thr3ads.net - Nouveau - [Nouveau] [PATCH mesa v2 1/2] nouveau: codegen: Use FILE_MEMORY

If this information is useful, please help other people find it:
Share via:

Hans de Goede

2016-Apr-12 10:04 UTC

[Nouveau] [PATCH mesa v2 1/2] nouveau: codegen: Use FILE_MEMORY_BUFFER for buffers

Hi,

On 08-04-16 18:14, Samuel Pitoiset wrote:>
>
> On 04/08/2016 12:17 PM, Hans de Goede wrote:
>> Hi,
>>
>> On 23-03-16 23:10, Samuel Pitoiset wrote:
>>> Are you sure this won't break compute shaders on fermi?
>>> Could you please double-check that?
>>
>> I just checked:
>>
>> lspci:
>> 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT
>> 610] (rev a1)
>>
>> Before this patch-set:
>>
>> [hans at plank piglit]$ ./piglit run -o shader -t
>> '.*arb_shader_storage_buffer_object.*' results/shader
>> [9/9] pass: 9 /
>>
>> After this patch-set:
>>
>> [hans at plank piglit]$ ./piglit run -o shader -t
>> '.*arb_shader_storage_buffer_object.*' results/shader
>> [9/9] pass: 9 /
>
> And what about compute shaders? (ie. -t arb_compute_shader)
> Sorry to ask you again but I just want to be sure it's fine. :-)
Those tests don't run yet on mesa master on the GF119 card
I've:

[hans at plank piglit]$ ./piglit run -o shader -t
'.*arb_compute_shader.*' results/shader
[20/20] skip: 20 |

My patches don't change anything about this, and they only touch
the buffer handling paths and the buffer tests (still) pass...

I've also tried on a:
01:00.0 VGA compatible controller: NVIDIA Corporation GK107 [GeForce GT 740]
(rev a1)

Same result.

