Hi! I've been able to configure and make R (1,4,0 linux) except for the gnome support. I've checked all packages and libs mentioned in R-admin.pdf (and by Luke Tierny) to make sure that I have them and even using the following: ./configure --with-gnome --with-gnome-includes=/opt/gnome/include --with-gnome-libs=/opt/gnome/lib --with-libglade-config=opt/gnome/lib I still get: R is now configured for i686-pc-linux-gnu Source directory: . Installation directory: /usr/local C compiler: gcc -mieee-fp -D__NO_MATH_INLINES -g -O2 C++ compiler: c++ -mieee-fp -g -O2 FORTRAN compiler: g77 -g -O2 X11 support: yes Gnome support: no Tcl/Tk support: yes R profiling support: yes R as a shared library: no I really don't know what else I can do, gnome runs ok on this machine. Should I just give up? There is no way to require that configure tells exactly what's missing? Thanks Dr. Agustin Lobo Instituto de Ciencias de la Tierra (CSIC) Lluis Sole Sabaris s/n 08028 Barcelona SPAIN tel 34 93409 5410 fax 34 93411 0012 alobo at ija.csic.es> On Tue, 22 Jan 2002, Luke Tierney wrote: > > > You don't have tcltk either. SuSE seems to not install devel support > > for things like tcl or gnome even if you specify a devel system. You > > need to install tcl-devel to get tcl support and I think you need at > > least gnome-core-devel libxml-devel libglade-devel esound-devel and > > maybe also gnome-libs-devel to get gnome support. With those > > installed I build successfully on SuSE 7.3, but I don't know what else > > I might have that you do not. > > > > luke > > > > > > > > On Tue, Jan 22, 2002 at 06:16:31PM +0100, Agustin Lobo wrote: > > > > > > I'm the happy user of a new machine and > > > I'm trying to compile R-1.4.0 on it > > > (linux Suse 7.3 box). > > > > > > After > > > ./configure --with-gnome > > > > > > I get the following configuration: > > > > > > R is now configured for i686-pc-linux-gnu > > > > > > Source directory: . > > > Installation directory: /usr/local > > > C compiler: gcc -mieee-fp -D__NO_MATH_INLINES -g -O2 > > > C++ compiler: c++ -mieee-fp -g -O2 > > > FORTRAN compiler: g77 -g -O2 > > > > > > X11 support: yes > > > Gnome support: no > > > Tcl/Tk support: no > > > > > > R profiling support: yes > > > R as a shared library: no > > > > > > configure: warning: you cannot build DVI versions of the R manuals > > > configure: warning: you cannot build PDF versions of the R manuals > > > > > > The warnings are because: > > > checking for dvips...no > > > (same for tex,latex,makeindex,pdftex,pdflatex) > > > but this is not a concern now. I can do it later > > > > > > Instead, I don't get gnome support despite the --with-gnome flag > > > > > > And, worst, this is what I get from make check: > > > > > > linux:/usr/local/R-1.4.0 # make check FORCE=FORCE > > > make[1]: Entering directory `/usr/local/R-1.4.0/tests' > > > make[2]: Entering directory `/usr/local/R-1.4.0/tests' > > > make[3]: Entering directory `/usr/local/R-1.4.0/tests/Examples' > > > make[4]: Entering directory `/usr/local/R-1.4.0/tests/Examples' > > > make[4]: Leaving directory `/usr/local/R-1.4.0/tests/Examples' > > > make[4]: Entering directory `/usr/local/R-1.4.0/tests/Examples' > > > collecting examples for package `base' ... > > > make[5]: Entering directory `/usr/local/R-1.4.0/src/library' > > > /bin/sh: ../../bin/R: No such file or directory > > > /bin/sh: ../../library/base/CONTENTS: No such file or directory > > > cat: ../../library/*/CONTENTS: No such file or directory > > > make[5]: *** [DOCS] Error 1 > > > make[5]: Leaving directory `/usr/local/R-1.4.0/src/library' > > > file ../../library/base/R-ex cannot be opened at > > > ../../share/perl/massage-Examples.pl line 84. > > > make[4]: *** No rule to make target `../../bin/R.bin', needed by > > > `base-Ex.Rout'. Stop. > > > make[4]: Leaving directory `/usr/local/R-1.4.0/tests/Examples' > > > make[3]: *** [test-Examples] Error 2 > > > make[3]: Leaving directory `/usr/local/R-1.4.0/tests/Examples' > > > make[2]: *** [test-Examples] Error 2 > > > make[2]: Leaving directory `/usr/local/R-1.4.0/tests' > > > make[1]: *** [test-all-basics] Error 1 > > > make[1]: Leaving directory `/usr/local/R-1.4.0/tests' > > > make: *** [check] Error 2 > > > > > > What's wrong? I've downloaded the tar file from two diferent mirrors > > > with identical results. > > > > > > Agus > > > > > > Dr. Agustin Lobo > > > Instituto de Ciencias de la Tierra (CSIC) > > > Lluis Sole Sabaris s/n > > > 08028 Barcelona SPAIN > > > tel 34 93409 5410 > > > fax 34 93411 0012 > > > alobo at ija.csic.es > > > > > > > > > > > > > > > -.