similar to: Poweraware 5115, ttyS0, Ubuntu 6.06.1

And here's a patch for Intel Math Kernel Library. This allows commercial users of Speex to use a high-speed FFT library that isn't GPL'd. (You do need to pay for it though). This is 3 times faster than the default FFT in speex, and also faster than FFTW3 since MKL has native support for the complex packing Speex uses. Since Intel hasn't supplied any pkg-config files, and which

Using the HOWTO in http://keystoneit.wordpress.com/2006/09/25/network-ups-tools-nut-on-ubuntu/ I installed nut on an Ubuntu Edgy LAMP Server with an Eaton Powerware 5110 attached to it via usb. But nut fails to start properly (see the error message "Starting Network UPS Tools: (upsdrvctl failed) upsd upsmon" below). It then complains about communication with the UPS being lost ("UPS

Hello everybody, at the following pages: http://www.rit.edu/~rc/docs/Survey_of_Clustered_Parallel_File_Systems_004_LANL.ppt http://www.intel.com/cd/ids/developer/asmo-na/eng/dc/tools/threading/238284.htm?page=2 I read: "[...] Currently, one additional drawback to Lustre is that a Lustre client cannot be on a server that is providing OSTs. This solution is being worked on and may be

I always assumed Wine wasnt available on ia64 (note not x64), it certainly hasnt been in the last few Ubuntu ia64 releases when I checked. However Ive read a couple of posts and articles (some dating years back- http://www.ibm.com/developerworks/linux/library/l-ivit.html) of people running it so I tried to compile. I can get it to ./configure, but make immediately dumps me to:

Alexander Chemeris wrote: > Hi, > > On 5/27/08, Thorvald Natvig <thorvald at natvig.com> wrote: > >> And here's a patch for Intel Math Kernel Library. This allows commercial >> users of Speex to use a high-speed FFT library that isn't GPL'd. (You do >> need to pay for it though). This is 3 times faster than the default FFT in >> speex, and

On Thu, Jul 31, 2008 at 2:19 AM, Duncan Sands <baldrick at free.fr> wrote: > Hi, > > > Can anyone tell me if invoke/unwind is stable in 2.3? I'm seeing some > > really weird stuff -- unwinds are ending up in seemingly arbitrary > places... > > definitely not inside the caller's unwind block My target is x86. > > codegen doesn't know how to

Hello. I've tried to configure Windows (complete port, Beta): Windows MSI installer 2.6.0-1 with my Powerware 5115 connected via USB port but have no luck. Here is my config files: *nut.conf:* MODE = netserver *ups.conf:* [PW5115] driver = bcmxcp_usb port = notUsed desc = "PowerWare 5115" *upsd.conf:* LISTEN 192.168.1.12 3493 *upsd.users:* [monuser]

Hello, I'm trying to run my weather station (Davis WMII) on wine 0-9-58 and OpenSuSe 10.3. After installation of WeatherLink 5.7.1, I try to communicate via COM1 but the program can't find it and even not test with a loop plug in COM1. I have changed the mode to 0777 for the serial devices in /etc/udev/rules.d/50-udev-default.rules and rebooted. /home/sel/.wine/dosdevices reveal that

Hello, I''m frustrated, and confused. Someone send me a light bulb. I have a UPS attached to the only serial port on a Dell PowerEdge 1600SC. When I boot the system with the xen kernel, ttyS0 NEVER gets created. I though that perhaps the default xen kernel config was the problem, so I configured a new one, based on the kernel config from the RHEL 4 (U3) kernel (which is running in

I am having trouble installing nut-2.0.2-1.x86_64.rpm nut-client-2.0.2-1.x86_64.rpm the service run as nut:nut, but /dev/ttyS0 is owned by root:uucp I can chown nut:nut /dev/ttyS0, but the owner changes on reboot. /etc/security/console.perms looks like to me that it only applies to user logins I have searched the web & found several how-tos, but most are at least a year old and do not