Regards,

Hans


>
>>
>>> One minor comment below.
>>>
>>> On 03/17/2016 05:07 PM, Hans de Goede wrote:
>>>> Some of the lowering steps we currently do for
FILE_MEMORY_GLOBAL only
>>>> apply to buffers, making it impossible to use
FILE_MEMORY_GLOBAL for
>>>> OpenCL global buffers.
>>>>
>>>> This commits changes the buffer code to use FILE_MEMORY_BUFFER
at the
>>>> ir_from_tgsi and lowering steps, freeing use of
FILE_MEMORY_GLOBAL
>>>> for use with OpenCL global buffers.
>>>>
>>>> Note that after lowering buffer accesses use the
FILE_MEMORY_GLOBAL
>>>> register file.
>>>>
>>>> Tested with piglet on a gk107, before this patch:
>>>> ./piglit run -o shader -t
'.*arb_shader_storage_buffer_object.*'
>>>> results/shader
>>>> [9/9] pass: 9 /
>>>> after:
>>>> ./piglit run -o shader -t
'.*arb_shader_storage_buffer_object.*'
>>>> results/shader
>>>> [9/9] pass: 9 /
>>>>
>>>> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
>>>> ---
>>>> Changes in v2:
>>>> -New patch in v2 of patch-set to re-enable support for global
opencl
>>>> buffers
>>>> ---
>>>>   src/gallium/drivers/nouveau/codegen/nv50_ir.h                
| 1 +
>>>>   src/gallium/drivers/nouveau/codegen/nv50_ir_from_tgsi.cpp    
| 2 +-
>>>>   src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nvc0.cpp
| 8
>>>> +++++---
>>>>   src/gallium/drivers/nouveau/codegen/nv50_ir_print.cpp        
| 1 +
>>>>   src/gallium/drivers/nouveau/codegen/nv50_ir_target_nv50.cpp  
| 5
>>>> ++++-
>>>>   src/gallium/drivers/nouveau/codegen/nv50_ir_target_nvc0.cpp  
| 1 +
>>>>   6 files changed, 13 insertions(+), 5 deletions(-)
>>>>
>>>> diff --git a/src/gallium/drivers/nouveau/codegen/nv50_ir.h
>>>> b/src/gallium/drivers/nouveau/codegen/nv50_ir.h
>>>> index 7b0eb2f..5141fc6 100644
>>>> --- a/src/gallium/drivers/nouveau/codegen/nv50_ir.h
>>>> +++ b/src/gallium/drivers/nouveau/codegen/nv50_ir.h
>>>> @@ -332,6 +332,7 @@ enum DataFile
>>>>      FILE_MEMORY_CONST,
>>>>      FILE_SHADER_INPUT,
>>>>      FILE_SHADER_OUTPUT,
>>>> +   FILE_MEMORY_BUFFER,
>>>>      FILE_MEMORY_GLOBAL,
>>>>      FILE_MEMORY_SHARED,
>>>>      FILE_MEMORY_LOCAL,
>>>> diff --git
>>>> a/src/gallium/drivers/nouveau/codegen/nv50_ir_from_tgsi.cpp
>>>> b/src/gallium/drivers/nouveau/codegen/nv50_ir_from_tgsi.cpp
>>>> index baa2e30..7ae0cb2 100644
>>>> --- a/src/gallium/drivers/nouveau/codegen/nv50_ir_from_tgsi.cpp
>>>> +++ b/src/gallium/drivers/nouveau/codegen/nv50_ir_from_tgsi.cpp
>>>> @@ -373,7 +373,7 @@ static nv50_ir::DataFile translateFile(uint
file)
>>>>      case TGSI_FILE_PREDICATE:       return
nv50_ir::FILE_PREDICATE;
>>>>      case TGSI_FILE_IMMEDIATE:       return
nv50_ir::FILE_IMMEDIATE;
>>>>      case TGSI_FILE_SYSTEM_VALUE:    return
nv50_ir::FILE_SYSTEM_VALUE;
>>>> -   case TGSI_FILE_BUFFER:          return
nv50_ir::FILE_MEMORY_GLOBAL;
>>>> +   case TGSI_FILE_BUFFER:          return
nv50_ir::FILE_MEMORY_BUFFER;
>>>>      case TGSI_FILE_MEMORY:          return
nv50_ir::FILE_MEMORY_GLOBAL;
>>>>      case TGSI_FILE_SAMPLER:
>>>>      case TGSI_FILE_NULL:
>>>> diff --git
>>>> a/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nvc0.cpp
>>>> b/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nvc0.cpp
>>>> index d0936d8..628deb7 100644
>>>> ---
a/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nvc0.cpp
>>>> +++
b/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nvc0.cpp
>>>> @@ -1141,13 +1141,14 @@
NVC0LoweringPass::handleATOM(Instruction *atom)
>>>>         handleSharedATOM(atom);
>>>>         return true;
>>>>      default:
>>>> -      assert(atom->src(0).getFile() == FILE_MEMORY_GLOBAL);
>>>> +      assert(atom->src(0).getFile() == FILE_MEMORY_BUFFER);
>>>>         base = loadResInfo64(ind,
atom->getSrc(0)->reg.fileIndex * 16);
>>>>         assert(base->reg.size == 8);
>>>>         if (ptr)
>>>>            base = bld.mkOp2v(OP_ADD, TYPE_U64, base, base,
ptr);
>>>>         assert(base->reg.size == 8);
>>>>         atom->setIndirect(0, 0, base);
>>>> +      atom->getSrc(0)->reg.file = FILE_MEMORY_GLOBAL;
>>>>         return true;
>>>>      }
>>>>      base >>>> @@ -1963,7 +1964,7 @@
NVC0LoweringPass::visit(Instruction *i)
>>>>         } else if (i->src(0).getFile() ==
FILE_SHADER_OUTPUT) {
>>>>            assert(prog->getType() =>>>>
Program::TYPE_TESSELLATION_CONTROL);
>>>>            i->op = OP_VFETCH;
>>>> -      } else if (i->src(0).getFile() == FILE_MEMORY_GLOBAL)
{
>>>> +      } else if (i->src(0).getFile() == FILE_MEMORY_BUFFER)
{
>>>>            Value *ind = i->getIndirect(0, 1);
>>>>            Value *ptr = loadResInfo64(ind,
>>>> i->getSrc(0)->reg.fileIndex * 16);
>>>>            // XXX come up with a way not to do this for EVERY
little
>>>> access but
>>>> @@ -1978,6 +1979,7 @@ NVC0LoweringPass::visit(Instruction *i)
>>>>            }
>>>>            i->setIndirect(0, 1, NULL);
