search for: bcmxcp_usb

Greetings, The way that bcmxcp_usb reacts to and recovers from a USB cable unplug-plug appears to have changed significantly between 2.4.1 and 2.6.0. While I can see some improvements, bcmxcp_usb 2.6.0 does not appear to handle a USB cable unplug-plug correctly. Does anyone know if this has been fixed in subsequent releases? Here...

I tried switching to the USB version of bcmxcp_usb and get this error when I try starting up upsdrvctl or bcmxcp_usb like so: /etc/nut/bcmxcp_usb -DDDD -a powerware -u nut I used this for ups.conf: [powerware] driver = bcmxcp_usb port = auto With the serial/usb dongle, I used this successfully: [powerware] driver = bcmxcp...

...t it! I have two Powerware UPS's here, a 9120/1500va and a 5110/700va. The 9120 has used a hacked bcmxcp driver (serial) from the 2.0.2 nut version for about a year now (which I'll explain more about in a seperate email to the dev list), and the 5110 which I just purchased is using the new bcmxcp_usb from 2.0.4 ... which brings me to the point of the post... The upsc output shows a blank serial number, and no battery.runtime at all, see below: [rohbags@dvr drivers]# upsc pw5110@localhost battery.voltage: 13.5 driver.name: bcmxcp_usb driver.parameter.shutdown_delay: 90 driver.version: 2.0.4 d...

Hi I'm having a problem with the bcmxcp_usb driver FSD command: everything seems to work apart from: upsmon -c fsd Environment: Ubuntu 7.04, nut 2.0.5-1, nut-usb 2.0.5-1, Powerware 3105 UPS. upsd appears to send the FSD command to the UPS, upsmon then runs my NOTIFYCMD (which halts my PC) but the UPS just doesn't turn off. Here are...

2009/8/28 Thomas Zulliger <Thomas.Zulliger at quiksilver.com.au> > Hi Arnaud > Hi Thomas, > I'm experiencing exactly the same problem > > DNS-323 fun_plug Fonz > nut 2.4.1-1.tgz > powerware 3105 > using BCMXCP_usb > > /mnt/HD_a2/packages # lsusb > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 002: ID 0592:0002 Powerware Corp. > Bus 001 Device 001: ID 0000:0000 > > /mnt/HD_a2/packages # upsdrvctl -DD start > Network UPS Tools - UPS driver controller 2.4.1 > Starting UPS: pw3105...

...is that your test and feedback is welcome ;-) For more info on getting and compiling the development release: http://buildbot.ghz.cc/~buildbot/docs/r2003-144/website/download.html Note that you don't need to install nut ; simply running from the build directory is sufficient, using: $ drivers/bcmxcp_usb -DD -a <ups name> will tell you if your issue is solved. And I'm very confident that it will indeed be solved. cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://www.eaton.com/mgeops Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer -...

Ok, I installed the ups, and installed nut, and /proc/bus/usb/devices says this T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=06da ProdID=0002 Rev= 0.01 S: Manufacturer=POWERWARE S: Product=Powerware UPS C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 20mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00

...e way you installed NUT. It's possibly one of these: https://launchpad.net/distros/ubuntu/+source/nut/+bug/6679 https://launchpad.net/distros/ubuntu/+source/nut/+bug/6585 Andrew Wallace wrote: > Hi > > I've been trying to get NUT working with my POWERWARE 5110, I am using > the bcmxcp_usb driver, but its not working properly, I am able to get > the driver to connect to the ups, but only if I add -u root to the > command. (This is not too much of a problem atm, but I would like to be > able to run it as nut) > > The problem is when I run upsd, I get, Can't connect...

Hi, I have an UPS Powerware 5110 ( usb connection ), on Linux OS is Debian 4.0 The /etc/ups.conf file setting is: [myups] driver = bcmxcp_usb port = auto desc = "UPS Powerware 5110 1500 VA" When the daemon starts it displays the following message: "Starting Network UPS Tools: (upsdrvctl failed)." Looking at /var/log/syslog I found the following line "Can't connect to UPS [myups] (bcmxcp_usb-auto): N...

I can't find a way to configure bcmxcp_usb to communicate with 2 UPS units. Maybe more simply, I can't find a way to tell the driver to only talk to one of the units on the bus. That is, I cannot find that the driver configuration file supports "serial =" or "bus = " or other such discriminators that other drivers...

Hi, I recently downgraded my kernel to 2.4 series (2.4.32-rc2). Now I can't get nut running. It was fine with 2.6.14. It say's: --------------------- # ./bcmxcp_usb -uroot AUTO Network UPS Tools - BCMXCP UPS driver 0.10 (2.1.0) Can't reset POWERWARE USB endpoint Unable to find POWERWARE UPS device on USB bus ... --------------------- I've straced it in nut_usb.c usb_clear_halt()-function. If I comment it out, it say's "Receive error (Reque...

