Nut upsuser - May 2016 - cyberpower ups need to manully turn on the switch

Hi

I have CP825AVR-G UPS.  sometimes the UPS is shutdown due to whatever
reason.

But the annoying thing is even if the electrical power is back, that UPS
will continue to beep, and I have to manually turn on the switch button in
order for it to supply the load/power.

I am wondering if there is any setting in the UPS I need to config? I just
want the UPS to supply the power when the main electrical power is back.

here is the output of the upsc command for that UPS.

#   upsc cyberpower
battery.charge: 77
battery.charge.low: 10
battery.charge.warning: 20
battery.mfr.date: CPS
battery.runtime: 519
battery.runtime.low: 300
battery.type: PbAcid
battery.voltage: 8.5
battery.voltage.nominal: 12
device.mfr: CPS
device.model: CP825AVR-G
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.vendorid: 0764
driver.version: 2.6.5
driver.version.data: CyberPower HID 0.3
driver.version.internal: 0.37
input.transfer.high: 140
input.transfer.low: 90
input.voltage: 121.0
input.voltage.nominal: 120
output.voltage: 121.0
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.delay.start: 30
ups.load: 40
ups.mfr: CPS
ups.model: CP825AVR-G
ups.productid: 0501
ups.realpower.nominal: 450
ups.status: OL CHRG
ups.timer.shutdown: -1
ups.timer.start: 0
ups.vendorid: 0764
-- 


thanks

min
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20160507/b71f1e1d/attachment.html>

On Sat, 7 May 2016, Min Wang wrote:
> Hi? I have?CP825AVR-G UPS. ?sometimes the UPS is shutdown due to 
> whatever reason.?
> 
> But the annoying thing is even if the electrical power is back, that UPS 
> will continue to beep, and I have to manually turn on the switch button 
> in order for it to supply the load/power.
> 
> I am wondering if there is any setting in the UPS I need to config? I 
> just want the UPS to supply the power when the main electrical power is 
> back.
It sounds as if you are not sending a delayed command to the UPS to turn 
it off.  Are you using a GNU/Linux distribution with systemd?  Which 
version of nut are you using? Do you have 
/usr/lib/systemd/system-shutdown/nutshutdown enabled?

Roger

Hi

I am using centos 6.3, and nut-2.6.5-2.el6.x86_64.

could you explain why not sending "a delayed command to the UPS to turn it
off" may cause that issue?

I saw:

ups.delay.shutdown: 20
ups.delay.start: 30

is it something related?

thanks


min


On Sat, May 7, 2016 at 3:44 PM, Roger Price <roger at rogerprice.org>
wrote:
> On Sat, 7 May 2016, Min Wang wrote:
>
> Hi  I have CP825AVR-G UPS.  sometimes the UPS is shutdown due to whatever
>> reason.
>>
>> But the annoying thing is even if the electrical power is back, that
UPS
>> will continue to beep, and I have to manually turn on the switch button
in
>> order for it to supply the load/power.
>>
>> I am wondering if there is any setting in the UPS I need to config? I
>> just want the UPS to supply the power when the main electrical power is
>> back.
>>
>
> It sounds as if you are not sending a delayed command to the UPS to turn
> it off.  Are you using a GNU/Linux distribution with systemd?  Which
> version of nut are you using? Do you have
> /usr/lib/systemd/system-shutdown/nutshutdown enabled?
>
> Roger
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20160507/0c58c0fb/attachment.html>