HOgg 0.4.1 Released
-------------------
The HOgg package provides a commandline tool for manipulating Ogg files,
and a corresponding Haskell library. HOgg is in hackage, or on the web at:
http://www.kfish.org/~conrad/software/hogg/
This is the fourth public release. The focus is on correctness of Ogg
parsing, production and editing. The capabilities of the hogg commandline
tool are roughly on par with those of the oggz* [0] tools.
HOgg supports chained and multiplexed Ogg bitstreams conformant with
RFC3533[1]. HOgg can parse headers for CELT, CMML, FLAC, OggPCM, Speex, Theora
and Vorbis media codecs, and can read and write Ogg Skeleton bitstreams.
[0] Oggz: http://www.annodex.net/software/liboggz/index.html
[1] RFC3533: http://www.ietf.org/rfc/rfc3533.txt
New in this release
-------------------
This release is updated for Hackage, the Haskell source packaging system.
The hogg tool contains a new subcommand for generating man pages, "hogg
man".
Additionally, an autogenerated version of the main hogg man page (hogg.1)
is distributed with the source tarball.
Hackage Installation
--------------------
HOgg is in Hackage, at:
http://hackage.haskell.org/cgi-bin/hackage-scripts/package/hogg-0.4.1
If you have the Hackage "cabal" system installed, simply run:
$ cabal update
$ cabal install hogg
Source Tarball Installation
---------------------------
I am very interested in hearing about problems with building or installing
the package, particularly from people who are not yet familiar with building
from Haskell source. You need ghc instead of gcc; it compiles to a binary:
$ cabal configure
$ cabal build
$ cabal install
(A ./Setup.hs is also included, which may be used in place of the
"cabal"
command if that not present).
Building of this release has been tested with:
* GHC version 6.8.2 [2]
* The Haskell build system "Cabal" version 1.6.0.1 [3]
The GHC and Cabal versions listed above span the packages available in most
current distributions. I've tested on Debian unstable and Ubuntu 8.10.
I'm
particularly interested to hear reports of build success or failure on other
distributions or operating systems.
[2] GHC: http://www.haskell.org/ghc/
[3] Cabal: http://www.haskell.org/cabal/
Usage
-----
$ hogg help
Usage: hogg <subcommand> [options] filename ...
hogg is a commandline tool for manipulating Ogg files. It supports chained
and multiplexed files conformant with RFC3533. Hogg can parse headers for
CELT, CMML, FLAC, PCM, Speex, Theora and Vorbis, and can read and write Ogg
Skeleton logical bitstreams.
Commands:
help Display help for a specific subcommand (eg. "hogg help
chop")
man Generate Unix man page for a specific subcommand (eg.
"hogg man chop")
Reporting:
info Display information about the specified files and
their bitstreams
dump Hexdump packets of an Ogg file
pagedump Display page structure of an Ogg file
dumpraw Dump raw (unparsed) page data
Extraction:
rip Rip selected logical bistreams from an Ogg file (default: all)
reconstruct Reconstruct an Ogg file by doing a full packet demux
Editing:
chop Extract a section (specify start and/or end time)
merge Merge, interleaving pages in order of presentation time
sort Rewrite with correct page ordering
addskel Write a Skeleton logical bitstream
Miscellaneous:
known-codecs List codecs known by this version of hogg
Please report bugs to <ogg-dev at xiph.org>
New subcommand man
------------------
$ hogg help man
man: Generate Unix man page for a specific subcommand (eg. "hogg man
chop")
Usage: hogg man [options]
Examples:
Generate a man page for the "hogg chop" subcommand:
hogg man chop
Options:
-h, -? --help Display this help and exit
-V --version Output version information and exit
$ hogg man man
.TH HOGG 1 "December 2008" "hogg" "Annodex"
.SH SYNOPSIS
.B hogg
.RI man
...
Source
------
Source code is available from the darcs repository at:
darcs get http://www.kfish.org/~conrad/software/hogg/
Tarballs are available from:
http://www.kfish.org/~conrad/software/hogg/
cheers,
Conrad.
