I have some problems with GivenScenario, my scenario keeps on failing when I use GivenScenario, like if the database or the session was not in the same state at the beginning of the new scenario as it was at the end of the given one. If I try to group my two scenari in only one big scenario then it passes... Any clue of what I might do wrong there ? you can see here my story : Story: Filling a profile As a user I want to fill a profile So that I can see my score Scenario: Starting a new profile Given a company And a department And 2 questions And a number of replies And the logged in user somone at example.com When the user starts a new profile Then there should be a new profile for this user And there should be a list of remaining questions ( ids stored in the session ) When the user answers a question Then there should be one more answer Then there should be one question less to answer Scenario: Ending a profile GivenScenario: Starting a new profile # if i remove these 2 lines it passes When the user answers a question # fails here because the question which id''s is stored in the session can''t be found Then there should be one more answer Then there should be no more question to answer Then the profile should be set as terminated
On Tue, Mar 25, 2008 at 5:13 AM, Bastien <bastien.vaucher at gmail.com> wrote:> I have some problems with GivenScenario, my scenario keeps on failing > when I use GivenScenario, like if the database or the session was not > in the same state at the beginning of the new scenario as it was at > the end of the given one. If I try to group my two scenari in only one > big scenario then it passes... Any clue of what I might do wrong > there ?Hard to tell from plain text. Can you post the steps definitions?> > you can see here my story : > > Story: Filling a profile > > As a user > I want to fill a profile > So that I can see my score > > Scenario: Starting a new profile > > Given a company > And a department > And 2 questions > And a number of replies > And the logged in user somone at example.com > > When the user starts a new profile > > Then there should be a new profile for this user > And there should be a list of remaining questions ( ids stored in > the session ) > > When the user answers a question > > Then there should be one more answer > Then there should be one question less to answer > > Scenario: Ending a profile > GivenScenario: Starting a new profile # if i remove these 2 lines it > passes > > When the user answers a question # fails here because the question > which id''s is stored in the session can''t be found > > Then there should be one more answer > Then there should be no more question to answer > Then the profile should be set as terminated > _______________________________________________ > rspec-users mailing list > rspec-users at rubyforge.org > http://rubyforge.org/mailman/listinfo/rspec-users >
Of course, here you go :
steps_for(:work_area_execution) do
Given("a company") do
@account = Factory.create_valid_account()
end
Given("$amount questions?") do |amount|
Question.delete_all
category = Factory.create_valid_category
work_area = Factory.create_valid_work_area(category)
amount.to_i.times do
Factory.create_valid_questions(work_area)
end
end
Given("a department") do
@department = Factory.create_valid_department(:account_id =>
@account.id)
end
Given("a number of replies") do
@replies = Reply.find(:all).size
end
Given("the logged in user $email") do |email|
@user = Factory.create_valid_user(:email=>email, :department_id =>
@department.id, :account_id => @account.id)
@user_profiles = Profile.find(:all, :conditions => [''user_id
= ?'', at user.id]).size
host! "company.example.com"
post "sessions",
{:login => email,
:password => "bacon"}
follow_redirect! if redirect?
end
When("the user starts a new profile") do
post person_profiles_path(@user)
follow_redirect! if redirect?
end
When("the user answers a question") do
q = Question.find(session[:current_question]) # doesn''t work with
GivenScenario
w = q.work_area
c = w.category
post profile_question_answers_path(@user.profiles.first, q.id),
{ ''reply[current]'' => 4,
''reply[work_area_id]'' => w.id,
''reply[question_id]'' =>q.id,
''reply[category_id]''=> c.id,
''reply[base]'' => nil, }
follow_redirect! if redirect?
end
Then("there should be a new profile for this user") do
@user.profiles.size.should == @user_profiles + 1
end
Then("there should be a list of remaining questions") do
session[:current_question].should_not == nil
session[:pending_questions].should_not == nil
@remaining_questions = session[:pending_questions].size
end
Then("there should be one question less to answer") do
session[:pending_questions].size.should == @remaining_questions -
1
@remaining_questions = session[:pending_questions].size
end
Then("there should be one more answer") do
Reply.find(:all).size.should == @replies + 1
@replies = Reply.find(:all).size
end
Then("there should be no more question to answer") do
session[:pending_questions].size.should == 0
session[:current_question].should == nil
end
Then("the profile should be set as terminated") do
@user.profiles.first.finished_at.should_not == nil
end
end
Thanks for your time and help.
