Nut upsuser - Jun 2014 - HP T1000 G3 shutting down too fast

I have an HP T1000 G3 for looking after three desktop PCs, a switch and
a router.  The batteries seem to be fine (battery tests, charge
levels), but when I'm testing a power-failure, the UPS starts the FSD
much too soon (judging by the battery charge level monitored with
upsc). 
The load is about 300W, less than half nominal load, so despite the
batteries not being brand new, it ought to keep going for maybe 5
minutes. Instead it starts the shut down after about 20 seconds. 

This sounds like a case for "ignorelb", I was just wondering if this
is
well known for this UPS?


-- 
Per Jessen, Z?rich (23.4?C)
http://www.hostsuisse.com/ - virtual servers, made in Switzerland.

Per Jessen wrote:
> I have an HP T1000 G3 for looking after three desktop PCs, a switch
> and
> a router.  The batteries seem to be fine (battery tests, charge
> levels), but when I'm testing a power-failure, the UPS starts the FSD
> much too soon (judging by the battery charge level monitored with
> upsc).
> The load is about 300W, less than half nominal load, so despite the
> batteries not being brand new, it ought to keep going for maybe 5
> minutes. Instead it starts the shut down after about 20 seconds.
> 
> This sounds like a case for "ignorelb", I was just wondering if
this
> is well known for this UPS?
Ignore this, I think the batteries are well worn down, despite tests
being positive.  I'm switching to another UPS. 

 

-- 
Per Jessen, Z?rich (23.4?C)
http://www.dns24.ch/ - your free DNS host, made in Switzerland.