Zdenek Paclik
2018-Oct-09 10:15 UTC
[Nut-upsuser] NUT driver usbhid-ups for EATON 5E650iUSB does not work on CENTOS 6.1
OS name and version, *CentOS release 6.10 (Final) Linux 2.6.32-754.3.5.el6.centos.plus.x86_64 #1 SMP Wed Aug 15 02:28:38 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux* exact NUT version Name : nut Arch : x86_64 Version : 2.6.5 Release : 2.el6 Size : 4.2 M Repo : installed>From repo : epelSummary : Network UPS Tools URL : http://www.networkupstools.org/ usbhid-ups --version *Network UPS Tools - Generic HID driver 0.37 (2.6.5)* NUT installation method: from source tarball, package or Subversion, *Installation from package * yum install nut exact device name and related information (manufacturing date, web pointers, …), *EATON 5E650iUSB MFG P/N: 9C00-43348 Ver:00, Bar code: P462H31DN9* complete problem description, with any relevant traces, like system log excerpts, and driver debug output. You can obtain the latter using the following command, as root and after having stopped NUT: *When I try to load driver for eaton device I am not successful. You can see result of debug messages below. The same device I tried on Xubuntu distro and it worked properly. However I even triedcompile binary from git resources on my Centos distro. I was able to run last version nevertheless the result looked the same. * //sbin/usbhid-ups -DDDD -u root -a eaton Network UPS Tools - Generic HID driver 0.37 (2.6.5) USB communication driver 0.31 0.000000 debug level is '4' 0.001138 upsdrv_initups... 0.001456 Checking device (0458/003A) (001/062) 0.003549 - VendorID: 0458 0.003558 - ProductID: 003a 0.003562 - Manufacturer: Genius 0.003566 - Product: Optical Mouse 0.003570 - Serial Number: unknown 0.003574 - Bus: 001 0.003578 Trying to match device 0.003593 Device does not match - skipping 0.003601 Checking device (0463/FFFF) (001/041) 0.004551 - VendorID: 0463 0.004560 - ProductID: ffff 0.004564 - Manufacturer: unknown 0.004568 - Product: unknown 0.004572 - Serial Number: unknown 0.004576 - Bus: 001 0.004579 Trying to match device 0.004584 Device matches 0.005551 Unable to get HID descriptor (error sending control message: Broken pipe) 0.005560 i=0, extra[i]=09, extra[i+1]=21 0.005567 HID descriptor, method 2: (9 bytes) => 09 21 10 01 21 01 22 25 02 0.005572 HID descriptor length 549 0.006046 Unable to get Report descriptor: Broken pipe 0.006066 Checking device (040B/2000) (001/003) 0.010033 - VendorID: 040b 0.010042 - ProductID: 2000 0.010046 - Manufacturer: Generic 0.010050 - Product: USB Keyboard 0.010054 - Serial Number: unknown 0.010058 - Bus: 001 0.010061 Trying to match device 0.010066 Device does not match - skipping 0.010073 Checking device (8087/0024) (001/002) 0.010086 - VendorID: 8087 0.010090 - ProductID: 0024 0.010094 - Manufacturer: unknown 0.010097 - Product: unknown 0.010101 - Serial Number: unknown 0.010104 - Bus: 001 0.010107 Trying to match device 0.010111 Device does not match - skipping 0.010116 Checking device (1D6B/0002) (001/001) 0.010136 - VendorID: 1d6b 0.010140 - ProductID: 0002 0.010143 - Manufacturer: Linux 2.6.32-754.3.5.el6.centos.plus.x86_64 ehci_hcd 0.010147 - Product: EHCI Host Controller 0.010150 - Serial Number: 0000:00:1a.0 0.010154 - Bus: 001 0.010157 Trying to match device 0.010161 Device does not match - skipping 0.010165 No appropriate HID device found 0.010169 No matching HID UPS found lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 040b:2000 Weltrend Semiconductor Bus 001 Device 023: ID 0463:ffff MGE UPS Systems UPS Bus 001 Device 025: ID 0458:003a KYE Systems Corp. (Mouse Systems) NetScroll+ Mini Traveler / Genius NetScroll 120 after conecting USB cable usb-devices | grep -A 3 -B 3 EATON T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 29 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0463 ProdID=ffff Rev=00.01 S: Manufacturer=EATON S: Product=5E C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=20mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid after calling usbhi-ups usb-devices | grep -A 3 -B 3 EATON T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 23 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0463 ProdID=ffff Rev=00.01 S: Manufacturer=EATON S: Product=5E C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=20mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=(none) dmeg # after inserting usb cabel usb 1-1.2: new low speed USB device number 41 using ehci_hcd usb 1-1.2: New USB device found, idVendor=0463, idProduct=ffff usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.2: Product: 5E usb 1-1.2: Manufacturer: EATON usb 1-1.2: configuration #1 chosen from 1 choice dmesg #after command /sbin/usbhid-ups -DDDD -u nut -a eaton drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed generic-usb 0003:0463:FFFF.16BC: timeout initializing reports generic-usb 0003:0463:FFFF.16BC: hiddev96,hidraw3: USB HID v1.10 Device [EATON 5E] on usb-0000:00:1a.0-1.2/input0 usb 1-1.5: USB disconnect, device number 40 usb 1-1.5: new low speed USB device number 42 using ehci_hcd usb 1-1.5: New USB device found, idVendor=0458, idProduct=003a usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.5: Product: Optical Mouse usb 1-1.5: Manufacturer: Genius usb 1-1.5: configuration #1 chosen from 1 choice input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input5796 generic-usb 0003:0458:003A.16BD: input,hidraw2: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1a.0-1.5/input0 usb 1-1.5: USB disconnect, device number 42 usb 1-1.5: new low speed USB device number 43 using ehci_hcd usb 1-1.2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 128 rq 6 len 255 ret -110 usb 1-1.5: New USB device found, idVendor=0458, idProduct=003a usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.5: Product: Optical Mouse usb 1-1.5: Manufacturer: Genius usb 1-1.5: configuration #1 chosen from 1 choice input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input5797 generic-usb 0003:0458:003A.16BE: input,hidraw2: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1a.0-1.5/input0 cat /etc/udev/rules.d/92-nut-eaton.rules ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="0463", ATTR{idProduct}=="ffff", MODE="0666", GROUP="nut" lsusb |grep UPS Bus 001 Device 041: ID 0463:ffff MGE UPS Systems UPS ls -al /dev/bus/usb/001/041 crw-rw-rw-. 1 root nut 189, 40 9. říj 11.45 /dev/bus/usb/001/041 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20181009/79aafbb5/attachment.html>