Here's some instructions for installing hogg on a current Ubuntu 8.10 (or Debian unstable? testing?) system, ie. if you don't already have haskell's cabal system installed: $ sudo apt-get install ghc6 $ wget http://hackage.haskell.org/packages/archive/cabal-install/0.6.0/cabal-install-0.6.0.tar.gz $ tar zxf cabal-install-0.6.0.tar.gz $ cd cabal-install-0.6.0 $ ./bootstrap.sh $ cabal update $ cabal install hogg This is from memory; please correct if any extra/fewer steps are needed :-) Conrad. 2008/12/23 Conrad Parker <conrad at metadecks.org>:> HOgg 0.4.1 Released > ------------------- > > The HOgg package provides a commandline tool for manipulating Ogg files, > and a corresponding Haskell library. HOgg is in hackage, or on the web at: > > http://www.kfish.org/~conrad/software/hogg/ > > This is the fourth public release. The focus is on correctness of Ogg > parsing, production and editing. The capabilities of the hogg commandline > tool are roughly on par with those of the oggz* [0] tools. > > HOgg supports chained and multiplexed Ogg bitstreams conformant with > RFC3533[1]. HOgg can parse headers for CELT, CMML, FLAC, OggPCM, Speex, Theora > and Vorbis media codecs, and can read and write Ogg Skeleton bitstreams. > > [0] Oggz: http://www.annodex.net/software/liboggz/index.html > [1] RFC3533: http://www.ietf.org/rfc/rfc3533.txt > > > New in this release > ------------------- > > This release is updated for Hackage, the Haskell source packaging system. > > The hogg tool contains a new subcommand for generating man pages, "hogg man". > Additionally, an autogenerated version of the main hogg man page (hogg.1) > is distributed with the source tarball. > > Hackage Installation > -------------------- > > HOgg is in Hackage, at: > http://hackage.haskell.org/cgi-bin/hackage-scripts/package/hogg-0.4.1 > > If you have the Hackage "cabal" system installed, simply run: > > $ cabal update > $ cabal install hogg > > Source Tarball Installation > --------------------------- > > I am very interested in hearing about problems with building or installing > the package, particularly from people who are not yet familiar with building > from Haskell source. You need ghc instead of gcc; it compiles to a binary: > > $ cabal configure > $ cabal build > $ cabal install > > (A ./Setup.hs is also included, which may be used in place of the "cabal" > command if that not present). > > Building of this release has been tested with: > * GHC version 6.8.2 [2] > * The Haskell build system "Cabal" version 1.6.0.1 [3] > > The GHC and Cabal versions listed above span the packages available in most > current distributions. I've tested on Debian unstable and Ubuntu 8.10. I'm > particularly interested to hear reports of build success or failure on other > distributions or operating systems. > > [2] GHC: http://www.haskell.org/ghc/ > [3] Cabal: http://www.haskell.org/cabal/ > > > Usage > ----- > > $ hogg help > Usage: hogg <subcommand> [options] filename ... > > hogg is a commandline tool for manipulating Ogg files. It supports chained > and multiplexed files conformant with RFC3533. Hogg can parse headers for > CELT, CMML, FLAC, PCM, Speex, Theora and Vorbis, and can read and write Ogg > Skeleton logical bitstreams. > > Commands: > help Display help for a specific subcommand (eg. "hogg help chop") > man Generate Unix man page for a specific subcommand (eg. > "hogg man chop") > > Reporting: > info Display information about the specified files and > their bitstreams > dump Hexdump packets of an Ogg file > pagedump Display page structure of an Ogg file > dumpraw Dump raw (unparsed) page data > > Extraction: > rip Rip selected logical bistreams from an Ogg file (default: all) > reconstruct Reconstruct an Ogg file by doing a full packet demux > > Editing: > chop Extract a section (specify start and/or end time) > merge Merge, interleaving pages in order of presentation time > sort Rewrite with correct page ordering > addskel Write a Skeleton logical bitstream > > Miscellaneous: > known-codecs List codecs known by this version of hogg > > Please report bugs to <ogg-dev at xiph.org> > > > New subcommand man > ------------------ > > $ hogg help man > man: Generate Unix man page for a specific subcommand (eg. "hogg man chop") > Usage: hogg man [options] > > Examples: > Generate a man page for the "hogg chop" subcommand: > hogg man chop > > Options: > -h, -? --help Display this help and exit > -V --version Output version information and exit > > $ hogg man man > .TH HOGG 1 "December 2008" "hogg" "Annodex" > .SH SYNOPSIS > > .B hogg > .RI man > ... > > > Source > ------ > > Source code is available from the darcs repository at: > > darcs get http://www.kfish.org/~conrad/software/hogg/ > > Tarballs are available from: > > http://www.kfish.org/~conrad/software/hogg/ > > cheers, > > Conrad. >
Conrad Parker wrote:> Here's some instructions for installing hogg on a current Ubuntu 8.10 > (or Debian unstable? testing?) system, ie. if you don't already have > haskell's cabal system installed: > > $ sudo apt-get install ghc6 > $ wget http://hackage.haskell.org/packages/archive/cabal-install/0.6.0/cabal-install-0.6.0.tar.gz > $ tar zxf cabal-install-0.6.0.tar.gz > $ cd cabal-install-0.6.0 > $ ./bootstrap.shThat should be: sh bootstrop.sh Erik -- ----------------------------------------------------------------- Erik de Castro Lopo ----------------------------------------------------------------- "I'm not even an atheist so much as I am an antitheist; I not only maintain that all religions are versions of the same untruth, but I hold that the influence of churches, and the effect of religious belief, is positively harmful." -- Christopher Hitchens in "Letters to a Young Contrarian" 2001