search for: unconfigured

...said, there is a long story there. Does anyone know what is going on, or what I should do without further elaboration? ## errors when installing R via Synaptic E: r-base-core: subprocess installed post-installation script returned error exit status 10 E: r-base-dev: dependency problems - leaving unconfigured E: r-cran-boot: dependency problems - leaving unconfigured E: r-cran-mass: dependency problems - leaving unconfigured E: r-cran-class: dependency problems - leaving unconfigured E: r-cran-cluster: dependency problems - leaving unconfigured E: r-cran-codetools: dependency problems - leaving unconfig...

Hi guys, I have a quick question, I am playing around with ZFS and here''s what I did. I created a storage pool with several drives. I unplugged 3 out of 5 drives from the array, currently: NAME STATE READ WRITE CKSUM gpool UNAVAIL 0 0 0 insufficient replicas raidz1 UNAVAIL 0 0 0 insufficient replicas c8t2d0 UNAVAIL 0 0

...are 12 Fax-Modems (Elsa MicroLink ISDN/TL V.34) which are only operating in dial out analog mode to deliver fax messages. After a while of running fine (50-200 dial out connections) on some S0 spans the following message occurs over and over again: chan_zap.c:8009 pri_dchannel: Ring requested on unconfigured channel 255/255 span 5 The Modems connected to this span get NO DIALTONE for every ATD. Modems on other spans continue to operate. After restarting asterisk everything is okay again for a while. Any hints about what is going on here are greatly appreciated ;-) TIA, Bruno - bruno @ ic3s.de ----...

Usually I used real Digium cards in asterisk systems, so I'm running into this for the first time. dahdi_tool reports that dahdi_dummy is in state UNCONFIGURED. This isn't super surprising, as it seems like the configuration files for DAHDI are really intended only for configuring real physical cards. But that begs the question: Is there any legal DAHDI configuration for dahdi_dummy such that dahdi_tool will stop complaining about an UNCONFIGURED dah...

...are 12 Fax-Modems (Elsa MicroLink ISDN/TL V.34) which are only operating in dial out analog mode to deliver fax messages. After a while of running fine (50-200 dial out connections) on some S0 spans the following message occurs over and over again: chan_zap.c:8009 pri_dchannel: Ring requested on unconfigured channel 255/255 span 5 The Modems connected to this span get NO DIALTONE for every ATD. Modems on other spans continue to operate. This error seems to appear mostly on span 5 and 6. After restarting asterisk everything is okay again for a while. Any hints about what is going on here are great...

...PMA on the server, and write its configuration file for the phones. I will tie each phone to its configuration using the MAC, which I already know (config_auth=mac) 4) I reload the module as required to reload the configuration file. Now that everything else is ready, I have to make the previously unconfigured Digium phones to query the net for the DPMA server. How? I would rather not physically locate and reset every single phone (all 100 of them, to cite a random number). I want a way to remotely force the phones to re-query the net and discover the configured DPMA server. The "digium_phones rec...

Currently i'm migrating an existing dovecot 1.2 server to dovecot 2.0.11, once configured the 2.0 server works, auth works... but i get these messages in mail.log: dict: Error: dict client: Unconfigured dictionary name 'quotadict' Mar 17 16:46:14 penny dovecot: imap(mailbox at example.com): Error: write(/var/run/dovecot/dict) failed: Broken pipe Mar 17 16:46:38 penny dovecot: dict: Error: dict client: Unconfigured dictionary name 'quotadict' Mar 17 16:46:38 penny dovecot: imap(mail...

After working fine for a week or so my new Quad E1 asterisk 1.8 system has started rejecting outbound calls from the Nortel BMC 450 it is connected to. The cli fills up with these: sig_pri.c: Ring requested on unconfigured channel 255/255 span 3 Is this likely to be a 1) config error 2) cable issue (I made them) 3) hardware problem with the Digium card 4) software (lib pri) Any clues? Anyone seen this recently (google shows it in 2005 but not since as far as I can see) T. Tim Panton - Web/VoIP consultant a...

