thr3ads.net - Nouveau - [Nouveau] [5/5] ARM: tegra: jetson-tk1: enable GK20A GPU [Sep 2014]

If this information is useful, please help other people find it:
Share via:

Alexandre Courbot

2014-May-19 09:24 UTC

[Nouveau] [PATCH 0/5] drm/nouveau: platform devices and GK20A probing

This patch series is the final (?) step towards the initial support of GK20A,
allowing it to be probed and used (currently at a very slow speed, and for
offscreen rendering only) on the Jetson TK1 and Venice 2 boards.

The main piece if the first patch which adds platform devices probing support
to Nouveau. There are probably lots of things that need to be discussed about
it, e.g.:

* The way the DRM device is created, especially with respect to the ongoing
  changes to the DRM framework,
* The fact that the same drm_driver instance is used for the PCI and platform
  drivers,
* Whether we should have only one platform driver capable of probing all
  platform devices, or one driver per GPU (in this case, where should all these
  drivers reside?)

So there are still some rough edges, but we are getting there. :)

The first patch should go through the Nouveau tree, while the 4 others are
rather intended for Tegra.

Alexandre Courbot (3):
  drm/nouveau: support for probing platform devices
  ARM: tegra: of: add GK20A device tree binding
  ARM: tegra: jetson-tk1: enable GK20A GPU

Thierry Reding (2):
  ARM: tegra: add GK20A GPU to Tegra124 DT
  ARM: tegra: venice2: enable GK20A GPU

 .../devicetree/bindings/gpu/nvidia,gk20a.txt       |  45 +++++
 arch/arm/boot/dts/tegra124-jetson-tk1.dts          |   8 +-
 arch/arm/boot/dts/tegra124-venice2.dts             |   8 +-
 arch/arm/boot/dts/tegra124.dtsi                    |  15 ++
 drivers/gpu/drm/nouveau/Kconfig                    |   8 +
 drivers/gpu/drm/nouveau/Makefile                   |   3 +
 drivers/gpu/drm/nouveau/nouveau_drm.c              |  33 ++--
 drivers/gpu/drm/nouveau/nouveau_drm.h              |  21 +++
 drivers/gpu/drm/nouveau/nouveau_platform.c         | 191 +++++++++++++++++++++
 9 files changed, 315 insertions(+), 17 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
 create mode 100644 drivers/gpu/drm/nouveau/nouveau_platform.c

-- 
1.9.2

Alexandre Courbot

2014-May-19 09:24 UTC

head link

[Nouveau] [PATCH 1/5] drm/nouveau: support for probing platform devices

Add a platform driver for Nouveau devices declared using the device tree
or platform data. This driver currently supports GK20A on Tegra
platforms and is only compiled for these platforms if Nouveau is
enabled.

Nouveau will probe the chip type itself using the BOOT0 register, so all
this driver really needs to do is to make sure the module is powered and
its clocks active before calling nouveau_drm_platform_probe().

Heavily based on work done by Thierry Reding.

Signed-off-by: Thierry Reding <treding at nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot at nvidia.com>
---
 drivers/gpu/drm/nouveau/Kconfig            |   8 ++
 drivers/gpu/drm/nouveau/Makefile           |   3 +
 drivers/gpu/drm/nouveau/nouveau_drm.c      |  33 ++---
 drivers/gpu/drm/nouveau/nouveau_drm.h      |  21 ++++
 drivers/gpu/drm/nouveau/nouveau_platform.c | 191 +++++++++++++++++++++++++++++
 5 files changed, 241 insertions(+), 15 deletions(-)
 create mode 100644 drivers/gpu/drm/nouveau/nouveau_platform.c

diff --git a/drivers/gpu/drm/nouveau/Kconfig b/drivers/gpu/drm/nouveau/Kconfig
index 637c29a33127..b8834ad55eb8 100644
--- a/drivers/gpu/drm/nouveau/Kconfig
+++ b/drivers/gpu/drm/nouveau/Kconfig
@@ -25,6 +25,14 @@ config DRM_NOUVEAU
 	help
 	  Choose this option for open-source nVidia support.
 
