Nut upsuser - Aug 2020 - Synology NAS is shutting down Ubuntu servers after very brief power outage (fwd)

Larry,

I have not edited a single file, including anything to do with NUT, on the
Synology via ssh.... ever. How is yours configured in the UI? Do you have it set
to go into safe mode after a certain number minutes?

Earlier, I was just copying and pasting the contents of some files to Roger but
did not change anything.

--
Todd Benivegna // todd at benivegna.com
On Aug 14, 2020, 8:16 AM -0400, Larry Fahnoe <fahnoe at fahnoetech.com>,
wrote:
> On Thu, Aug 13, 2020 at 7:46 PM Todd Benivegna <todd at
benivegna.com> wrote:
> > > So I finally got a test in after I changed my RPi to the master
and everything else (including my Synology) to slaves.  Before I did that
though, I timed the shutdown of my Synology since it is the slowest slave to
shutdown.  It took 40 seconds to shutdown, so I changed HOSTSYNC in upsmon.conf
on the master (“Proton”) to 60.  I then did a test ("sudo upsmon -c fsd”).
The slaves shutdown, then eventually the master, but the Synology never powered
down and the UPS powered off which cut the power to it while it was still
on.  Anyone know what the heck is going on?  I’m feeling a bit cursed, haha.
>
> I wonder if as a result of the tinkering and testing something has gotten
mucked up in your Synology's config...perhaps in the config files you were
editing? I wonder this because with a stock Synology UPS configuration as a NUT
client to my RaspberryPi NUT server, my Synology does power off properly. I do
not know if there is a way to restore the Synology's UPS config files to the
default configuration, though that might be a worthwhile endeavor for your NAS.
>
> --Larry
>
> --
> Larry Fahnoe, Fahnoe Technology Consulting, fahnoe at FahnoeTech.com
>            Minneapolis, Minnesota       www.FahnoeTech.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20200814/31001956/attachment-0001.html>

On Fri, Aug 14, 2020 at 10:31 AM Todd Benivegna <todd at benivegna.com>
wrote:
> I have not edited a single file, including anything to do with NUT, on the
> Synology via ssh.... ever. How is yours configured in the UI? Do you have
> it set to go into safe mode after a certain number minutes?
>
Hi Todd,

I misunderstood (have only been casually reading this thread), I thought
you had been editing files on the Synology, but good to know that it is
still stock. I do not have access to my Synology appliances (away on
travel) so I can't give you an accurate answer on how I have it configured.
I will let you know in a few days (once I have access to them again).

--Larry

-- 
Larry Fahnoe, Fahnoe Technology Consulting, fahnoe at FahnoeTech.com
           Minneapolis, Minnesota       www.FahnoeTech.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20200814/66276b29/attachment.html>

Thanks Larry, no problem. I appreciate the input. Whenever you get a chance I’d
really like to compare notes with someone who has NUT and a Synology to see why
the heck mine doesn’t work! ;). I’m also using my Pi as the master like you.
Thanks.

Todd

--
Todd Benivegna // todd at benivegna.com
On Aug 14, 2020, 11:55 AM -0400, Larry Fahnoe <fahnoe at fahnoetech.com>,
wrote:
> On Fri, Aug 14, 2020 at 10:31 AM Todd Benivegna <todd at
benivegna.com> wrote:
> > > I have not edited a single file, including anything to do with
NUT, on the Synology via ssh.... ever. How is yours configured in the UI? Do you
have it set to go into safe mode after a certain number minutes?
>
> Hi Todd,
>
> I misunderstood (have only been casually reading this thread), I thought
you had been editing files on the Synology, but good to know that it is still
stock. I do not have access to my Synology appliances (away on travel) so I
can't give you an accurate answer on how I have it configured. I will let
you know in a few days (once I have access to them again).
>
> --Larry
>
> --
> Larry Fahnoe, Fahnoe Technology Consulting, fahnoe at FahnoeTech.com
>            Minneapolis, Minnesota       www.FahnoeTech.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20200814/af05556c/attachment.html>