>>>>            i->setIndirect(0, 0, ptr);
>>>> +         i->getSrc(0)->reg.file = FILE_MEMORY_GLOBAL;
>>>>            bld.mkCmp(OP_SET, CC_GT, TYPE_U32, pred, TYPE_U32,
offset,
>>>> length);
>>>>            i->setPredicate(CC_NOT_P, pred);
>>>>            if (i->defExists(0)) {
>>>> @@ -1987,7 +1989,7 @@ NVC0LoweringPass::visit(Instruction *i)
>>>>         break;
>>>>      case OP_ATOM:
>>>>      {
>>>> -      const bool cctl = i->src(0).getFile() ==
FILE_MEMORY_GLOBAL;
>>>> +      const bool cctl = i->src(0).getFile() ==
FILE_MEMORY_BUFFER;
>>>>         handleATOM(i);
>>>>         handleCasExch(i, cctl);
>>>>      }
>>>> diff --git
a/src/gallium/drivers/nouveau/codegen/nv50_ir_print.cpp
>>>> b/src/gallium/drivers/nouveau/codegen/nv50_ir_print.cpp
>>>> index cfa85ec..870b36e 100644
>>>> --- a/src/gallium/drivers/nouveau/codegen/nv50_ir_print.cpp
>>>> +++ b/src/gallium/drivers/nouveau/codegen/nv50_ir_print.cpp
>>>> @@ -455,6 +455,7 @@ int Symbol::print(char *buf, size_t size,
>>>>      case FILE_MEMORY_CONST:  c = 'c'; break;
>>>>      case FILE_SHADER_INPUT:  c = 'a'; break;
>>>>      case FILE_SHADER_OUTPUT: c = 'o'; break;
>>>> +   case FILE_MEMORY_BUFFER: c = 'b'; break; // Only
used before
>>>> lowering
>>>
>>> Could you please show me the output of NV50_PROG_DEBUG=255 with a
test
>>> which uses this file type? I'm not sure if using b[] is better
than
>>> g[] actually.
>>
>> NV50_PROG_DEBUG=255 bin/arb_shader_storage_buffer_object-rendering
>>
>> ...
>>
>> MAIN:-1 ()
>> BB:0 (52 instructions) - df = { }
>>   -> BB:1 (tree)
>>    0: mov u32 %r1 0x00000000 (0)
>>    1: ld  u32 %r0 b[0x0] (0)
>>    2: presin f32 %r3 %r0 (0)
>>    3: cos f32 %r3 %r3 (0)
>>    4: mov u32 %r2 %r3 (0)
>>    ...
>>
>> And after the first lowering step:
>>
>> MAIN:-1 ()
>> BB:0 (77 instructions) - df = { }
>>   -> BB:1 (tree)
>>    0: mov u32 %r56 0x00000000 (0)
>>    1: ld  u64 %r57d c15[0x300] (0)
>>    2: mov u32 %r58 0x00000004 (0)
>>    3: ld  u32 %r59 c15[0x308] (0)
>>    4: set u8 %p60 gt u32 %r58 %r59 (0)
>>    5: mov u32 %r61 0x00000000 (0)
>>    6: not %p60 ld  u32 %r62 g[%r57d+0x0] (0)
>>    ...
>>
>> Note how the 'b' printing is only used before the buffer access
>> is lowered to a global access, so this seems to be the right thing
todo.
>>
>
> Fine by me.
> Thanks.
>
>> Regards,
>>
>> Hans
>>
>>
>>>
>>>>      case FILE_MEMORY_GLOBAL: c = 'g'; break;
>>>>      case FILE_MEMORY_SHARED: c = 's'; break;
>>>>      case FILE_MEMORY_LOCAL:  c = 'l'; break;
>>>> diff --git
>>>> a/src/gallium/drivers/nouveau/codegen/nv50_ir_target_nv50.cpp
>>>> b/src/gallium/drivers/nouveau/codegen/nv50_ir_target_nv50.cpp
>>>> index 2c4d7f5..2af1715 100644
>>>> ---
a/src/gallium/drivers/nouveau/codegen/nv50_ir_target_nv50.cpp
>>>> +++
b/src/gallium/drivers/nouveau/codegen/nv50_ir_target_nv50.cpp
>>>> @@ -207,6 +207,7 @@ TargetNV50::getFileSize(DataFile file)
const
>>>>      case FILE_MEMORY_CONST:  return 65536;
>>>>      case FILE_SHADER_INPUT:  return 0x200;
>>>>      case FILE_SHADER_OUTPUT: return 0x200;
>>>> +   case FILE_MEMORY_BUFFER: return 0xffffffff;
>>>>      case FILE_MEMORY_GLOBAL: return 0xffffffff;
>>>>      case FILE_MEMORY_SHARED: return 16 << 10;
>>>>      case FILE_MEMORY_LOCAL:  return 48 << 10;
>>>> @@ -406,7 +407,8 @@ TargetNV50::isAccessSupported(DataFile
file,
>>>> DataType ty) const
>>>>      if (ty == TYPE_B96 || ty == TYPE_NONE)
>>>>         return false;
>>>>      if (typeSizeof(ty) > 4)
>>>> -      return (file == FILE_MEMORY_LOCAL) || (file
=>>>> FILE_MEMORY_GLOBAL);
>>>> +      return (file == FILE_MEMORY_LOCAL) || (file
=>>>> FILE_MEMORY_GLOBAL) ||
>>>> +             (file == FILE_MEMORY_BUFFER);
>>>>      return true;
>>>>   }
>>>>
>>>> @@ -509,6 +511,7 @@ int TargetNV50::getLatency(const
Instruction *i)
>>>> const
>>>>         switch (i->src(0).getFile()) {
>>>>         case FILE_MEMORY_LOCAL:
>>>>         case FILE_MEMORY_GLOBAL:
>>>> +      case FILE_MEMORY_BUFFER:
>>>>            return 100; // really 400 to 800
>>>>         default:
>>>>            return 22;
>>>> diff --git
>>>> a/src/gallium/drivers/nouveau/codegen/nv50_ir_target_nvc0.cpp
>>>> b/src/gallium/drivers/nouveau/codegen/nv50_ir_target_nvc0.cpp
>>>> index a03afa8..9e1e7bf 100644
>>>> ---
a/src/gallium/drivers/nouveau/codegen/nv50_ir_target_nvc0.cpp
>>>> +++
b/src/gallium/drivers/nouveau/codegen/nv50_ir_target_nvc0.cpp
>>>> @@ -248,6 +248,7 @@ TargetNVC0::getFileSize(DataFile file)
const
>>>>      case FILE_MEMORY_CONST:  return 65536;
>>>>      case FILE_SHADER_INPUT:  return 0x400;
>>>>      case FILE_SHADER_OUTPUT: return 0x400;
>>>> +   case FILE_MEMORY_BUFFER: return 0xffffffff;
>>>>      case FILE_MEMORY_GLOBAL: return 0xffffffff;
>>>>      case FILE_MEMORY_SHARED: return 16 << 10;
>>>>      case FILE_MEMORY_LOCAL:  return 48 << 10;
>>>>