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.- > > > r-help mailing list -- Read http://www.ci.tuwien.ac.at/~hornik/R/R-FAQ.html > > > Send "info", "help", or "[un]subscribe" > > > (in the "body", not the subject !) To: r-help-request at stat.math.ethz.ch > > > _._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._ > > > > -- > > Luke Tierney > > University of Minnesota Phone: 612-625-7843 > > School of Statistics Fax: 612-624-8868 > > 313 Ford Hall, 224 Church St. S.E. email: luke at stat.umn.edu > > Minneapolis, MN 55455 USA WWW: http://www.stat.umn.edu > > > >-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.- r-help mailing list -- Read http://www.ci.tuwien.ac.at/~hornik/R/R-FAQ.html Send "info", "help", or "[un]subscribe" (in the "body", not the subject !) To: r-help-request at stat.math.ethz.ch _._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._
Agustin Lobo <alobo at ija.csic.es> writes:> Hi! > > I've been able to configure and make R (1,4,0 linux) > except for the gnome support. I've checked all packages and libs mentioned > in R-admin.pdf (and by Luke Tierny) to make sure that I have them and even > using the following: > > ./configure --with-gnome --with-gnome-includes=/opt/gnome/include > --with-gnome-libs=/opt/gnome/lib --with-libglade-config=opt/gnome/lib!! Was that as typed? That might explain things.> > I still get: > > R is now configured for i686-pc-linux-gnu > Source directory: . > Installation directory: /usr/local > C compiler: gcc -mieee-fp -D__NO_MATH_INLINES -g -O2 > C++ compiler: c++ -mieee-fp -g -O2 > FORTRAN compiler: g77 -g -O2 > X11 support: yes > Gnome support: no > Tcl/Tk support: yes > R profiling support: yes > R as a shared library: no > > I really don't know what else I can do, gnome runs ok on this machine. > > Should I just give up? There is no way to require that configure tells > exactly what's missing?Somewhere in the output from configure there should be a line saying which test is failing, and config.log has the details. Don't forget to remove config.cache, btw. -- O__ ---- Peter Dalgaard Blegdamsvej 3 c/ /'_ --- Dept. of Biostatistics 2200 Cph. N (*) \(*) -- University of Copenhagen Denmark Ph: (+45) 35327918 ~~~~~~~~~~ - (p.dalgaard at biostat.ku.dk) FAX: (+45) 35327907 -.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.- r-help mailing list -- Read http://www.ci.tuwien.ac.at/~hornik/R/R-FAQ.html Send "info", "help", or "[un]subscribe" (in the "body", not the subject !) To: r-help-request at stat.math.ethz.ch _._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._
I was able to configure on SuSE 7.3 with just ./configure --with-gnome so I would guess that you don't have all the devel rpm's you need yet. Look at config.log and see if that helps; remove the cache before you re-run configure just to be sure; and save or pipe configure's output so you can look at it and see if that helps. If you're seeing a problem with glade, check if you have /usr/bin/libglade-config; if you don't you need the libglade-devel rpm. If that doesn't help I can send you a list of the rpm's that are installed on my box and you can compare to yours and look for likely suspects. luke On Thu, Jan 24, 2002 at 12:04:54PM +0100, Agustin Lobo wrote:> > Hi! > > I've been able to configure and make R (1,4,0 linux) > except for the gnome support. I've checked all packages and libs mentioned > in R-admin.pdf (and by Luke Tierny) to make sure that I have them and even > using the following: > > ./configure --with-gnome --with-gnome-includes=/opt/gnome/include > --with-gnome-libs=/opt/gnome/lib --with-libglade-config=opt/gnome/lib > > I still get: > > R is now configured for i686-pc-linux-gnu > Source directory: . > Installation directory: /usr/local > C compiler: gcc -mieee-fp -D__NO_MATH_INLINES -g -O2 > C++ compiler: c++ -mieee-fp -g -O2 > FORTRAN compiler: g77 -g -O2 > X11 support: yes > Gnome support: no > Tcl/Tk support: yes > R profiling support: yes > R as a shared library: no > > I really don't know what else I can do, gnome runs ok on this machine. > > Should I just give up? There is no way to require that configure tells > exactly what's missing? > > Thanks > > Dr. Agustin Lobo > Instituto de Ciencias de la Tierra (CSIC) > Lluis Sole Sabaris s/n > 08028 Barcelona SPAIN > tel 34 93409 5410 > fax 34 93411 0012 > alobo at ija.csic.es > > > > On Tue, 22 Jan 2002, Luke Tierney wrote: > > > > > You don't have tcltk either. SuSE seems to not install devel support > > > for things like tcl or gnome even if you specify a devel system. You > > > need to install tcl-devel to get tcl support and I think you need at > > > least gnome-core-devel libxml-devel libglade-devel esound-devel and > > > maybe also gnome-libs-devel to get gnome support. With those > > > installed I build successfully on SuSE 7.3, but I don't know what else > > > I might have that you do not. > > > > > > luke > > > > > > > > > > > > On Tue, Jan 22, 2002 at 06:16:31PM +0100, Agustin Lobo wrote: > > > > > > > > I'm the happy user of a new machine and > > > > I'm trying to compile R-1.4.0 on it > > > > (linux Suse 7.3 box). > > > > > > > > After > > > > ./configure --with-gnome > > > > > > > > I get the following configuration: > > > > > > > > R is now configured for i686-pc-linux-gnu > > > > > > > > Source directory: . > > > > Installation directory: /usr/local > > > > C compiler: gcc -mieee-fp -D__NO_MATH_INLINES -g -O2 > > > > C++ compiler: c++ -mieee-fp -g -O2 > > > > FORTRAN compiler: g77 -g -O2 > > > > > > > > X11 support: yes > > > > Gnome support: no > > > > Tcl/Tk support: no > > > > > > > > R profiling support: yes > > > > R as a shared library: no > > > > > > > > configure: warning: you cannot build DVI versions of the R manuals > > > > configure: warning: you cannot build PDF versions of the R manuals > > > > > > > > The warnings are because: > > > > checking for dvips...no > > > > (same for tex,latex,makeindex,pdftex,pdflatex) > > > > but this is not a concern now. I can do it later > > > > > > > > Instead, I don't get gnome support despite the --with-gnome flag > > > > > > > > And, worst, this is what I get from make check: > > > > > > > > linux:/usr/local/R-1.4.0 # make check FORCE=FORCE > > > > make[1]: Entering directory `/usr/local/R-1.4.0/tests' > > > > make[2]: Entering directory `/usr/local/R-1.4.0/tests' > > > > make[3]: Entering directory `/usr/local/R-1.4.0/tests/Examples' > > > > make[4]: Entering directory `/usr/local/R-1.4.0/tests/Examples' > > > > make[4]: Leaving directory `/usr/local/R-1.4.0/tests/Examples' > > > > make[4]: Entering directory `/usr/local/R-1.4.0/tests/Examples' > > > > collecting examples for package `base' ... > > > > make[5]: Entering directory `/usr/local/R-1.4.0/src/library' > > > > /bin/sh: ../../bin/R: No such file or directory > > > > /bin/sh: ../../library/base/CONTENTS: No such file or directory > > > > cat: ../../library/*/CONTENTS: No such file or directory > > > > make[5]: *** [DOCS] Error 1 > > > > make[5]: Leaving directory `/usr/local/R-1.4.0/src/library' > > > > file ../../library/base/R-ex cannot be opened at > > > > ../../share/perl/massage-Examples.pl line 84. > > > > make[4]: *** No rule to make target `../../bin/R.bin', needed by > > > > `base-Ex.Rout'. Stop. > > > > make[4]: Leaving directory `/usr/local/R-1.4.0/tests/Examples' > > > > make[3]: *** [test-Examples] Error 2 > > > > make[3]: Leaving directory `/usr/local/R-1.4.0/tests/Examples' > > > > make[2]: *** [test-Examples] Error 2 > > > > make[2]: Leaving directory `/usr/local/R-1.4.0/tests' > > > > make[1]: *** [test-all-basics] Error 1 > > > > make[1]: Leaving directory `/usr/local/R-1.4.0/tests' > > > > make: *** [check] Error 2 > > > > > > > > What's wrong? I've downloaded the tar file from two diferent mirrors > > > > with identical results. > > > > > > > > Agus > > > > > > > > Dr. Agustin Lobo > > > > Instituto de Ciencias de la Tierra (CSIC) > > > > Lluis Sole Sabaris s/n > > > > 08028 Barcelona SPAIN > > > > tel 34 93409 5410 > > > > fax 34 93411 0012 > > > > alobo at ija.csic.es > > > > > > > > > > > > > > > > > > > > -.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.- > > > > r-help mailing list -- Read http://www.ci.tuwien.ac.at/~hornik/R/R-FAQ.html > > > > Send "info", "help", or "[un]subscribe" > > > > (in the "body", not the subject !) To: r-help-request at stat.math.ethz.ch > > > > _._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._ > > > > > > -- > > > Luke Tierney > > > University of Minnesota Phone: 612-625-7843 > > > School of Statistics Fax: 612-624-8868 > > > 313 Ford Hall, 224 Church St. S.E. email: luke at stat.umn.edu > > > Minneapolis, MN 55455 USA WWW: http://www.stat.umn.edu > > > > > > > > >-- Luke Tierney University of Minnesota Phone: 612-625-7843 School of Statistics Fax: 612-624-8868 313 Ford Hall, 224 Church St. S.E. email: luke at stat.umn.edu Minneapolis, MN 55455 USA WWW: http://www.stat.umn.edu -.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.- r-help mailing list -- Read http://www.ci.tuwien.ac.at/~hornik/R/R-FAQ.html Send "info", "help", or "[un]subscribe" (in the "body", not the subject !) To: r-help-request at stat.math.ethz.ch _._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._