=================================================================
"Insanity: doing the same thing
over and over again and expecting
different results."
Albert Einstein
=================================================================
Release Announcements
---------------------
This is is the first stable release of Samba 4.1.
Samba 4.1 will be the next version of the Samba suite and includes
all the technology found in both the Samba4 series and the stable 3.x
series. The primary additional features over Samba 3.6 are
support for the Active Directory logon protocols used by Windows 2000
and above.
Major enhancements in Samba 4.1.0 include:
Client tools support SMB2/3
==========================
Samba 4.1.0 contains the first release of our client tools
and client library that work over the new protocols SMB2 or SMB3.
Note that SMB3 only works either to a Samba server version 4.0.0
or above, or to a Windows Server running Windows 2012 or Windows 8.
The default protocol for smbclient and smbcacls is still
SMB1 (the NT1 protocol dialect). An SMB2 or SMB3 connection
can be selected in one of two ways. The easiest way to test
the new protocol connection is to add the -mMAX_PROTOCOL
command line switch to either smbclient or smbcacls.
For example, to connect using SMB3 with smbclient a user
would type:
smbclient //server/share -Uuser%password -mSMB3
Another example of connecting using SMB2 using smbcacls
would be:
smbcacls //server/share -Uuser%password -mSMB2 filename
Note that when connecting using SMB2 or SMB3 protocols
the UNIX extensions are no longer available inside the
smbclient command set. This is due to UNIX extensions
not yet being defined for the SMB2 or SMB3 protocols.
The second way to select SMB2 or SMB3 connections is to
set the "client max protocol" parameter in the [global]
section of your smb.conf.
Setting this parameter will cause all client connections
from Samba and its client tools to offer the requested
max protocol to a server on every connection request.
For example, to cause all client tools (including winbindd,
rpcclient, and the libsmbclient library) to attempt use SMB3
by default add the line:
client max protocol = SMB3
to the [global] section of your smb.conf. This has not
been as widely tested as the -mPROTOCOL options, but
is intended to work correctly in the final release of
4.1.0.
Encrypted transport
==================
Although Samba servers have supported encrypted transport
connections using the UNIX extensions for many years,
selecting SMB3 transport allows encrypted transport
connections to Windows servers that support SMB3, as
well as Samba servers.
In order to enable this, add the "-e" option to the
smbclient command line.
For example, to connect to a Windows 2012 server over
SMB3 and select an encrypted transport you would use
the following command line:
smbclient //Win2012Server/share -Uuser%password -mSMB3 -e
Directory database replication (AD DC mode)
==========================================
Directory replication has been reworked in order to improve the
correctness and efficiency.
As a net effect of it, replication with other domain controllers with
a heavily modified schema is now possible (ie. Windows 2012 DCs or
other Windows DC with exchange installed) and replication didn''t fail
anymore in such environments.
Server-Side Copy Support
=======================
Samba 4.1.0 adds support for server-side copy operations via the SMB2
FSCTL_SRV_COPYCHUNK request. Clients making use of server-side copy
support, such as Windows Server 2012, should experience considerable
performance improvements for file copy operations, as file data need not
traverse the network.
This feature is enabled by default on the smbd file server.
Btrfs Filesystem Integration
===========================
The Btrfs VFS module provided with Samba 4.1.0 further improves the
performance of server-side copy operations on shares backed by a Btrfs
filesystem. It does so by allowing multiple files to share the same
on-disk extents, avoiding the unnecessary duplication of source and
destination file data during a server-side copy operation.
This feature can be explicitly enabled on smbd shares backed by a Btrfs
filesystem with the smb.conf parameter:
vfs objects = btrfs
REMOVED COMPONENTS
=================
The Samba Web Administration Tool (SWAT) has been removed.
Details why SWAT has been removed can be found on the samba-technical mailing
list:
https://lists.samba.org/archive/samba-technical/2013-February/090572.html
######################################################################
Changes
#######
smb.conf changes
----------------
Parameter Name Description Default
-------------- ----------- -------
acl allow execute always New False
password level Removed
set directory Removed
use ntdb New No
RUNNING Samba 4.1 as an AD DC
============================
A short guide to setting up Samba as an AD DC can be found on the wiki:
https://wiki.samba.org/index.php/Samba_AD_DC_HOWTO
COMMIT HIGHLIGHTS
================
o Jeremy Allison <jra@samba.org>
* Add SMB2 and SMB3 support for client tools and client library.