+config NOUVEAU_PLATFORM_DRIVER
+	bool
+	depends on DRM_NOUVEAU
+	default y if ARCH_TEGRA
+	help
+	 Support for Nouveau platform driver, used for integrated GPUs as found
+	 on NVIDIA Tegra K1.
+
 config NOUVEAU_DEBUG
 	int "Maximum debug level"
 	depends on DRM_NOUVEAU
diff --git a/drivers/gpu/drm/nouveau/Makefile b/drivers/gpu/drm/nouveau/Makefile
index 1aaa2ef577d9..45b17b6b1b59 100644
--- a/drivers/gpu/drm/nouveau/Makefile
+++ b/drivers/gpu/drm/nouveau/Makefile
@@ -331,6 +331,9 @@ nouveau-y += nv50_display.o
 # drm/pm
 nouveau-y += nouveau_hwmon.o nouveau_sysfs.o
 
+# platform driver
+nouveau-$(CONFIG_NOUVEAU_PLATFORM_DRIVER) += nouveau_platform.o
+
 # other random bits
 nouveau-$(CONFIG_COMPAT) += nouveau_ioc32.o
 ifdef CONFIG_X86
diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c
b/drivers/gpu/drm/nouveau/nouveau_drm.c
index ddd83756b9a2..1538d0004e6e 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -359,6 +359,9 @@ nouveau_drm_load(struct drm_device *dev, unsigned long
flags)
 
 	dev->dev_private = drm;
 	drm->dev = dev;
+	if (dev->platformdev)
+		platform_set_drvdata(dev->platformdev, dev);
+
 	nouveau_client(drm)->debug = nouveau_dbgopt(nouveau_debug,
"DRM");
 
 	INIT_LIST_HEAD(&drm->clients);
@@ -1003,23 +1006,19 @@ nouveau_drm_pci_driver = {
 	.driver.pm = &nouveau_pm_ops,
 };
 
-int nouveau_drm_platform_probe(struct platform_device *pdev)
+int nouveau_drm_platform_device_create(struct platform_device *pdev, int
length,
+				       void **pobject)
 {
-	struct nouveau_device *device;
-	int ret;
-
-	ret = nouveau_device_create(pdev, NOUVEAU_BUS_PLATFORM,
-				    nouveau_platform_name(pdev),
-				    dev_name(&pdev->dev), nouveau_config,
-				    nouveau_debug, &device);
-
-	ret = drm_platform_init(&driver, pdev);
-	if (ret) {
-		nouveau_object_ref(NULL, (struct nouveau_object **)&device);
-		return ret;
-	}
+	return nouveau_device_create_(pdev, NOUVEAU_BUS_PLATFORM,
+				      nouveau_platform_name(pdev),
+				      dev_name(&pdev->dev),
+				      nouveau_config, nouveau_debug, length,
+				      pobject);
+}
 
-	return ret;
+int nouveau_drm_platform_device_init(struct platform_device *pdev)
+{
+	return drm_platform_init(&driver, pdev);
 }
 
 static int __init
@@ -1035,6 +1034,8 @@ nouveau_drm_init(void)
 	if (!nouveau_modeset)
 		return 0;
 
+	nouveau_platform_driver_init();
+
 	nouveau_register_dsm_handler();
 	return drm_pci_init(&driver, &nouveau_drm_pci_driver);
 }
@@ -1047,6 +1048,8 @@ nouveau_drm_exit(void)
 
 	drm_pci_exit(&driver, &nouveau_drm_pci_driver);
 	nouveau_unregister_dsm_handler();
+
+	nouveau_platform_driver_exit();
 }
 
 module_init(nouveau_drm_init);
diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.h
b/drivers/gpu/drm/nouveau/nouveau_drm.h
index 7efbafaf7c1d..178f8cfb148c 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drm.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.h
@@ -157,6 +157,27 @@ nouveau_dev(struct drm_device *dev)
 int nouveau_pmops_suspend(struct device *);
 int nouveau_pmops_resume(struct device *);
 