Hello I buyed a new server 2*XEON in a 2inch High 19"case. Now I have a problem that the riser card is 64bit so an ISDN PCI modem isn't possible. My question is can I use ISDN on com port /dev/ttyS0. If yes can I use it like the example in modem.conf as /dev/ttyI0 but use /dev/ttyS0 Does anybody have expirience with this ? Thanks Sjaak -- Dit bericht is gescand op virussen en

A new kvm guest on a CentOS6.5 x84_64 host is set up to make use of the serial port (virt-install ... --serial dev,path=/dev/ttyS0) <serial type='dev'> <source path='/dev/ttyS0'/> <target port='0'/> </serial> <console type='dev'> <source path='/dev/ttyS0'/> <target

This change updates a guest which uses Xen's xvc0 to use ttyS0 instead. In a related change, it also makes a console a 'standard device' will always be configured. --- lib/Sys/VirtV2V/Converter.pm | 5 +++- lib/Sys/VirtV2V/Converter/Linux.pm | 46 ++++++++++++++++++++++++++++++++++++ 2 files changed, 50 insertions(+), 1 deletions(-) diff --git

Hi, I am having the following setup: the kernel displays its messages to vga and to ttyS0. This works without xen. When I reboot my system with xen with the following options to xen and vmlinuz, xen.gz com1=115200,8n1 console=com1,vga vmlinuz console=ttyS0,115200 console=tty0 the system hangs up while booting the dom0 kernel. Has anyone such a setup working? The thin is, I want a console on

Hi, I am having the following setup: the kernel displays its messages to vga and to ttyS0. This works without xen. When I reboot my system with xen with the following options to xen and vmlinuz, xen.gz com1=115200,8n1 console=com1,vga vmlinuz console=ttyS0,115200 console=tty0 the system hangs up while booting the dom0 kernel. Has anyone such a setup working? The thin is, I want a console on

Not the same as the other treath, but also an tty access problem. I have an old an cheap digital camera wich isn't supported by gphoto(2). I can get the program running under wine only it shows me: err:dosfs:DOSFS_CreateCommPort Couldn't open /dev/ttyS0,115200 ! (check permissions) err:file:CreateFileA Couldn't open device 'COM1'! FIXME:pthread_rwlock_rdlock

Until last week my wine runs a Microcontroler Programmer under serial port very well, But in this week have problems to work wine for serial ports on my new Mandrake 8.1. Well, in Mdk 8.1 there is no ttyS0 devices but links to /dev/tts/0 and /dev/tts/1 I realy don't remember how was until last week, but I think about users and perms to devices. I try to chmod a+rw for /dev/tts/0 and tts/1

Short description: when upsmon starts it logs this to /var/log/messages: Jul 11 12:35:55 sorcerer upsmon[23902]: Startup successful Jul 11 12:35:55 sorcerer upsmon[23902]: user monuser not found Near as I can tell upsd is running properly. Long description: Centos 5 system (x86_64), built nut 2.2.2 from stable source with ./configure --with-usb --with-user=nut --with-group-nut make

Hi thanks Roger. Well I'm just using Ubuntu Server 16.04 LTS I only ran that command as a few guides say that's how to establish if a daemon is compiled with tcp wrappers: https://www.cyberciti.biz/faq/tcp-wrappers-hosts-allow-deny-tutorial/ I haven't really used TCP wrappers before so I'm not even sure if my hosts.allow entries are correct: upsd : ipaddressofclientgoeshere ups

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello everybody, I have a Debian network server doing monitoring for three UPS devices. > MONITOR r3000xr at localhost 1 monuser xxxxxxxxxx master > MONITOR apcups01 at localhost 1 monuser xxxxxxxxx monitor-only > MONITOR apcups02 at localhost 1 monuser xxxxxxxxx monitor-only I want nut to send an email to root for every changes nut