* Add support for SMB3 Encrypted transport.
o David Disseldorp <ddiss@samba.org>
* Add vfs_btrfs module.
* Add support for server-side copy operations via the
SMB2 FSCTL_SRV_COPYCHUNK request.
CHANGES SINCE 4.1.0rc4
=====================
o Stefan Metzmacher <metze@samba.org>
* BUG 10178: Fix PAC parsing failure.
o Andreas Schneider <asn@samba.org>
* BUG 10132: pam_winbindd: Support the KEYRING ccache type.
CHANGES SINCE 4.1.0rc3
=====================
o Michael Adam <obnox@samba.org>
* BUG 10134: Add "acl allow execute always" parameter.
o Jeremy Allison <jra@samba.org>
* BUG 10139: Valid utf8 filenames cause "invalid conversion error"
messages.
* BUG 10145: Samba SMB2 client code reads the wrong short name length in a
directory listing reply.
* BUG 10149: cli_smb2_get_ea_list_path() failed to close file on exit.
* BUG 10150: Not all OEM servers support the ALTNAME info level.
o Andrew Bartlett <abartlet@samba.org>
* BUG 8077: dsdb: Convert the full string from UTF16 to UTF8, including
embedded NULLs.
* BUG 9461: python-samba-tool fsmo: Do not give an error on a successful
role transfer.
* BUG 10157: Regression causes replication failure with Windows 2008R2 and
deletes Deleted Objects.
o Günther Deschner <gd@samba.org>
* BUG 10147: Better document potential implications of a globally used
"valid users".
o Korobkin <korobkin+samba@gmail.com>
* BUG 10118: Raise the level of a debug when unable to open a printer.
o Volker Lendecke <vl@samba.org>
* BUG 10008: dbwrap_ctdb: Treat empty records as non-existing.
* BUG 10138: smbd: Always clean up share modes after hard crash.
o Daniel Liberman <danielvl@gmail.com>
* BUG 10162: Fix POSIX ACL mapping when setting DENY ACE''s from
Windows.
o Stefan Metzmacher <metze@samba.org>
* BUG 10144: libcli/smb: Use SMB1 MID=0 for the initial Negprot.
* BUG 10146: libcli/smb: Only check the SMB2 session setup signature if
required and valid.
o Matthieu Patou <mat@matws.net>
* BUG 10158: Netbios related samba process consumes 100% CPU.
o Christof Schmitt <christof.schmitt@us.ibm.com>
* BUG 10137: vfs_shadow_copy2: Display previous versions correctly over
SMB2.
CHANGES SINCE 4.1.0rc2
=====================
o Michael Adam <obnox@samba.org>
* BUG 10107: Fix Winbind crashes on DC with trusted AD domains.
o Jeremy Allison <jra@samba.org>
* BUG 5917: Fix working on site with Read Only Domain Controller.
* BUG 9974: Add SMB2 and SMB3 support for smbclient.
* BUG 10063: Fix memory leak in source3/lib/util.c:1493.
* BUG 10121: Masks incorrectly applied to UNIX extension permission
changes.
o Christian Ambach <ambi@samba.org>
* BUG 9911: Build Samba 4.0.x on AIX with IBM XL C/C++.
o Andrew Bartlett <abartlet@samba.org>
* BUG 9091: When replicating DNS for bind9_dlz we need to create the
server-DNS account remotely.
o Günther Deschner <gd@samba.org>
* BUG 9615: Winbind unable to retrieve user information from AD.
* BUG 9899: winbind_lookup_names() fails because of
NT_STATUS_CANT_ACCESS_DOMAIN_INFO.
* BUG 10107: Fix Winbind crashes on DC with trusted AD domains.
o Volker Lendecke <vl@samba.org>
* BUG 10086: smbd: Fix async echo handler forking.
* BUG 10106: Honour output buffer length set by the client for SMB2 GetInfo
requests.
