Hi,
I have a problem, kindly help me. I had installed Samba 2.0.7 in a
Solaris 8 server in a windows NT worgroup setup and in the smb.conf file had
shared individually all the folders. It was working fine. Now we have
converted out NT systems to Domain setup. Now I tried to point samba
validations to the NT PDC. It was not working properly. Then I totally
uninstalled, deleted all the folders and reinstalled samba. Now I removed
all the individual shares and shared the Home folder. And I configured for
NT Domain validation. Now it is working correctly.
The problem is when we open the system in Network Neighborhood it is
showing 2 shares with different names (but pointing to the same folder)
whereas I have specified only one share in the smb.conf file. Can anyone
tell me from where it is taking the other share details. I tested the
smb.conf file with testparm command and it is specifying only the share that
is in the smb.conf file.
I would be very thankful if helped.
Regards,
Ravi.
***********************************************************************
Disclaimer:
This document is intended for transmission to the named recipient only. If
you are not that person, you should note that legal rights reside in this
document and you are not authorized to access, read, disclose, copy, use or
otherwise deal with it and any such actions are prohibited and may be
unlawful. The views expressed in this document are not necessarily those of
HCL Technologies Ltd. Notice is hereby given that no representation,
contract or other binding obligation shall be created by this e-mail, which
must be interpreted accordingly. Any representations, contractual rights or
obligations shall be separately communicated in writing and signed in the
original by a duly authorized officer of the relevant company.
***********************************************************************
Hi, Shares are only declared in smb.conf. Post your smb.conf so anyone can help you better. cheers Gustavo> -----Original Message----- > From: Ravishankar S. (VODC) - CTD, Chennai. > [mailto:ravi_s@ctd.hcltech.com] > Sent: ter?a-feira, 25 de setembro de 2001 03:49 > To: samba@samba.org > Subject: Sharing problems > > > Hi, > > I have a problem, kindly help me. I had installed > Samba 2.0.7 in a > Solaris 8 server in a windows NT worgroup setup and in the > smb.conf file had > shared individually all the folders. It was working fine. > Now we have > converted out NT systems to Domain setup. Now I tried to point samba > validations to the NT PDC. It was not working properly. > Then I totally > uninstalled, deleted all the folders and reinstalled samba. > Now I removed > all the individual shares and shared the Home folder. And I > configured for > NT Domain validation. Now it is working correctly. > > The problem is when we open the system in Network > Neighborhood it is > showing 2 shares with different names (but pointing to the > same folder) > whereas I have specified only one share in the smb.conf file. > Can anyone > tell me from where it is taking the other share details. I tested the > smb.conf file with testparm command and it is specifying only > the share that > is in the smb.conf file. > > I would be very thankful if helped. > > Regards, > Ravi. > > > > > ************************************************************** > ********* > Disclaimer: > This document is intended for transmission to the named > recipient only. If > you are not that person, you should note that legal rights > reside in this > document and you are not authorized to access, read, > disclose, copy, use or > otherwise deal with it and any such actions are prohibited and may be > unlawful. The views expressed in this document are not > necessarily those of > HCL Technologies Ltd. Notice is hereby given that no representation, > contract or other binding obligation shall be created by this > e-mail, which > must be interpreted accordingly. Any representations, > contractual rights or > obligations shall be separately communicated in writing and > signed in the > original by a duly authorized officer of the relevant company. > ************************************************************** > ********* > > > > -- > To unsubscribe from this list go to the following URL and read the > instructions: http://lists.samba.org/mailman/listinfo/samba >
Hi,
Thanks a lot for your reply. I am attaching the smb.conf file.
Actually it is showing 2 shares (one is the "home" share declared in
smb.conf file and another folder with the respective netbios username but
pointing to the same path, but not declared in the smb.conf file). Since
both are pointing to the same path I would like to remove the username
share. Kindly suggest how to sort it out.
Regards,
Ravi.
-----Original Message-----
From: Michels, Gustavo [EES/BR]
[mailto:gustavo.michels@emersonenergy.com]
Sent: Tuesday, September 25, 2001 5:00 PM
To: Ravishankar S. (VODC) - CTD, Chennai.; samba@samba.org
Subject: RE: Sharing problems
Hi,
Shares are only declared in smb.conf. Post your smb.conf so anyone can help
you better.
cheers
Gustavo
> -----Original Message-----
> From: Ravishankar S. (VODC) - CTD, Chennai.
> [mailto:ravi_s@ctd.hcltech.com]
> Sent: ter?a-feira, 25 de setembro de 2001 03:49
> To: samba@samba.org
> Subject: Sharing problems
>
>
> Hi,
>
> I have a problem, kindly help me. I had installed
> Samba 2.0.7 in a
> Solaris 8 server in a windows NT worgroup setup and in the
> smb.conf file had
> shared individually all the folders. It was working fine.
> Now we have
> converted out NT systems to Domain setup. Now I tried to point samba
> validations to the NT PDC. It was not working properly.
> Then I totally
> uninstalled, deleted all the folders and reinstalled samba.
> Now I removed
> all the individual shares and shared the Home folder. And I
> configured for
> NT Domain validation. Now it is working correctly.
>
> The problem is when we open the system in Network
> Neighborhood it is
> showing 2 shares with different names (but pointing to the
> same folder)
> whereas I have specified only one share in the smb.conf file.
> Can anyone
> tell me from where it is taking the other share details. I tested the
> smb.conf file with testparm command and it is specifying only
> the share that
> is in the smb.conf file.
>
> I would be very thankful if helped.
>
> Regards,
> Ravi.
>
>
>
>
> **************************************************************
> *********
> Disclaimer:
> This document is intended for transmission to the named
> recipient only. If
> you are not that person, you should note that legal rights
> reside in this
> document and you are not authorized to access, read,
> disclose, copy, use or
> otherwise deal with it and any such actions are prohibited and may be
> unlawful. The views expressed in this document are not
> necessarily those of
> HCL Technologies Ltd. Notice is hereby given that no representation,
> contract or other binding obligation shall be created by this
> e-mail, which
> must be interpreted accordingly. Any representations,
> contractual rights or
> obligations shall be separately communicated in writing and
> signed in the
> original by a duly authorized officer of the relevant company.
> **************************************************************
> *********
>
>
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
>
***********************************************************************
Disclaimer:
This document is intended for transmission to the named recipient only. If
you are not that person, you should note that legal rights reside in this
document and you are not authorized to access, read, disclose, copy, use or
otherwise deal with it and any such actions are prohibited and may be
unlawful. The views expressed in this document are not necessarily those of
HCL Technologies Ltd. Notice is hereby given that no representation,
contract or other binding obligation shall be created by this e-mail, which
must be interpreted accordingly. Any representations, contractual rights or
obligations shall be separately communicated in writing and signed in the
original by a duly authorized officer of the relevant company.
***********************************************************************
-------------- next part --------------
[global]
security = domain
workgroup = milkyway
password server = alpha
encrypt passwords = yes
log file = /var/log/samba/log.%m
max log size = 50
server string = Jupiter home dirs
[homes]
path = /home
read only = no