Cleanline L-1000C upsc output: Init SSL without certificate database battery.charge: 100 battery.voltage: 13.2 battery.voltage.high: 13.00 battery.voltage.low: 10.40 battery.voltage.nominal: 12.0 device.type: ups driver.debug: 0 driver.flag.allow_killpower: 0 [driver.name](http://driver.name/): nutdrv_qx driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.synchronous: auto driver.state: quiet driver.version: 2.8.1 driver.version.data: Voltronic-QS 0.09 driver.version.internal: 0.36 driver.version.usb: libusb-1.0.27 (API: 0x100010a) input.voltage: 222.3 input.voltage.fault: 222.3 output.current.nominal: 1.0 output.frequency: 50.0 output.frequency.nominal: 50 output.voltage: 224.4 output.voltage.nominal: 220 ups.beeper.status: enabled ups.delay.shutdown: 30 ups.delay.start: 180 ups.firmware.aux: PM-V ups.load: 18 ups.productid: 5161 ups.status: OL ups.type: offline / line interactive ups.vendorid: 0665 upsrw output: Current debug verbosity level of the driver program Type: NUMBER Value: 0 [driver.flag.allow_killpower] Safety flip-switch to allow the driver daemon to send UPS shutdown command (accessible via driver.killpower) Type: NUMBER Value: 0 [ups.delay.shutdown] Interval to wait after shutdown with delay command (seconds) Type: RANGE NUMBER Option: "12-540" SELECTED [ups.delay.start] Interval to wait before (re)starting the load (seconds)Type: RANGE NUMBER Option: "60-599940" SELECTED I have tested the shutdown sequence. Here is the website:https://www.powermatic.co.th/product/l-series/ The website is in Thai, but Google Translate does a pretty good job of translating the site to English Cheers, Arnold Troeger Sent with[Proton Mail](https://proton.me/mail/home)secure email. Cheers, Arnold Troeger Sent with [Proton Mail](https://proton.me/mail/home) secure email. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://alioth-lists.debian.net/pipermail/nut-upsdev/attachments/20240925/b3115af4/attachment.htm>