thr3ads.net - Nut upsuser - [Nut-upsuser] Contact-closure UPS [Nov 2015]

If this information is useful, please help other people find it:
Share via:

Róbert SZAKSZ

2015-Nov-20 17:17 UTC

[Nut-upsuser] Contact-closure UPS

No progress has been made:

cable is UPS - PC
6 - 3
7 - 5
9 - 2

for ./blazer_ser -DDDDD -a infosec
   0.000000     send_to_all: SETINFO driver.parameter.port
"/dev/ttyS1"
   0.000323     debug level is '5'
   0.103068     send_to_all: SETINFO device.type "ups"
   0.103104     send_to_all: SETINFO driver.version "2.7.3"
   0.103118     send_to_all: SETINFO driver.version.internal "1.56"
   0.103131     send_to_all: SETINFO driver.name "blazer_ser"
   0.103141     Trying megatec protocol...
   0.103687     send: 'Q1'
   1.105456     read: timeout
   1.105823     blazer_status: short reply
   1.106058     Status read 1 failed
   1.106825     send: 'Q1'
   2.108171     read: timeout
   2.108295     blazer_status: short reply
   2.108338     Status read 2 failed
   2.108638     send: 'Q1'
   3.109987     read: timeout
   3.110242     blazer_status: short reply
   3.110349     Status read 3 failed
   3.110509     Trying mustek protocol...
   3.111206     send: 'QS'
   4.112808     read: timeout
   4.113098     blazer_status: short reply
   4.113206     Status read 1 failed
   4.113868     send: 'QS'
   5.115398     read: timeout
   5.115631     blazer_status: short reply
   5.115736     Status read 2 failed
   5.116453     send: 'QS'
   6.117979     read: timeout
   6.118322     blazer_status: short reply
   6.118510     Status read 3 failed
   6.118690     Trying megatec/old protocol...
   6.119361     send: 'D'
   7.120701     read: timeout
   7.120934     blazer_status: short reply
   7.121038     Status read 1 failed
   7.121725     send: 'D'
   8.123137     read: timeout
   8.123400     blazer_status: short reply
   8.123503     Status read 2 failed
   8.124140     send: 'D'
   9.125620     read: timeout
   9.125659     blazer_status: short reply
   9.125670     Status read 3 failed
   9.125680     Trying zinto protocol...
   9.126280     send: 'Q1'
  10.127596     read: timeout
  10.127641     blazer_status: short reply
  10.127653     Status read 1 failed
  10.128204     send: 'Q1'
  11.129560     read: timeout
  11.129596     blazer_status: short reply
  11.129608     Status read 2 failed
  11.130162     send: 'Q1'
  12.131519     read: timeout
  12.131556     blazer_status: short reply
  12.131568     Status read 3 failed
  12.131578     No supported UPS detected