Samuel Pitoiset

2016-Apr-14 22:29 UTC

head link

[Nouveau] [PATCH mesa v2 1/2] nouveau: codegen: Use FILE_MEMORY_BUFFER for buffers

On 04/12/2016 12:04 PM, Hans de Goede wrote:> Hi,
>
> On 08-04-16 18:14, Samuel Pitoiset wrote:
>>
>>
>> On 04/08/2016 12:17 PM, Hans de Goede wrote:
>>> Hi,
>>>
>>> On 23-03-16 23:10, Samuel Pitoiset wrote:
>>>> Are you sure this won't break compute shaders on fermi?
>>>> Could you please double-check that?
>>>
>>> I just checked:
>>>
>>> lspci:
>>> 01:00.0 VGA compatible controller: NVIDIA Corporation GF119
[GeForce GT
>>> 610] (rev a1)
>>>
>>> Before this patch-set:
>>>
>>> [hans at plank piglit]$ ./piglit run -o shader -t
>>> '.*arb_shader_storage_buffer_object.*' results/shader
>>> [9/9] pass: 9 /
>>>
>>> After this patch-set:
>>>
>>> [hans at plank piglit]$ ./piglit run -o shader -t
>>> '.*arb_shader_storage_buffer_object.*' results/shader
>>> [9/9] pass: 9 /
>>
>> And what about compute shaders? (ie. -t arb_compute_shader)
>> Sorry to ask you again but I just want to be sure it's fine. :-)
>
> Those tests don't run yet on mesa master on the GF119 card
> I've:
>
> [hans at plank piglit]$ ./piglit run -o shader -t
'.*arb_compute_shader.*'
> results/shader
> [20/20] skip: 20 |
>
> My patches don't change anything about this, and they only touch
> the buffer handling paths and the buffer tests (still) pass...
>
> I've also tried on a:
> 01:00.0 VGA compatible controller: NVIDIA Corporation GK107 [GeForce GT
> 740] (rev a1)
>
> Same result.
Sorry for the delay, I was dealing with images.

Well, you needed to override ARB_compute_shader because the extension is 
not currently exposed.

For example:
MESA_EXTENSION_OVERRIDE=GL_ARB_compute_shader 
MESA_GL_VERSION_OVERRIDE=4.2 ./piglit-run.py blabla

I tried myself to test your series but it no longer applies on top of 
master. Well, if you make a quick test with:

MESA_EXTENSION_OVERRIDE=GL_ARB_compute_shader 
MESA_GL_VERSION_OVERRIDE=4.2 ./piglit-run.py -1 --dmesg -t 
arb_compute_shader

that might be nice, but whatever, series is:

Reviewed-by: Samuel Pitoiset <samuel.pitoiset at gmail.com>
>
> Regards,
>
> Hans
>
>
>
>>
>>>
>>>> One minor comment below.
>>>>
>>>> On 03/17/2016 05:07 PM, Hans de Goede wrote:
>>>>> Some of the lowering steps we currently do for
FILE_MEMORY_GLOBAL only
>>>>> apply to buffers, making it impossible to use
FILE_MEMORY_GLOBAL for
>>>>> OpenCL global buffers.
>>>>>
>>>>> This commits changes the buffer code to use
FILE_MEMORY_BUFFER at the
>>>>> ir_from_tgsi and lowering steps, freeing use of
FILE_MEMORY_GLOBAL
>>>>> for use with OpenCL global buffers.
>>>>>
>>>>> Note that after lowering buffer accesses use the
FILE_MEMORY_GLOBAL
>>>>> register file.
>>>>>
>>>>> Tested with piglet on a gk107, before this patch:
>>>>> ./piglit run -o shader -t
'.*arb_shader_storage_buffer_object.*'
>>>>> results/shader
>>>>> [9/9] pass: 9 /
>>>>> after:
>>>>> ./piglit run -o shader -t
'.*arb_shader_storage_buffer_object.*'
>>>>> results/shader
>>>>> [9/9] pass: 9 /
>>>>>
>>>>> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
>>>>> ---
>>>>> Changes in v2:
>>>>> -New patch in v2 of patch-set to re-enable support for
global opencl
>>>>> buffers
>>>>> ---
>>>>>   src/gallium/drivers/nouveau/codegen/nv50_ir.h            
| 1 +
>>>>>   src/gallium/drivers/nouveau/codegen/nv50_ir_from_tgsi.cpp
| 2 +-
>>>>>  
src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nvc0.cpp | 8
>>>>> +++++---
>>>>>   src/gallium/drivers/nouveau/codegen/nv50_ir_print.cpp    
| 1 +
>>>>>  
src/gallium/drivers/nouveau/codegen/nv50_ir_target_nv50.cpp   | 5
>>>>> ++++-
>>>>>  
src/gallium/drivers/nouveau/codegen/nv50_ir_target_nvc0.cpp   | 1 +
>>>>>   6 files changed, 13 insertions(+), 5 deletions(-)
>>>>>
>>>>> diff --git a/src/gallium/drivers/nouveau/codegen/nv50_ir.h
>>>>> b/src/gallium/drivers/nouveau/codegen/nv50_ir.h
>>>>> index 7b0eb2f..5141fc6 100644
>>>>> --- a/src/gallium/drivers/nouveau/codegen/nv50_ir.h
>>>>> +++ b/src/gallium/drivers/nouveau/codegen/nv50_ir.h
>>>>> @@ -332,6 +332,7 @@ enum DataFile
>>>>>      FILE_MEMORY_CONST,
>>>>>      FILE_SHADER_INPUT,
>>>>>      FILE_SHADER_OUTPUT,
>>>>> +   FILE_MEMORY_BUFFER,
>>>>>      FILE_MEMORY_GLOBAL,
>>>>>      FILE_MEMORY_SHARED,
>>>>>      FILE_MEMORY_LOCAL,
>>>>> diff --git
>>>>> a/src/gallium/drivers/nouveau/codegen/nv50_ir_from_tgsi.cpp
>>>>> b/src/gallium/drivers/nouveau/codegen/nv50_ir_from_tgsi.cpp
>>>>> index baa2e30..7ae0cb2 100644
>>>>> ---
a/src/gallium/drivers/nouveau/codegen/nv50_ir_from_tgsi.cpp
>>>>> +++
b/src/gallium/drivers/nouveau/codegen/nv50_ir_from_tgsi.cpp
>>>>> @@ -373,7 +373,7 @@ static nv50_ir::DataFile
translateFile(uint file)
>>>>>      case TGSI_FILE_PREDICATE:       return
nv50_ir::FILE_PREDICATE;
>>>>>      case TGSI_FILE_IMMEDIATE:       return
nv50_ir::FILE_IMMEDIATE;
>>>>>      case TGSI_FILE_SYSTEM_VALUE:    return
>>>>> nv50_ir::FILE_SYSTEM_VALUE;
>>>>> -   case TGSI_FILE_BUFFER:          return
>>>>> nv50_ir::FILE_MEMORY_GLOBAL;
>>>>> +   case TGSI_FILE_BUFFER:          return
>>>>> nv50_ir::FILE_MEMORY_BUFFER;
>>>>>      case TGSI_FILE_MEMORY:          return
>>>>> nv50_ir::FILE_MEMORY_GLOBAL;
>>>>>      case TGSI_FILE_SAMPLER:
>>>>>      case TGSI_FILE_NULL:
>>>>> diff --git
>>>>>
a/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nvc0.cpp
>>>>>
b/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nvc0.cpp