I have a serious problem that repeats very often, after 30 - 50 calls and I can only solve it by stopped and restarting * :-( After a while, * seems to loose track of something. When an ISDN call from PBX needs to go to the Telco, I get 'Ring requested on unconfigured channel 255/255 span 2' It's always channel 255/255 ??, the 'span' number is random Setup: * between Local Telco (2 BRI) and Samsumg PBX (2 BRI). I have also a TDM400P for some Analog lines and have some Sip phones too. Samsung ISDN PBX (2 lines) -> * with Junghanns QuadBRI -&...

Author: rralphs Repository: /hg/zfs-crypto/gate Revision: 10ba48f9b729659165d98f28bf3c74770986fae2 Log message: 6224221 cannot unconfigure fc tape device that has been physically removed 6252197 System panic in st:st_runout during ISL fault test 6260355 st_gen_mode_sense and st_genmode_select do not set a timeout value for uscsi_cmd Files: update: usr/src/uts/common/io/scsi/targets/st.c update:

I have several servers using ztdummy as the timing source, some CentOS 4.x, some CentOS 5.x, some Asterisk 1.2.x, some Asterisk 1.4.x. "zap show status" differs between the servers: ZTDUMMY/1 (source: Linux26) 1 UNCONFIGUR 0 0 0 ZTDUMMY/1 (source: RTC) 1 UNCONFIGUR 0 0 0 ZTDUMMY/1 1 UNCONFIGUR 0

Flag the system for reconfiguration by touching /.unconfigured . Signed-off-by: Wanlong Gao <gaowanlong at cn.fujitsu.com> --- TODO | 2 - sysprep/Makefile.am | 2 + sysprep/sysprep_operation_flag_reconfiguration.ml | 42 +++++++++++++++++++++ 3 files changed, 44 inserti...

On Fri 2015-06-12 01:52:54 -0400, Mark D. Baushke wrote: > I have communicated with Allen Roginsky on this topic and I have been given permission to post his response. > > In this message below, the 'vendor' was Darren Tucker's generated prime > that used a generator value of 5. > > -- Mark > > From: "Roginsky, Allen" <allen.roginsky at

Hi all, I'm having some problems getting TDMoE setup for the 1st time. I have a TE405P installed in the main server with an ethernet cross-connection to the secondary machine. (Yes, I know about IAX2 but I want to use TDMoE to simulate using T1s.) I'm using -HEAD from yesterday. On the main machine /etc/zaptel.conf: loadzone = us defaultzone=us

https://bugzilla.mindrot.org/show_bug.cgi?id=2302 --- Comment #13 from Darren Tucker <dtucker at zip.com.au> --- (In reply to Christoph Anton Mitterer from comment #10) [...] > Even though an attacker cannot (AFAIU??) for a connection to > downgrade to the weaker groups, The server's DH-GEX exchange hash includes the DH group sizes it received from the client. If these are

Is there a way to use DPMA to enumerate the Digium phones that are plugged in and visible in the local network, but not (yet) configured through the DPMA configuration files in Asterisk. I would like to write a frontend that lists the DPMA capable phones, presents a GUI to specify the various options, then write the configuration files as required and make the phones read these settings. Ideally

> > Apparently notify.check-sync does work but only if you're NOT using > the DPMA. I just tried it and the phone just responds with a 200/OK > and does nothing. Did you disable enable_check_sync in the xml config? By default this option is enabled and phones should restart with check-sync SIP NOTIFY

Although not fatal, _unconfigure_xenpv should report a warning and return if firstboot is not available (during Windows conversions). --- lib/Sys/VirtConvert/Converter/Windows.pm | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/lib/Sys/VirtConvert/Converter/Windows.pm b/lib/Sys/VirtConvert/Converter/Windows.pm index 59d273f..ce8b474 100644 --- a/lib/Sys/VirtConvert/Converter/Windows.pm

Hi all, We have our system hosted publicly and 4 phones are connected remotely at employee's home, and when they try to do a assisted transfer to one of the employee at the main office, the call is lost. For ex: person A calls person B, person B calls person C for assisted transfer, and as soon as person B hits transfer button again to transfer person A to C, the call is lost. But in the

https://bugzilla.mindrot.org/show_bug.cgi?id=2302 --- Comment #4 from Damien Miller <djm at mindrot.org> --- Comment on attachment 2630 --> https://bugzilla.mindrot.org/attachment.cgi?id=2630 Make the DH-GEX fallback group 4k bit. Where did this group come from? IMO it would be best to use one of the standard groups if we're picking another fixed one - logjam attacks aren't