for ./nutdrv_qx -DDDDD -a infosec
   0.000000     send_to_all: SETINFO driver.parameter.port
"/dev/ttyS1"
   0.000472     debug level is '5'
   0.004317     upsdrv_initups...
   0.106821     send: 'QGS'
   1.108364     read: timeout (0)
   1.108647     qx_process_answer: short reply (input.voltage)
   1.109384     send: 'QGS'
   2.110945     read: timeout (0)
   2.111125     qx_process_answer: short reply (input.voltage)
   2.111446     send: 'QGS'
   3.112802     read: timeout (0)
   3.113027     qx_process_answer: short reply (input.voltage)
   3.113659     send: 'M'
   4.115052     read: timeout (0)
   4.115296     qx_process_answer: short reply (ups.firmware.aux)
   4.115916     send: 'M'
   5.117221     read: timeout (0)
   5.117454     qx_process_answer: short reply (ups.firmware.aux)
   5.118082     send: 'M'
   6.119436     read: timeout (0)
   6.119483     qx_process_answer: short reply (ups.firmware.aux)
   6.120102     send: 'M'
   7.121221     read: timeout (0)
   7.121267     qx_process_answer: short reply (ups.firmware.aux)
   7.121534     send: 'M'
   8.121940     read: timeout (0)
   8.122012     qx_process_answer: short reply (ups.firmware.aux)
   8.122584     send: 'M'
   9.123768     read: timeout (0)
   9.123808     qx_process_answer: short reply (ups.firmware.aux)
   9.124381     send: 'QS'
  10.125458     read: timeout (0)
  10.125510     qx_process_answer: short reply (input.voltage)
  10.125784     send: 'QS'
  11.127225     read: timeout (0)
  11.127248     qx_process_answer: short reply (input.voltage)
  11.127516     send: 'QS'
  12.128803     read: timeout (0)
  12.128839     qx_process_answer: short reply (input.voltage)
  12.129325     send: 'D'
  13.130616     read: timeout (0)
  13.130732     qx_process_answer: short reply (input.voltage)
  13.131177     send: 'D'
  14.132452     read: timeout (0)
  14.132491     qx_process_answer: short reply (input.voltage)
  14.133038     send: 'D'
  15.134371     read: timeout (0)
  15.134413     qx_process_answer: short reply (input.voltage)
  15.134985     send: 'Q1'
  16.136148     read: timeout (0)
  16.136233     qx_process_answer: short reply (input.voltage)
  16.136781     send: 'Q1'
  17.138132     read: timeout (0)
  17.138157     qx_process_answer: short reply (input.voltage)
  17.138472     send: 'Q1'
  18.139762     read: timeout (0)
  18.139800     qx_process_answer: short reply (input.voltage)
  18.140562     send: 'Q1'
  19.141915     read: timeout (0)
  19.142021     qx_process_answer: short reply (input.voltage)
  19.142575     send: 'Q1'
  20.143857     read: timeout (0)
  20.143895     qx_process_answer: short reply (input.voltage)
  20.144443     send: 'Q1'
  21.145828     read: timeout (0)
  21.145869     qx_process_answer: short reply (input.voltage)
  21.146458     send: 'Q1'
  22.147803     read: timeout (0)
  22.147886     qx_process_answer: short reply (input.voltage)
  22.148437     send: 'Q1'
  23.149876     read: timeout (0)
  23.149917     qx_process_answer: short reply (input.voltage)
  23.150486     send: 'Q1'
  24.151597     read: timeout (0)
  24.151635     qx_process_answer: short reply (input.voltage)
  24.152194     send: 'Q1'
  25.153359     read: timeout (0)
  25.153420     qx_process_answer: short reply (input.voltage)
  25.153810     send: 'Q1'
  26.155268     read: timeout (0)
  26.155306     qx_process_answer: short reply (input.voltage)
  26.155872     send: 'Q1'
  27.157368     read: timeout (0)
  27.157405     qx_process_answer: short reply (input.voltage)
  27.158010     send: 'Q1'
  28.159325     read: timeout (0)
  28.159404     qx_process_answer: short reply (input.voltage)
  28.159950     send: 'Q1'
  29.161389     read: timeout (0)
  29.161413     qx_process_answer: short reply (input.voltage)
  29.161734     send: 'Q1'
  30.163172     read: timeout (0)
  30.163194     qx_process_answer: short reply (input.voltage)
  30.163200     Device not supported!
  30.163204     Device not supported!

