via.lej at free.fr
2007-Aug-11 19:23 UTC
[Nut-upsuser] [MGE EVOLUTION 850 VA/ ups 2.0.4] Output.voltage is at 0.0
Hello ! I've just a problem with upsd/upsmon 2.0.4, please have a look at the upsc command: -------------------- battery.charge: 59 battery.charge.low: 5 battery.runtime: 1312 battery.voltage: 24.0 driver.name: newhidups driver.parameter.port: auto driver.version: 2.0.4 driver.version.data: MGE HID 0.9 driver.version.internal: 0.28 input.frequency: 0.0 input.transfer.boost.low: 184.0 input.transfer.high: 294.0 input.transfer.low: 160.0 input.transfer.trim.high: 265.0 input.voltage: 0.0 outlet.0.desc: Main Outlet outlet.0.id: 0 outlet.0.switchable: 0 outlet.1.autoswitch.charge.low: 0 outlet.1.delay.shutdown: -1 outlet.1.delay.start: -1 outlet.1.desc: PowerShare Outlet 1 outlet.1.id: 1 outlet.1.switch: 1 outlet.1.switchable: 1 outlet.2.autoswitch.charge.low: 0 outlet.2.delay.shutdown: -1 outlet.2.delay.start: -1 outlet.2.desc: PowerShare Outlet 2 outlet.2.id: 2 outlet.2.switch: 1 outlet.2.switchable: 1 output.current: 0.40 output.frequency: 50.0 output.voltage: 0.0 output.voltage.target.battery: 24.0 output.voltage.target.line: 24.0 ups.delay.shutdown: -1 ups.delay.start: -1 ups.load: 17 ups.mfr: MGE UPS SYSTEMS ups.model: Evolution 850 ups.power.nominal: 850 ups.serial: AV2H2505X ups.status: OB DISCHRG ups.test.interval: 604800 ups.test.result: Done and passed ------------------------------- Look at the line output.voltage, the value is 0, i don't understand, what's the problem ? Thanks ! Vianney
Arjen de Korte
2007-Aug-11 20:09 UTC
[Nut-upsuser] [MGE EVOLUTION 850 VA/ ups 2.0.4] Output.voltage is at 0.0
via.lej at free.fr wrote:> Hello ! > > I've just a problem with upsd/upsmon 2.0.4, please have a look at the upsc command:[...]> Look at the line output.voltage, the value is 0, i don't understand, what's the problem ?First of all, the 'newhidups' has seen many improvements since nut-2.0.4 came out. So please upgrade to nut-2.2.0 first. If the results turn out the same, please post the output of the startup of the driver, with debugging enabled. You'd need to run the driver from the commandline with the -DDDDD option to do that. Best regards, Arjen
Apparently Analagous Threads
- Differences between newhidups (MGE tables) in 2.0.4 and svn trunk
- Differences between USB and serial on an MGE Pulsar Evolution 3000
- Outlet switching on the MGE Pulsar 1500 using usbhid-ups on FreeBSD
- MGE Pulsar Extreme communication problems
- NUT MGE Pulsar Ellipse Premium 800: Changed NUT rw variables?