Nut upsuser - Jan 2010 - problem with mailing (nut 2.4.1 and a powermust650 -> megatec_usb)

Hello guys


Yesterday i started do configure my Mustek Powermust650 with nut using 
the megatec_usb driver. Everything works fine except for the mailing 
when something happens. My upsmon looks like this:


MONITOR powermust650 at localhost 1 local controller master
MINSUPPLIES 1
SHUTDOWNCMD "/sbin/shutdown -h +0"
NOTIFYCMD /root/upsmailer
POLLFREQ 10
POLLFREQALERT 5
HOSTSYNC 15
DEADTIME 45
POWERDOWNFLAG /etc/killpower
NOTIFYMSG ONLINE        "UPS %s on line power"
NOTIFYMSG ONBATT        "UPS %s on battery"
NOTIFYMSG LOWBATT       "UPS %s battery is low"
NOTIFYMSG FSD           "UPS %s: forced shutdown in progress"
NOTIFYMSG COMMOK        "Communications with UPS %s established"
NOTIFYMSG COMMBAD       "Communications with UPS %s lost"
NOTIFYMSG SHUTDOWN      "Auto logout and shutdown proceeding"
NOTIFYMSG REPLBATT      "UPS %s battery needs to be replaced"
NOTIFYMSG NOCOMM        "UPS %s is unavailable"
NOTIFYMSG NOPARENT      "upsmon parent process died - shutdown
impossible"
NOTIFYFLAG ONLINE       SYSLOG+WALL+EXEC
NOTIFYFLAG ONBATT       SYSLOG+WALL+EXEC
NOTIFYFLAG LOWBATT      SYSLOG+WALL+EXEC
NOTIFYFLAG FSD          SYSLOG+WALL+EXEC
NOTIFYFLAG COMMOK       SYSLOG+WALL+EXEC
NOTIFYFLAG COMMBAD      SYSLOG+WALL+EXEC
NOTIFYFLAG SHUTDOWN     SYSLOG+WALL+EXEC
NOTIFYFLAG REPLBATT     SYSLOG+WALL+EXEC
NOTIFYFLAG NOCOMM       SYSLOG+WALL+EXEC
NOTIFYFLAG NOPARENT     SYSLOG+WALL+EXEC
RBWARNTIME 43200
NOCOMMWARNTIME 300
INALDELAY 5


the /root/upsmailer is just a simple shell script that mails the events, 
it looks like:


#!/bin/bash

RECIPIENT="controller at xxx"
SCRIPTNAME=`basename $0`

[ `echo $UPSNAME | wc -w` -eq "0" ] &&
UPSNAME="unknown"
[ `echo $NOTIFYTYPE | wc -w` -eq "0" ] &&
NOTIFYTYPE="unknown"
echo "$*" | mailx -s "$SCRIPTNAME: $UPSNAME $NOTIFYTYPE"
$RECIPIENT
exit 0

When i disconnect the UPS from the power line, i get a message in my 
syslog but not on the wall and the script isn't started either. What 
have i done wrong (i'm relatively new to nut :) )?


