Richard
2010-Jul-24 21:36 UTC
[Nut-upsuser] NUT upsdrv Using bcmxcp_usb Won't Connect to UPS
I can't seem to get NUT to connect to my new PowerWare (Eaton) 5115. (Linux 2.6.34.1 x86_64, Gentoo) # /etc/init.d/upsdrv start * Caching service dependencies ... [ ok ] * Starting UPS drivers ... Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - BCMXCP UPS driver 0.23 (2.4.3) USB communication subdriver 0.18 Can't claim POWERWARE USB interface: could not claim interface 0: Device or resource busy Unable to find POWERWARE UPS device on USB bus (USB) What would already 'claim' the UPS? USB sees the UPS, from lsusb: ... Bus 003 Device 005: ID 06da:0002 Phoenixtec Power Co., Ltd UPS ...
Charles Lepple
2010-Jul-25 03:10 UTC
[Nut-upsuser] NUT upsdrv Using bcmxcp_usb Won't Connect to UPS
On Jul 24, 2010, at 5:36 PM, Richard wrote:> I can't seem to get NUT to connect to my new PowerWare (Eaton) 5115. > (Linux 2.6.34.1 x86_64, Gentoo) > > # /etc/init.d/upsdrv start > * Caching service dependencies ... > [ ok ] > * Starting UPS drivers ... > Network UPS Tools - UPS driver controller 2.4.3 > Network UPS Tools - BCMXCP UPS driver 0.23 (2.4.3) > USB communication subdriver 0.18 > Can't claim POWERWARE USB interface: could not claim interface 0: > Device > or resource busy > Unable to find POWERWARE UPS device on USB bus (USB) > > > What would already 'claim' the UPS?Possibly an older version of this driver? Try running "ps auxww | grep bcmxcp" to see if an older version of the driver wasn't stopped when you upgraded. I'm guessing this is the upgrade scenario described in this thread: http://forums.gentoo.org/viewtopic-p-6362412.html ?