Displaying 6 results from an estimated 6 matches for "pin9".
Did you mean:
pin
2015 Nov 16
2
Contact-closure UPS
...e one UPS Infosec XP Pro 2500 RM and it works with windows sw RUPS2000.
Now I want to install this UPS as virtual server on vmware ESXi vMA - (SUSE SLES 11SP2 linux).
On this linux I have NUT 2.6.0 and I stopped now with configuration of genericups driver.
Working cable (direct cable pin1-pin1 ... pin9-pin9) connection on Windows:
PIN | PC | UPS
__________________________________________________________________________________
Pin1 | DCD | described as DTR (must keep Hi)
Pin2 | RxD | AC Power fail (NO, connected to pin4 UPS ground in case of AC failure)
Pin3 | TxD | N/A...
2006 May 16
2
Meetme and authentication
...nique phone number (no matter if they are moderators or just plain
users). I use Asterisk 1.2.6
The available conferences are defined as follows:
conf => 1000,user pin1, moderator pin1
conf => 1001,user pin2, moderator pin2
conf => 1002,user pin3, moderator pin3
...
conf => 1009, user pin9, moderator pin9
The users are prompted whether they are a moderator or a user. When they
choose, they are redirected to the conference they request:
- using options aAPsX for moderators (moderator + marked + ask PIN +
allow menu using *)
- using options Psw for users (ask PIN + allow menu + wait f...
2015 Nov 16
0
Contact-closure UPS
...Pro 2500 RM and it works with windows sw RUPS2000.
> Now I want to install this UPS as virtual server on vmware ESXi vMA - (SUSE SLES 11SP2 linux).
> On this linux I have NUT 2.6.0 and I stopped now with configuration of genericups driver.
>
> Working cable (direct cable pin1-pin1 ... pin9-pin9) connection on Windows:
>
> PIN | PC | UPS
> __________________________________________________________________________________
> Pin1 | DCD | described as DTR (must keep Hi)
> Pin2 | RxD | AC Power fail (NO, connected to pin4 UPS ground in case of AC failur...
2015 Nov 16
2
Contact-closure UPS
...it works with windows sw RUPS2000.
>> Now I want to install this UPS as virtual server on vmware ESXi vMA - (SUSE SLES 11SP2 linux).
>> On this linux I have NUT 2.6.0 and I stopped now with configuration of genericups driver.
>>
>> Working cable (direct cable pin1-pin1 ... pin9-pin9) connection on Windows:
>>
>> PIN | PC | UPS
>> __________________________________________________________________________________
>> Pin1 | DCD | described as DTR (must keep Hi)
>> Pin2 | RxD | AC Power fail (NO, connected to pin4 UPS ground...
2015 Nov 21
2
Contact-closure UPS
>On Nov 20, 2015, at 12:17 PM, R?bert SZAKSZ <robert at szaksz.eu> wrote:
>>
>> No progress has been made:
>>
>> cable is UPS - PC
>> 6 - 3
>> 7 - 5
>> 9 - 2
>>
>
>Maybe pins 4 and 7 (ground) both need to be connected on the UPS side?
I connected both to pin 5
>Unfortunately, I don't think there is a safe way (in software)
2015 Nov 21
2
Contact-closure UPS
...t; May be the information (pls. see attachment) that UPS PIN1 should bee keept HI is mandatory. Should I connect it to PC PIN4 DTR?
>
>Certainly possible. blazer_ser and nutdrv_qx should set DTR high and RTS low by default, but that can be adjusted.>
I will try to make both cables, but UPS PIN9 (TX) doesn't answer it seems like no power on it.
>>
>> OR
>>
>> I need to follow with contact closure cable?
>
>If the UPS is capable of the smart protocol, I still think that is worth trying first. But it's up to you.
I am not 100% sure that smart protocol...