>>>>> index d0936d8..628deb7 100644
>>>>> ---
a/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nvc0.cpp
>>>>> +++
b/src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nvc0.cpp
>>>>> @@ -1141,13 +1141,14 @@
NVC0LoweringPass::handleATOM(Instruction
>>>>> *atom)
>>>>>         handleSharedATOM(atom);
>>>>>         return true;
>>>>>      default:
>>>>> -      assert(atom->src(0).getFile() ==
FILE_MEMORY_GLOBAL);
>>>>> +      assert(atom->src(0).getFile() ==
FILE_MEMORY_BUFFER);
>>>>>         base = loadResInfo64(ind,
atom->getSrc(0)->reg.fileIndex *
>>>>> 16);
>>>>>         assert(base->reg.size == 8);
>>>>>         if (ptr)
>>>>>            base = bld.mkOp2v(OP_ADD, TYPE_U64, base, base,
ptr);
>>>>>         assert(base->reg.size == 8);
>>>>>         atom->setIndirect(0, 0, base);
>>>>> +      atom->getSrc(0)->reg.file =
FILE_MEMORY_GLOBAL;
>>>>>         return true;
>>>>>      }
>>>>>      base >>>>> @@ -1963,7 +1964,7 @@
NVC0LoweringPass::visit(Instruction *i)
>>>>>         } else if (i->src(0).getFile() ==
FILE_SHADER_OUTPUT) {
>>>>>            assert(prog->getType() =>>>>>
Program::TYPE_TESSELLATION_CONTROL);
>>>>>            i->op = OP_VFETCH;
>>>>> -      } else if (i->src(0).getFile() ==
FILE_MEMORY_GLOBAL) {
>>>>> +      } else if (i->src(0).getFile() ==
FILE_MEMORY_BUFFER) {
>>>>>            Value *ind = i->getIndirect(0, 1);
>>>>>            Value *ptr = loadResInfo64(ind,
>>>>> i->getSrc(0)->reg.fileIndex * 16);
>>>>>            // XXX come up with a way not to do this for
EVERY little
>>>>> access but
>>>>> @@ -1978,6 +1979,7 @@ NVC0LoweringPass::visit(Instruction
*i)
>>>>>            }
>>>>>            i->setIndirect(0, 1, NULL);
>>>>>            i->setIndirect(0, 0, ptr);
>>>>> +         i->getSrc(0)->reg.file =
FILE_MEMORY_GLOBAL;
>>>>>            bld.mkCmp(OP_SET, CC_GT, TYPE_U32, pred,
TYPE_U32, offset,
>>>>> length);
>>>>>            i->setPredicate(CC_NOT_P, pred);
>>>>>            if (i->defExists(0)) {
>>>>> @@ -1987,7 +1989,7 @@ NVC0LoweringPass::visit(Instruction
*i)
>>>>>         break;
>>>>>      case OP_ATOM:
>>>>>      {
>>>>> -      const bool cctl = i->src(0).getFile() ==
FILE_MEMORY_GLOBAL;
>>>>> +      const bool cctl = i->src(0).getFile() ==
FILE_MEMORY_BUFFER;
>>>>>         handleATOM(i);
>>>>>         handleCasExch(i, cctl);
>>>>>      }
>>>>> diff --git
a/src/gallium/drivers/nouveau/codegen/nv50_ir_print.cpp
>>>>> b/src/gallium/drivers/nouveau/codegen/nv50_ir_print.cpp
>>>>> index cfa85ec..870b36e 100644
>>>>> --- a/src/gallium/drivers/nouveau/codegen/nv50_ir_print.cpp
>>>>> +++ b/src/gallium/drivers/nouveau/codegen/nv50_ir_print.cpp
>>>>> @@ -455,6 +455,7 @@ int Symbol::print(char *buf, size_t
size,
>>>>>      case FILE_MEMORY_CONST:  c = 'c'; break;
>>>>>      case FILE_SHADER_INPUT:  c = 'a'; break;
>>>>>      case FILE_SHADER_OUTPUT: c = 'o'; break;
>>>>> +   case FILE_MEMORY_BUFFER: c = 'b'; break; //
Only used before
>>>>> lowering
>>>>
>>>> Could you please show me the output of NV50_PROG_DEBUG=255 with
a test
>>>> which uses this file type? I'm not sure if using b[] is
better than
>>>> g[] actually.
>>>
>>> NV50_PROG_DEBUG=255 bin/arb_shader_storage_buffer_object-rendering
>>>
>>> ...
>>>
>>> MAIN:-1 ()
>>> BB:0 (52 instructions) - df = { }
>>>   -> BB:1 (tree)
>>>    0: mov u32 %r1 0x00000000 (0)