Greets Thomas

On Jan 9, 2010, at 7:43 AM, Thomas Stather wrote:
> Hello guys
>
>
> Yesterday i started do configure my Mustek Powermust650 with nut  
> using the megatec_usb driver. Everything works fine except for the  
> mailing when something happens. My upsmon looks like this:
>
>
> MONITOR powermust650 at localhost 1 local controller master
> MINSUPPLIES 1
> SHUTDOWNCMD "/sbin/shutdown -h +0"
> NOTIFYCMD /root/upsmailer
> POLLFREQ 10
> POLLFREQALERT 5
> HOSTSYNC 15
> DEADTIME 45
> POWERDOWNFLAG /etc/killpower
> NOTIFYMSG ONLINE        "UPS %s on line power"
> NOTIFYMSG ONBATT        "UPS %s on battery"
> NOTIFYMSG LOWBATT       "UPS %s battery is low"
> NOTIFYMSG FSD           "UPS %s: forced shutdown in progress"
> NOTIFYMSG COMMOK        "Communications with UPS %s established"
> NOTIFYMSG COMMBAD       "Communications with UPS %s lost"
> NOTIFYMSG SHUTDOWN      "Auto logout and shutdown proceeding"
> NOTIFYMSG REPLBATT      "UPS %s battery needs to be replaced"
> NOTIFYMSG NOCOMM        "UPS %s is unavailable"
> NOTIFYMSG NOPARENT      "upsmon parent process died - shutdown  
> impossible"
> NOTIFYFLAG ONLINE       SYSLOG+WALL+EXEC
> NOTIFYFLAG ONBATT       SYSLOG+WALL+EXEC
> NOTIFYFLAG LOWBATT      SYSLOG+WALL+EXEC
> NOTIFYFLAG FSD          SYSLOG+WALL+EXEC
> NOTIFYFLAG COMMOK       SYSLOG+WALL+EXEC
> NOTIFYFLAG COMMBAD      SYSLOG+WALL+EXEC
> NOTIFYFLAG SHUTDOWN     SYSLOG+WALL+EXEC
> NOTIFYFLAG REPLBATT     SYSLOG+WALL+EXEC
> NOTIFYFLAG NOCOMM       SYSLOG+WALL+EXEC
> NOTIFYFLAG NOPARENT     SYSLOG+WALL+EXEC
> RBWARNTIME 43200
> NOCOMMWARNTIME 300
> INALDELAY 5
^ I assume this is a cut-n-paste error?

If not, check to see if there are any messages in syslog saying that  
the configuration file couldn't be reloaded.
> the /root/upsmailer is just a simple shell script that mails the  
> events, it looks like:
>
>
> #!/bin/bash
>
> RECIPIENT="controller at xxx"
> SCRIPTNAME=`basename $0`
>
> [ `echo $UPSNAME | wc -w` -eq "0" ] &&
UPSNAME="unknown"
> [ `echo $NOTIFYTYPE | wc -w` -eq "0" ] &&
NOTIFYTYPE="unknown"
> echo "$*" | mailx -s "$SCRIPTNAME: $UPSNAME
$NOTIFYTYPE" $RECIPIENT
> exit 0
>
> When i disconnect the UPS from the power line, i get a message in my  
> syslog but not on the wall and the script isn't started either. What  
> have i done wrong (i'm relatively new to nut :) )?
Does your script have the execute bit turned on?

Also, the script will be run as the user you defined in the ./ 
configure script (or some username like "nut", if you are running from
a package). Be sure that the permissions on /root allow this mostly- 
unprivileged user to run the script. Usually this means at least scan  
permissions on /root (+x), but a better idea might be to put the  
script in /usr/local/sbin.

If you're interested in efficiency (embedded system or the like), you  
might want to rewrite the "unknown" checks - in their current form,  
they will fork a new subshell (``) and run wc. I think the following  
line will do the same thing:

echo "$*" | mailx -s "$SCRIPTNAME: ${UPSNAME:=unknown} $ 
{NOTIFYTYPE:=unknown}" $RECIPIENT

[cc'ing the list.]

On Sat, Jan 9, 2010 at 10:43 AM, Thomas Stather <thomasstather at aol.com>
wrote:
> Am 09.01.2010 14:41, schrieb Charles Lepple:
>>
>> On Jan 9, 2010, at 7:43 AM, Thomas Stather wrote:
>>> INALDELAY 5
>>
>> ^ I assume this is a cut-n-paste error?
>>
...
> The above error was an copy&paste mistake. And furthermore, the hint
with
> the execution bit in /root was correct as well, /root hat rwx------
> I copied the script to /usr/local/sbin and now i have to wait if there will
> be a mail notification (i edited the shell script as well like you said).
Good to know that fixed it.

-- 
- Charles Lepple