* BUG 10114: Handle Dropbox (write-only-directory) case correctly
in pathname lookup.
o Stefan Metzmacher <metze@samba.org>
* BUG 10030: ::1 added to nameserver on join.
o Rusty Russell <rusty@rustcorp.com.au>
* BUG 10000: Add man pages for ntdb tools.
o Karolin Seeger <kseeger@samba.org>
* BUG 7364: Add man page for vfs_syncops.
* BUG 7490: Add man page for vfs_linux_xfs_sgid.
* BUG 10001: Add man page for samba-regedit tool.
* BUG 10076: Fix variable list in vfs_crossrename man page.
o Andreas Schneider <asn@samba.org>
* BUG 10073: Fix segmentation fault in ''net ads join''.
* BUG 10082: s3-winbind: Fix a segfault passing NULL to a fstring argument.
o Richard Sharpe <realrichardsharpe@gmail.com>
* BUG 10097: MacOSX 10.9 will not follow path-based DFS referrals handed
out by Samba.
o Ralph Wuerthner <ralph.wuerthner@de.ibm.com>
* BUG 10106: Honour output buffer length set by the client for SMB2 GetInfo
requests.
CHANGES SINCE 4.1.0rc1
=====================
o Jeremy Allison <jra@samba.org>
* BUG 9992: Windows error 0x800700FE when copying files with xattr names
containing ":".
* BUG 10010: Missing integer wrap protection in EA list reading can cause
server to loop with DOS (CVE-2013-4124).
* BUG 10064: Linux kernel oplock breaks can miss signals.
o Andrew Bartlett <abartlet@samba.org>
* BUG 9029: Fix replication with --domain-crictical-only to fill in
backlinks.
* BUG 9820: Fix crash of winbind after "ls -l
/usr/local/samba/var/locks/sysvol".
* BUG 10056: dsdb improvements.
o Björn Baumbach <bb@sernet.de>
* BUG 10003: Fix segfault while reading incomplete session info.
o Gregor Beck <gbeck@sernet.de>
* BUG 9678: Windows 8 Roaming profiles fail.
o Günther Deschner <gd@samba.org>
* BUG 10043: Allow to change the default location for Kerberos credential
caches.
o Volker Lendecke <vl@samba.org>
* BUG 10013: Fix a 100% loop at shutdown time (smbd).
o Stefan Metzmacher <metze@samba.org>
* BUG 9820: Fix crash of winbind after "ls -l
/usr/local/samba/var/locks/sysvol".
* BUG 10015: Fix/improve debug options.
* BUG 10042: Fix crashes in socket_get_local_addr().
* BUG 10056: dsdb improvements.
o Andreas Schneider <asn@samba.org>
* BUG 9994: Do not delete an existing valid credential cache (s3-winbind).
* BUG 10040: Rename regedit to samba-regedit.
* BUG 10041: Remove obsolete swat manpage and references.
* BUG 10048: nsswitch: Add OPT_KRB5CCNAME to avoid an error message.
o Alexander Werth <alexander.werth@de.ibm.com>
* BUG 10045: Remove a redundant inlined substitution of ACLs.
o Ralph Wuerthner <ralphw@de.ibm.com>
* BUG 10064: Linux kernel oplock breaks can miss signals.
#######################################
Reporting bugs & Development Discussion
#######################################
Please discuss this release on the samba-technical mailing list or by
joining the #samba-technical IRC channel on irc.freenode.net.
If you do report problems then please try to send high quality
feedback. If you don''t provide vital information to help us track down
the problem then you will probably be ignored. All bug reports should
be filed under the Samba 4.1 product in the project''s Bugzilla
database (https://bugzilla.samba.org/).
======================================================================= Our
Code, Our Bugs, Our Responsibility.
== The Samba Team
=====================================================================
===============Download Details
===============
The uncompressed tarballs and patch files have been signed
using GnuPG (ID 6568B7EA). The source code can be downloaded
from:
http://download.samba.org/samba/ftp/stable/
The release notes are available online at:
http://www.samba.org/samba/history/samba-4.1.0.html
Binary packages will be made available on a volunteer basis from
http://download.samba.org/samba/ftp/Binary_Packages/
Our Code, Our Bugs, Our Responsibility.
(https://bugzilla.samba.org/)
--Enjoy
The Samba Team
