Nut upsuser - May 2015 - Are UPS shutdown commands automatically sent?

I'm testing that my system will shutdown when the UPS has been on battery
for 10 seconds.  That all works fine....10 seconds after pulling the plug, my
system does shut down.  However, I am not getting the commands into the UPS
telling it to power off and then power on.  I had thought I read somewhere that
these commands are sent automatically when "upsmon -c fsd"
happens...but I can't find that, nor can I find any clear instructions on
where I would put the commands to tell the UPS to start its shutdown and restart
timers.

Sincerely,
Robert G. Groner
Software Engineer

RTD Embedded Technologies, Inc.
ISO 9001 and AS9100 Certified
Ph: 814-234-8087
www.rtd.com<http://www.rtd.com/>

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20150521/e298db82/attachment.html>