On Mar 25, 12:07 pm, "David Chelimsky" <dchelim... at gmail.com>
wrote:> On Tue, Mar 25, 2008 at 5:13 AM, Bastien <bastien.vauc... at
gmail.com> wrote:
> > I have some problems with GivenScenario, my scenario keeps on failing
> > when I use GivenScenario, like if the database or the session was not
> > in the same state at the beginning of the new scenario as it was at
> > the end of the given one. If I try to group my two scenari in only
one
> > big scenario then it passes... Any clue of what I might do wrong
> > there ?
>
> Hard to tell from plain text. Can you post the steps definitions?
>
>
>
>
>
> > you can see here my story :
>
> > Story: Filling a profile
>
> > As a user
> > I want to fill a profile
> > So that I can see my score
>
> > Scenario: Starting a new profile
>
> > Given a company
> > And a department
> > And 2 questions
> > And a number of replies
> > And the logged in user som... at example.com
>
> > When the user starts a new profile
>
> > Then there should be a new profile for this user
> > And there should be a list of remaining questions (
ids stored in
> > the session )
>
> > When the user answers a question
>
> > Then there should be one more answer
> > Then there should be one question less to answer
>
> > Scenario: Ending a profile
> > GivenScenario: Starting a new profile # if i remove
these 2 lines it
> > passes
>
> > When the user answers a question # fails here because
the question
> > which id''s is stored in the session can''t be found
>
> > Then there should be one more answer
> > Then there should be no more question to answer
> > Then the profile should be set as terminated
> > _______________________________________________
> > rspec-users mailing list
> > rspec-us... at rubyforge.org
> > http://rubyforge.org/mailman/listinfo/rspec-users
>
> _______________________________________________
> rspec-users mailing list
> rspec-us... at
rubyforge.orghttp://rubyforge.org/mailman/listinfo/rspec-users
On Tue, Mar 25, 2008 at 6:31 AM, Bastien <bastien.vaucher at gmail.com> wrote:> Of course, here you go : > > steps_for(:work_area_execution) do > > Given("a company") do > @account = Factory.create_valid_account() > end > > Given("$amount questions?") do |amount| > Question.delete_all > category = Factory.create_valid_category > work_area = Factory.create_valid_work_area(category) > amount.to_i.times do > Factory.create_valid_questions(work_area) > end > end > > Given("a department") do > @department = Factory.create_valid_department(:account_id => > @account.id) > end > > Given("a number of replies") do > @replies = Reply.find(:all).size > end > > Given("the logged in user $email") do |email| > @user = Factory.create_valid_user(:email=>email, :department_id => > @department.id, :account_id => @account.id) > @user_profiles = Profile.find(:all, :conditions => [''user_id > = ?'', at user.id]).size > host! "company.example.com" > post "sessions", > {:login => email, > :password => "bacon"} > follow_redirect! if redirect? > end > > When("the user starts a new profile") do > post person_profiles_path(@user) > follow_redirect! if redirect? > end > > When("the user answers a question") do > q = Question.find(session[:current_question]) # doesn''t work with > GivenScenario > w = q.work_area > c = w.category > > post profile_question_answers_path(@user.profiles.first, q.id), > { ''reply[current]'' => 4, > ''reply[work_area_id]'' => w.id, > ''reply[question_id]'' =>q.id, > ''reply[category_id]''=> c.id, > ''reply[base]'' => nil, } > follow_redirect! if redirect? > end > > Then("there should be a new profile for this user") do > @user.profiles.size.should == @user_profiles + 1 > end > > Then("there should be a list of remaining questions") do > session[:current_question].should_not == nil > session[:pending_questions].should_not == nil > @remaining_questions = session[:pending_questions].size > end > > Then("there should be one question less to answer") do > session[:pending_questions].size.should == @remaining_questions - > 1 > @remaining_questions = session[:pending_questions].size > end > > Then("there should be one more answer") do > Reply.find(:all).size.should == @replies + 1 > @replies = Reply.find(:all).size > end > > Then("there should be no more question to answer") do > session[:pending_questions].size.should == 0 > session[:current_question].should == nil > end > > Then("the profile should be set as terminated") do > @user.profiles.first.finished_at.should_not == nil > end > > endLooks like GivenScenario gets run in a separate instance of RailsStory (which is derived from ActionController::IntegrationSession) from the rest of the scenario. This would explain why the session gets cleared out. I can tell you that the DB state does NOT get cleared out, but the mechanism is different. I''m not going to have cycles to investigate a solution right away, so would you please submit a ticket at http://rspec.lighthouseapp.com? Thanks, David> > Thanks for your time and help. > > > On Mar 25, 12:07 pm, "David Chelimsky" <dchelim... at gmail.com> wrote: > > > On Tue, Mar 25, 2008 at 5:13 AM, Bastien <bastien.vauc... at gmail.com> wrote: > > > I have some problems with GivenScenario, my scenario keeps on failing > > > when I use GivenScenario, like if the database or the session was not > > > in the same state at the beginning of the new scenario as it was at > > > the end of the given one. If I try to group my two scenari in only one > > > big scenario then it passes... Any clue of what I might do wrong > > > there ? > > > > Hard to tell from plain text. Can you post the steps definitions? > > > > > > > > > > > > > you can see here my story : > > > > > Story: Filling a profile > > > > > As a user > > > I want to fill a profile > > > So that I can see my score > > > > > Scenario: Starting a new profile > > > > > Given a company > > > And a department > > > And 2 questions > > > And a number of replies > > > And the logged in user som... at example.com > > > > > > When the user starts a new profile > > > > > Then there should be a new profile for this user > > > And there should be a list of remaining questions ( ids stored in > > > the session ) > > > > > When the user answers a question > > > > > Then there should be one more answer > > > Then there should be one question less to answer > > > > > Scenario: Ending a profile > > > GivenScenario: Starting a new profile # if i remove these 2 lines it > > > passes > > > > > When the user answers a question # fails here because the question > > > which id''s is stored in the session can''t be found > > > > > Then there should be one more answer > > > Then there should be no more question to answer > > > Then the profile should be set as terminated > > > _______________________________________________ > > > rspec-users mailing list > > > rspec-us... at rubyforge.org > > > > http://rubyforge.org/mailman/listinfo/rspec-users > > > > _______________________________________________ > > rspec-users mailing list > > rspec-us... at rubyforge.orghttp://rubyforge.org/mailman/listinfo/rspec-users > > > _______________________________________________ > rspec-users mailing list > rspec-users at rubyforge.org > http://rubyforge.org/mailman/listinfo/rspec-users >
done : http://rspec.lighthouseapp.com/projects/5645-rspec/tickets/350 Thanks for your great work. On Mar 25, 1:00 pm, "David Chelimsky" <dchelim... at gmail.com> wrote:> On Tue, Mar 25, 2008 at 6:31 AM, Bastien <bastien.vauc... at gmail.com> wrote: > > Of course, here you go : > > > steps_for(:work_area_execution) do > > > Given("a company") do > > @account = Factory.create_valid_account() > > end > > > Given("$amount questions?") do |amount| > > Question.delete_all > > category = Factory.create_valid_category > > work_area = Factory.create_valid_work_area(category) > > amount.to_i.times do > > Factory.create_valid_questions(work_area) > > end > > end > > > Given("a department") do > > @department = Factory.create_valid_department(:account_id => > > @account.id) > > end > > > Given("a number of replies") do > > @replies = Reply.find(:all).size > > end > > > Given("the logged in user $email") do |email| > > @user = Factory.create_valid_user(:email=>email, :department_id => > > @department.id, :account_id => @account.id) > > @user_profiles = Profile.find(:all, :conditions => [''user_id > > = ?'', at user.id]).size > > host! "company.example.com" > > post "sessions", > > {:login => email, > > :password => "bacon"} > > follow_redirect! if redirect? > > end > > > When("the user starts a new profile") do > > post person_profiles_path(@user) > > follow_redirect! if redirect? > > end > > > When("the user answers a question") do > > q = Question.find(session[:current_question]) # doesn''t work with > > GivenScenario > > w = q.work_area > > c = w.category > > > post profile_question_answers_path(@user.profiles.first, q.id), > > { ''reply[current]'' => 4, > > ''reply[work_area_id]'' => w.id, > > ''reply[question_id]'' =>q.id, > > ''reply[category_id]''=> c.id, > > ''reply[base]'' => nil, } > > follow_redirect! if redirect? > > end > > > Then("there should be a new profile for this user") do > > @user.profiles.size.should == @user_profiles + 1 > > end > > > Then("there should be a list of remaining questions") do > > session[:current_question].should_not == nil > > session[:pending_questions].should_not == nil > > @remaining_questions = session[:pending_questions].size > > end > > > Then("there should be one question less to answer") do > > session[:pending_questions].size.should == @remaining_questions - > > 1 > > @remaining_questions = session[:pending_questions].size > > end > > > Then("there should be one more answer") do > > Reply.find(:all).size.should == @replies + 1 > > @replies = Reply.find(:all).size > > end > > > Then("there should be no more question to answer") do > > session[:pending_questions].size.should == 0 > > session[:current_question].should == nil > > end > > > Then("the profile should be set as terminated") do > > @user.profiles.first.finished_at.should_not == nil > > end > > > end > > Looks like GivenScenario gets run in a separate instance of RailsStory > (which is derived from ActionController::IntegrationSession) from the > rest of the scenario. This would explain why the session gets cleared > out. I can tell you that the DB state does NOT get cleared out, but > the mechanism is different. > > I''m not going to have cycles to investigate a solution right away, so > would you please submit a ticket athttp://rspec.lighthouseapp.com? > > Thanks, > David > > > > > > > Thanks for your time and help. > > > On Mar 25, 12:07 pm, "David Chelimsky" <dchelim... at gmail.com> wrote: > > > > On Tue, Mar 25, 2008 at 5:13 AM, Bastien <bastien.vauc... at gmail.com> wrote: > > > > I have some problems with GivenScenario, my scenario keeps on failing > > > > when I use GivenScenario, like if the database or the session was not > > > > in the same state at the beginning of the new scenario as it was at > > > > the end of the given one. If I try to group my two scenari in only one > > > > big scenario then it passes... Any clue of what I might do wrong > > > > there ? > > > > Hard to tell from plain text. Can you post the steps definitions? > > > > > you can see here my story : > > > > > Story: Filling a profile > > > > > As a user > > > > I want to fill a profile > > > > So that I can see my score > > > > > Scenario: Starting a new profile > > > > > Given a company > > > > And a department > > > > And 2 questions > > > > And a number of replies > > > > And the logged in user som... at example.com > > > > > When the user starts a new profile > > > > > Then there should be a new profile for this user > > > > And there should be a list of remaining questions ( ids stored in > > > > the session ) > > > > > When the user answers a question > > > > > Then there should be one more answer > > > > Then there should be one question less to answer > > > > > Scenario: Ending a profile > > > > GivenScenario: Starting a new profile # if i remove these 2 lines it > > > > passes > > > > > When the user answers a question # fails here because the question > > > > which id''s is stored in the session can''t be found > > > > > Then there should be one more answer > > > > Then there should be no more question to answer > > > > Then the profile should be set as terminated > > > > _______________________________________________ > > > > rspec-users mailing list > > > > rspec-us... at rubyforge.org > > > > > http://rubyforge.org/mailman/listinfo/rspec-users > > > > _______________________________________________ > > > rspec-users mailing list > > > rspec-us... at rubyforge.orghttp://rubyforge.org/mailman/listinfo/rspec-users > > > _______________________________________________ > > rspec-users mailing list > > rspec-us... at rubyforge.org > > http://rubyforge.org/mailman/listinfo/rspec-users > > _______________________________________________ > rspec-users mailing list > rspec-us... at rubyforge.orghttp://rubyforge.org/mailman/listinfo/rspec-users