which takes output from
a windows box and just dumps it onto the printer. This may be simplistic,
since there is a printer filter listed in this queue, but, I forget now just
what it is supposed to do. It works, so I am not going to think about it.
Now, a wrinkle, which I am not going to bother with, is how this would work
if the job were first sent to a bounce queue on one linux server before
being sent to the final destination server.
Joel
[lp]
comment = Raw Printer for Z53
path = /tmp
create mask = 0700
guest ok = Yes
hosts allow = 192.168.
printable = Yes
printing = lprng
# print command = echo "Tried to print %s" > /tmp/junk.%s
print command = /usr/bin/lpr -Plp %s; rm %s
lpq command = /usr/bin/lpq -Plp
lprm command = /usr/bin/lprm -Plp %j
lppause command = /usr/bin/lpc hold lp %j
lpresume command = /usr/bin/lpc release lp %j
printer name = lp
printer driver = Lexmark Z53 Series ColorFine
printer driver location = \\HAMMER2\AllFiles\usr\local\samba\printer
share modes = No
On Mon, Oct 08, 2001 at 03:49:58PM +0100, Michels, Gustavo [EES/BR]
wrote:> Hello all,
>
> Just wondering if there's a way to show the documents in queue for the
> windows 2000 clients. Although the pending jobs appear on the CUPS queue,
> the Windows 2000 queue does not show any pending jobs. This way, clients
> don't know the status of the printer.
>
> Is this a normal behavior?
>
> Versions: SAMBA_2_2 cvs, CUPS 1.1.10, Red Hat 7.1, Windows 2000 SP1
clients.
>
> cheers
> Gustavo
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
Hi,
Actually, I see the print job in the queue, but it goes away after the job
enters the cups spool area. I mean, if I send a 50 page document, the job
appears in the windows queue but goes away really fast, although the printer
is still working on that job. This way, other users cannot see the printer
is busy, or even delete the pending job, or see how many jobs are left to be
printed. I have also quit trying to see the number of pages being printed
displayed in the queue.
I tried to search for some docs on this, but everything I find says the only
setting I need is 'printing = cups'. While I used LPRng, I had to enter
all
those print commands you mentioned below so the queue showed correctly
(well, not THAT correctly).
No replies in the cups mailing list. I guess I will have to live with
that... :(
cheers
Gustavo
-----Original Message-----
From: Joel Hammer [mailto:Joel@HammersHome.com]
Sent: segunda-feira, 8 de outubro de 2001 19:15
To: Michels, Gustavo [EES/BR]; samba@lists.samba.org
Subject: Re: Cups, Samba and Print Queues
I have seen this question before, but haven't seen a response.
On my windows 95/98 box, I do get the expected print queue behavior on the
windows box, that is to say, a print job sent to the samba server shows up
in the queue on the windows box. The job may be deleted if desired from the
windows box.
It may be your printer share set up. I am not sure if everyone puts in all
the
commands necessary for this in their printer share definition. Certainly, by
default, they are not all there. I also don't know about the level of
support in all versions of samba for CUPS. There is support for cups in my
samba 2.2.1a.
To test the printer queues, have you tried turning the printer off? It may
be that the jobs are dumped on the printer so quickly they just disappear
from all queues, whether on the server or on the windows box.
I use lprng. The share below is my "raw" filter for a lexmark z53
which
takes output from
a windows box and just dumps it onto the printer. This may be simplistic,
since there is a printer filter listed in this queue, but, I forget now just
what it is supposed to do. It works, so I am not going to think about it.
Now, a wrinkle, which I am not going to bother with, is how this would work
if the job were first sent to a bounce queue on one linux server before
being sent to the final destination server.
Joel
[lp]
comment = Raw Printer for Z53
path = /tmp
create mask = 0700
guest ok = Yes
hosts allow = 192.168.
printable = Yes
printing = lprng
# print command = echo "Tried to print %s" > /tmp/junk.%s
print command = /usr/bin/lpr -Plp %s; rm %s
lpq command = /usr/bin/lpq -Plp
lprm command = /usr/bin/lprm -Plp %j
lppause command = /usr/bin/lpc hold lp %j
lpresume command = /usr/bin/lpc release lp %j
printer name = lp
printer driver = Lexmark Z53 Series ColorFine
printer driver location = \\HAMMER2\AllFiles\usr\local\samba\printer
share modes = No
On Mon, Oct 08, 2001 at 03:49:58PM +0100, Michels, Gustavo [EES/BR]
wrote:> Hello all,
>
> Just wondering if there's a way to show the documents in queue for the
> windows 2000 clients. Although the pending jobs appear on the CUPS queue,
> the Windows 2000 queue does not show any pending jobs. This way, clients
> don't know the status of the printer.
>
> Is this a normal behavior?
>
> Versions: SAMBA_2_2 cvs, CUPS 1.1.10, Red Hat 7.1, Windows 2000 SP1
clients.>
> cheers
> Gustavo
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
Hello, I saw the default print command settings and they are the same as lprng. Only the lppause and lpresume weren't set. Not working yet... :( The problem(?) is the job being transferred from the samba spool dir to the cups spool dir. Actually not a problem, but I don't see a solution in this case. cheers Gustavo -----Original Message----- From: Joel Hammer [mailto:Joel@HammersHome.com] Sent: ter?a-feira, 9 de outubro de 2001 09:51 To: Michels, Gustavo [EES/BR]; samba@lists.samba.org Subject: Re: Cups, Samba and Print Queues Have you tried entering all those commands for control on the print queue in your smb.conf which relete to cups? Worth a try. Joel On Tue, Oct 09, 2001 at 01:26:23PM +0100, Michels, Gustavo [EES/BR] wrote:> Hi, > > Actually, I see the print job in the queue, but it goes away after the job > enters the cups spool area. I mean, if I send a 50 page document, the job > appears in the windows queue but goes away really fast, although theprinter> is still working on that job. This way, other users cannot see the printer > is busy, or even delete the pending job, or see how many jobs are left tobe> printed. I have also quit trying to see the number of pages being printed > displayed in the queue. > > I tried to search for some docs on this, but everything I find says theonly> setting I need is 'printing = cups'. While I used LPRng, I had to enterall> those print commands you mentioned below so the queue showed correctly > (well, not THAT correctly). > > No replies in the cups mailing list. I guess I will have to live with > that... :( > > cheers > Gustavo