Best regards,
Robert SZAKSZ


----- Original Message -----
From: "Charles Lepple" <clepple at gmail.com>
To: "R?bert SZAKSZ" <robert at szaksz.eu>
Cc: nut-upsuser at lists.alioth.debian.org
Sent: Friday, November 20, 2015 1:39:17 PM
Subject: Re: [Nut-upsuser] Contact-closure UPS

On Nov 19, 2015, at 12:04 PM, R?bert SZAKSZ <robert at szaksz.eu>
wrote:> output(nutdrv_qx cmd upsdrvctl -DDD start)
> 
> Network UPS Tools - UPS driver controller 2.7.3
>   0.000000
> If you're not a NUT core developer, chances are that you're told to
enable debugging
> to see why a driver isn't working for you. We're sorry for the
confusion, but this is
> the 'upsdrvctl' wrapper, not the driver you're interested in.
> 
> Below you'll find one or more lines starting with 'exec:'
followed by an absolute
> path to the driver binary and some command line option. This is what the
driver
> starts and you need to copy and paste that line and append the debug flags
to that
> line (less the 'exec:' prefix).
> 
>   0.000665     Starting UPS: infosec
>   0.000891     1 remaining attempts
>   0.001135     exec:  /usr/lib/ups/driver/nutdrv_qx -a infosec
The above message is saying that the debug flags need to be added to the driver
command line, not to the upsdrvctl command:

/usr/lib/ups/driver/nutdrv_qx -DDD -a infosec

-- 
Charles Lepple
clepple at gmail

Charles Lepple

2015-Nov-21 02:28 UTC

head link

[Nut-upsuser] Contact-closure UPS

On Nov 20, 2015, at 12:17 PM, R?bert SZAKSZ <robert at szaksz.eu>
wrote:> 
> No progress has been made:
> 
> cable is UPS - PC
> 6 - 3
> 7 - 5
> 9 - 2
> 
Maybe pins 4 and 7 (ground) both need to be connected on the UPS side?
> for ./blazer_ser -DDDDD -a infosec
>   0.000000     send_to_all: SETINFO driver.parameter.port
"/dev/ttyS1"
>   0.000323     debug level is '5'
>   0.103068     send_to_all: SETINFO device.type "ups"
>   0.103104     send_to_all: SETINFO driver.version "2.7.3"
>   0.103118     send_to_all: SETINFO driver.version.internal
"1.56"
>   0.103131     send_to_all: SETINFO driver.name "blazer_ser"
>   0.103141     Trying megatec protocol...
>   0.103687     send: 'Q1'
>   1.105456     read: timeout
>   1.105823     blazer_status: short reply
Unfortunately, I don't think there is a safe way (in software) to determine
whether the UPS is not receiving the signal, or whether the PC is not receiving
the reply.

If you have a multimeter, you could check pin 9 on the UPS relative to pin 4/7
to see if it is being driven negative.

-- 
Charles Lepple
clepple at gmail

Róbert SZAKSZ

2015-Nov-21 07:43 UTC

head link

[Nut-upsuser] Contact-closure UPS

>On Nov 20, 2015, at 12:17 PM, R?bert SZAKSZ <robert at szaksz.eu>
wrote:
>> 
>> No progress has been made:
>> 
>> cable is UPS - PC
>> 6 - 3
>> 7 - 5
>> 9 - 2
>> 
>
>Maybe pins 4 and 7 (ground) both need to be connected on the UPS side?I connected both to pin 5 
>Unfortunately, I don't think there is a safe way (in software) to
determine whether the UPS is not receiving the signal, or whether the PC is not
receiving the reply.
>
>If you have a multimeter, you could check pin 9 on the UPS relative to pin
4/7 to see if it is being driven negative.I mesured it and on DC and it shows 0 V (zero V). 
May be the information (pls. see attachment) that UPS PIN1 should bee keept HI
is mandatory. Should I connect it to PC PIN4 DTR?

OR 

I need to follow with contact closure cable?

Best regards,
Robert SZAKSZ. 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Infosec_UPS_connector.PNG
Type: image/png
Size: 51305 bytes
Desc: not available
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20151121/3c6c2f60/attachment-0001.png>

Seemingly Similar Threads

Search for more reasonably related threads

Nut upsuser - Nov 2015 - Contact-closure UPS

[Nut-upsuser] Contact-closure UPS

[Nut-upsuser] Contact-closure UPS

[Nut-upsuser] Contact-closure UPS

Seemingly Similar Threads