>>>    1: ld  u32 %r0 b[0x0] (0)
>>>    2: presin f32 %r3 %r0 (0)
>>>    3: cos f32 %r3 %r3 (0)
>>>    4: mov u32 %r2 %r3 (0)
>>>    ...
>>>
>>> And after the first lowering step:
>>>
>>> MAIN:-1 ()
>>> BB:0 (77 instructions) - df = { }
>>>   -> BB:1 (tree)
>>>    0: mov u32 %r56 0x00000000 (0)
>>>    1: ld  u64 %r57d c15[0x300] (0)
>>>    2: mov u32 %r58 0x00000004 (0)
>>>    3: ld  u32 %r59 c15[0x308] (0)
>>>    4: set u8 %p60 gt u32 %r58 %r59 (0)
>>>    5: mov u32 %r61 0x00000000 (0)
>>>    6: not %p60 ld  u32 %r62 g[%r57d+0x0] (0)
>>>    ...
>>>
>>> Note how the 'b' printing is only used before the buffer
access
>>> is lowered to a global access, so this seems to be the right thing
todo.
>>>
>>
>> Fine by me.
>> Thanks.
>>
>>> Regards,
>>>
>>> Hans
>>>
>>>
>>>>
>>>>>      case FILE_MEMORY_GLOBAL: c = 'g'; break;
>>>>>      case FILE_MEMORY_SHARED: c = 's'; break;
>>>>>      case FILE_MEMORY_LOCAL:  c = 'l'; break;
>>>>> diff --git
>>>>>
a/src/gallium/drivers/nouveau/codegen/nv50_ir_target_nv50.cpp
>>>>>
b/src/gallium/drivers/nouveau/codegen/nv50_ir_target_nv50.cpp
>>>>> index 2c4d7f5..2af1715 100644
>>>>> ---
a/src/gallium/drivers/nouveau/codegen/nv50_ir_target_nv50.cpp
>>>>> +++
b/src/gallium/drivers/nouveau/codegen/nv50_ir_target_nv50.cpp
>>>>> @@ -207,6 +207,7 @@ TargetNV50::getFileSize(DataFile file)
const
>>>>>      case FILE_MEMORY_CONST:  return 65536;
>>>>>      case FILE_SHADER_INPUT:  return 0x200;
>>>>>      case FILE_SHADER_OUTPUT: return 0x200;
>>>>> +   case FILE_MEMORY_BUFFER: return 0xffffffff;
>>>>>      case FILE_MEMORY_GLOBAL: return 0xffffffff;
>>>>>      case FILE_MEMORY_SHARED: return 16 << 10;
>>>>>      case FILE_MEMORY_LOCAL:  return 48 << 10;
>>>>> @@ -406,7 +407,8 @@ TargetNV50::isAccessSupported(DataFile
file,
>>>>> DataType ty) const
>>>>>      if (ty == TYPE_B96 || ty == TYPE_NONE)
>>>>>         return false;
>>>>>      if (typeSizeof(ty) > 4)
>>>>> -      return (file == FILE_MEMORY_LOCAL) || (file
=>>>>> FILE_MEMORY_GLOBAL);
>>>>> +      return (file == FILE_MEMORY_LOCAL) || (file
=>>>>> FILE_MEMORY_GLOBAL) ||
>>>>> +             (file == FILE_MEMORY_BUFFER);
>>>>>      return true;
>>>>>   }
>>>>>
>>>>> @@ -509,6 +511,7 @@ int TargetNV50::getLatency(const
Instruction *i)
>>>>> const
>>>>>         switch (i->src(0).getFile()) {
>>>>>         case FILE_MEMORY_LOCAL:
>>>>>         case FILE_MEMORY_GLOBAL:
>>>>> +      case FILE_MEMORY_BUFFER:
>>>>>            return 100; // really 400 to 800
>>>>>         default:
>>>>>            return 22;
>>>>> diff --git
>>>>>
a/src/gallium/drivers/nouveau/codegen/nv50_ir_target_nvc0.cpp
>>>>>
b/src/gallium/drivers/nouveau/codegen/nv50_ir_target_nvc0.cpp
>>>>> index a03afa8..9e1e7bf 100644
>>>>> ---
a/src/gallium/drivers/nouveau/codegen/nv50_ir_target_nvc0.cpp
>>>>> +++
b/src/gallium/drivers/nouveau/codegen/nv50_ir_target_nvc0.cpp
>>>>> @@ -248,6 +248,7 @@ TargetNVC0::getFileSize(DataFile file)
const
>>>>>      case FILE_MEMORY_CONST:  return 65536;
>>>>>      case FILE_SHADER_INPUT:  return 0x400;
>>>>>      case FILE_SHADER_OUTPUT: return 0x400;
>>>>> +   case FILE_MEMORY_BUFFER: return 0xffffffff;
>>>>>      case FILE_MEMORY_GLOBAL: return 0xffffffff;
>>>>>      case FILE_MEMORY_SHARED: return 16 << 10;
>>>>>      case FILE_MEMORY_LOCAL:  return 48 << 10;
>>>>>