Kjell Claesson wrote: > Then i have a problem. My computer is down due to a > faulty mainboard, Youch. I hate it when that heppens. Hope it wasn't because you got a power spike ;-) Let me or Georg know if you want us to run any debug code. Feels like a bcmxcp_usb driver bug to me since the bcmcxp serial driver works fine and all my other USB devices work fine (wifi adapter, memory card reader, etc.) ken __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

Hi, I have got a Powerware 5110 UPS which has a usb interface on it. I have downloaded and compiled nut-2.0.3-pre2 with the usb drivers enabled on RedHat Enterprise V3 however I have been unable to get nut to connect to the UPS. I have tried executing the driver directly (using bcmxcp_usb -DD -u root /proc/bus/usb/002/002) as well as using upsdrvctl with the port set to auto (am I correct in using /proc/bus/usb/002/002 as the device given the UPS is at this address?). Here is the relevant output from lsusb: Bus 002 Device 002: ID 0592:0002 Powerware Corp. Device Descriptor: bLen...

Hi. I'm looking for a way to configure an Eaton Powerware 5125 under Debian Squeeze (amd64) with USB port. Can someone help me? Find attached bellow my settings: # cat /etc/nut/ups.conf ... [ups01] driver = bcmxcp_usb port = /dev/bus/usb/002/003 desc = "Powerware 5125" # ls -la /dev/bus/usb/002/003 crw-rw-r-- 1 root nut 189, 130 Nov 21 11:45 /dev/bus/usb/002/003 # /lib/nut/bcmxcp_usb -DDDDDDDD -a ups01 Network UPS Tools - BCMXCP UPS driver 0.23 (2.4.3) USB communication subdriver 0.18 0.000000...

...to use the same paths as Ubuntu uses to build their binaries. Let me know if you're interested in trying one of those routes (admittedly, it makes for a bit of a Frankenstein system) and I can explain in more detail. Charles, thanks very much for the information :) I've parachuted in the bcmxcp_usb binary from Ubuntu Trusty from nut-server (http://mirrors.kernel.org/ubuntu/pool/main/n/nut/nut-server_2.7.1-1ubuntu1_i386.deb) by using dpkg-deb to pull it out of the .deb file: $ ls -l /lib/nut/bcmxcp* -rwxr-xr-x 1 root root 75880 May 20 2013 /lib/nut/bcmxcp -rwxr-xr-x 1 root root 80544 Feb 1...

Hello, ppl! I try configure NUT for communicate with my Powerware 5115 UPS. As root I run '/lib/nut/bcmxcp_usb -DDDD -u root -a ups', but driver can't connect to my UPS. Some output: Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.4) debug level is '4' usb_set_debug: Setting debugging level to 3 (on) usb_os_init: Found USB VFS at /dev/bus/usb usb_os_find_busses: Found 001 usb_os_find_device...

Hello... I have a PowerWare 9120 attached via USB to my Debian system. My ups.conf looks like this: [ups1] driver = bcmxcp_usb port = auto desc = "PowerWare 9120" When testing the driver with "upsdrvctl -u root start" I get: Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.4) Communications with UPS lost: Receive error (Request command):...

Hi I have PW 5115 500 UPS which has both RS232 and USB connectors. bcmxcp driver works fine with serial connection but bcmxcp_usb does not with USB one. After some USB sniffing on windows box I've found that PW5115 communicates in other way than supposed in driver. Applying attached patch makes driver to work properly. System: FreeBSD 6.2 but ugen driver needs patching in order to respect given timeout, patch already in...

Hi, I'm trying to get a Powerware 3105 UPS working on SuSE 10.0. I have compiled nut from the current Subversion repository. This UPS uses the bcmxcp_usb driver. I cannot get the driver to find the ups on the USB bus. The error message I get is:- -------------- bcmxcp_usb -u nut -DDDDD -a pw3105 -------------------- Network UPS Tools - BCMXCP UPS driver 0.10 (2.1.0) debug level is '5' Can't set POWERWARE USB configuration Unable to...

On Feb 12, 2014, at 7:50 PM, Tim Dawson wrote: > Run the driver with -DDDDD and see what variables it picks up. I have noted that with the Prestige 9 in bcmxcp, some variables are not consistent within models, and had to do some gentle remapping to get things to work correctly. Tim, is this the issue you mentioned on 2014-02-02 with blocks 0x9 and 0x13? I'll reply to that email. > On