Nut upsuser - Dec 2014 - Changing self test date

Le Thu, 4 Dec 2014 08:42:37 -0500
Charles Lepple <clepple at gmail.com> ?crivait:
> On Dec 4, 2014, at 5:30 AM, Frantz de Germain <frantz at
info.univ-angers.fr>
> wrote:
> 
> > Hello,
> > 
> > does any one know how to change the date of the self tests on APC
UPSes ?
> > I'd like to be able to choose the day and the hour so that it
happens at
> > office hours, in case of any problem...
> > 
> > I've tried to do this by launching a test at a convenient time,
but the
> > self tests still occurs at the previous date and hour :-(
> 
> The apctest program from apcupsd does not offer much more insight:
> 
>   
http://sourceforge.net/p/apcupsd/svn/HEAD/tree/branches/Branch-3_14/src/apctest.c#l2202
> 
> This forum post from 2013 suggests that an easy way is to change the UPS
> setting to "test at power on", then use a script (with NUT, you
would run
> something like "upscmd ups at server battery.start.quick") to run
it at your
> preferred time:
> 
>    http://forums.apc.com/message/46002
> 
> Changing the self test interval will depend on your specific UPS model.
Thanks for your answer, Charles. This confirms what I thought : no other way
than turning off and on the UPSes to change date and hour of self tests. So,
effectively, the best way to have full control is to schedule tests via
scripts.

Regards

-- 
Frantz de Germain
D?partement Informatique UFR Sciences / DDN
Universit? d'Angers

Le Fri, 5 Dec 2014 10:07:33 +0100
Frantz de Germain <frantz at info.univ-angers.fr> ?crivait:
> Le Thu, 4 Dec 2014 08:42:37 -0500
> Charles Lepple <clepple at gmail.com> ?crivait:
[...] 
> > This forum post from 2013 suggests that an easy way is to change the
UPS
> > setting to "test at power on", then use a script (with NUT,
you would run
> > something like "upscmd ups at server battery.start.quick")
to run it at your
> > preferred time:
[...]
> 
> Thanks for your answer, Charles. This confirms what I thought : no other
way
> than turning off and on the UPSes to change date and hour of self tests.
So,
> effectively, the best way to have full control is to schedule tests via
> scripts.
What is the difference between "test.battery.start.deep" and
"test.battery.start.quick" command (upscmd) ?

Regards.

-- 
Frantz de Germain
D?partement Informatique UFR Sciences / DDN
Universit? d'Angers

On Dec 18, 2014, at 9:16 AM, Frantz de Germain <frantz at
info.univ-angers.fr> wrote:
> What is the difference between "test.battery.start.deep" and
> "test.battery.start.quick" command (upscmd) ?
The intent for the quick test is to only discharge the battery a little bit,
whereas the deep test would discharge until the low battery threshold is reached
(or the test is stopped).

In practice, the difference is determined by the UPS firmware.

-- 
Charles Lepple
clepple at gmail