Hans de Goede

2016-Apr-20 11:48 UTC

head link

[Nouveau] [PATCH mesa v2 1/2] nouveau: codegen: Use FILE_MEMORY_BUFFER for buffers

Hi,

On 15-04-16 00:29, Samuel Pitoiset wrote:>
>
> On 04/12/2016 12:04 PM, Hans de Goede wrote:
>> Hi,
>>
>> On 08-04-16 18:14, Samuel Pitoiset wrote:
>>>
>>>
>>> On 04/08/2016 12:17 PM, Hans de Goede wrote:
>>>> Hi,
>>>>
>>>> On 23-03-16 23:10, Samuel Pitoiset wrote:
>>>>> Are you sure this won't break compute shaders on fermi?
>>>>> Could you please double-check that?
>>>>
>>>> I just checked:
>>>>
>>>> lspci:
>>>> 01:00.0 VGA compatible controller: NVIDIA Corporation GF119
[GeForce GT
>>>> 610] (rev a1)
>>>>
>>>> Before this patch-set:
>>>>
>>>> [hans at plank piglit]$ ./piglit run -o shader -t
>>>> '.*arb_shader_storage_buffer_object.*' results/shader
>>>> [9/9] pass: 9 /
>>>>
>>>> After this patch-set:
>>>>
>>>> [hans at plank piglit]$ ./piglit run -o shader -t
>>>> '.*arb_shader_storage_buffer_object.*' results/shader
>>>> [9/9] pass: 9 /
>>>
>>> And what about compute shaders? (ie. -t arb_compute_shader)
>>> Sorry to ask you again but I just want to be sure it's fine.
:-)
>>
>> Those tests don't run yet on mesa master on the GF119 card
>> I've:
>>
>> [hans at plank piglit]$ ./piglit run -o shader -t
'.*arb_compute_shader.*'
>> results/shader
>> [20/20] skip: 20 |
>>
>> My patches don't change anything about this, and they only touch
>> the buffer handling paths and the buffer tests (still) pass...
>>
>> I've also tried on a:
>> 01:00.0 VGA compatible controller: NVIDIA Corporation GK107 [GeForce GT
>> 740] (rev a1)
>>
>> Same result.
>
> Sorry for the delay, I was dealing with images.
>
> Well, you needed to override ARB_compute_shader because the extension is
not currently exposed.
>
> For example:
> MESA_EXTENSION_OVERRIDE=GL_ARB_compute_shader MESA_GL_VERSION_OVERRIDE=4.2
./piglit-run.py blabla
>
> I tried myself to test your series but it no longer applies on top of
master. Well, if you make a quick test with:
>
> MESA_EXTENSION_OVERRIDE=GL_ARB_compute_shader MESA_GL_VERSION_OVERRIDE=4.2
./piglit-run.py -1 --dmesg -t arb_compute_shader
>
> that might be nice
Done on both a gf119 and gk107, result on both:

[hans at plank piglit]$ DISPLAY=:0 MESA_EXTENSION_OVERRIDE=GL_ARB_compute_shader
MESA_GL_VERSION_OVERRIDE=4.2  ./piglit run -o shader -t
'.*arb_compute_shader.*' results/shader
[20/20] skip: 4, pass: 16 |
Thank you for running Piglit!

 > but whatever, series is:>
> Reviewed-by: Samuel Pitoiset <samuel.pitoiset at gmail.com>
Thanks, I've updated the commit msg with the results of the extra tests
I've done and pushed these 2 patches to master.

Regards,

Hans

Possibly Parallel Threads

Search for more reasonably related threads

Nouveau - Apr 2016 - [PATCH mesa v2 1/2] nouveau: codegen: Use FILE_MEMORY_BUFFER for buffers

[Nouveau] [PATCH mesa v2 1/2] nouveau: codegen: Use FILE_MEMORY_BUFFER for buffers

[Nouveau] [PATCH mesa v2 1/2] nouveau: codegen: Use FILE_MEMORY_BUFFER for buffers

[Nouveau] [PATCH mesa v2 1/2] nouveau: codegen: Use FILE_MEMORY_BUFFER for buffers

Possibly Parallel Threads