+int nouveau_drm_platform_device_create(struct platform_device *, int, void **);
+int nouveau_drm_platform_device_init(struct platform_device *);
+
+#if IS_ENABLED(CONFIG_NOUVEAU_PLATFORM_DRIVER)
+
+int nouveau_platform_driver_init(void);
+void nouveau_platform_driver_exit(void);
+
+#else
+
+static inline int nouveau_platform_driver_init(void)
+{
+	return 0;
+}
+
+static inline void nouveau_platform_driver_exit(void)
+{
+}
+
+#endif
+
 #define NV_FATAL(cli, fmt, args...) nv_fatal((cli), fmt, ##args)
 #define NV_ERROR(cli, fmt, args...) nv_error((cli), fmt, ##args)
 #define NV_WARN(cli, fmt, args...) nv_warn((cli), fmt, ##args)
diff --git a/drivers/gpu/drm/nouveau/nouveau_platform.c
b/drivers/gpu/drm/nouveau/nouveau_platform.c
new file mode 100644
index 000000000000..0d55e04c816a
--- /dev/null
+++ b/drivers/gpu/drm/nouveau/nouveau_platform.c
@@ -0,0 +1,191 @@
+/*
+ * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
"Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/reset.h>
+#include <linux/regulator/consumer.h>
+#include <linux/tegra-powergate.h>
+
+#include "engine/device.h"
+#include "nouveau_drm.h"
+
+struct nouveau_platform_gpu {
+	struct nouveau_device device;
+
+	struct reset_control *rst;
+	struct clk *clk;
+	struct clk *clk_pll;
+
+	struct regulator *vdd;
+};
+
+#define nv_device_to_gpu(d) container_of(d, struct nouveau_platform_gpu,
device)
+
+static int nouveau_platform_power_up(struct nouveau_platform_gpu *gpu)
+{
+	int err;
+
+	reset_control_assert(gpu->rst);
+
+	err = regulator_enable(gpu->vdd);
+	if (err)
+		goto err_power;
+
+	err = clk_prepare_enable(gpu->clk);
+	if (err)
+		goto err_clk;
+
+	udelay(10);
+	err = tegra_powergate_remove_clamping(TEGRA_POWERGATE_3D);
+	if (err)
+		goto err_clamp;
+
+	udelay(10);
+	reset_control_deassert(gpu->rst);
+
+	return 0;
+
+err_clamp:
+	clk_disable_unprepare(gpu->clk);
+err_clk:
+	regulator_disable(gpu->vdd);
+err_power:
+	return err;
+}
+
+static int nouveau_platform_power_down(struct nouveau_platform_gpu *gpu)
+{
+	int err;
+
+	clk_disable_unprepare(gpu->clk);
+
+	err = regulator_disable(gpu->vdd);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int nouveau_platform_probe(struct platform_device *pdev)
+{
+	struct nouveau_platform_gpu *gpu;
+	struct regulator *vdd;
+	struct reset_control *rst;
+	struct clk *clk, *pll;
+	int err;
+
+	/*
+	 * get the resources we need before we allocate the device' memory
+	 * in case we need to return -EPROBE_DEFER
+	 */
+	vdd = devm_regulator_get(&pdev->dev, "vdd");
+	if (IS_ERR(vdd))
+		return PTR_ERR(vdd);
+
+	rst = devm_reset_control_get(&pdev->dev, "gpu");
+	if (IS_ERR(rst))
+		return PTR_ERR(rst);
+
+	clk = devm_clk_get(&pdev->dev, "gpu");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	pll = devm_clk_get(&pdev->dev, "pll");
+	if (IS_ERR(pll))
+		return PTR_ERR(pll);
+
+	err = nouveau_drm_platform_device_create(pdev, sizeof(*gpu),
+						 (void **)&gpu);
+	if (err)
+		return err;
+
+	gpu->vdd = vdd;
+	gpu->rst = rst;
+	gpu->clk = clk;
+	gpu->clk_pll = pll;
+
+	err = nouveau_platform_power_up(gpu);
+	if (err)
+		goto err_probe;
+
+	err = nouveau_drm_platform_device_init(pdev);
+	if (err)
+		goto err_probe;
+
+	return 0;
+
+err_probe:
+	nouveau_object_ref(NULL, (struct nouveau_object **)&gpu->device);
+	return err;
+}
+
+static int nouveau_platform_remove(struct platform_device *pdev)
+{
+	struct drm_device *drm_dev = platform_get_drvdata(pdev);
+	struct nouveau_device *device = nouveau_dev(drm_dev);
+	struct nouveau_platform_gpu *gpu = nv_device_to_gpu(device);
+	int err;
+
+	drm_dev->irq_enabled = false;
+	drm_put_dev(drm_dev);
+
+	err = nouveau_platform_power_down(gpu);
+	if (err)
+		return err;
+
+	nouveau_object_ref(NULL, (struct nouveau_object **)&device);
+	nouveau_object_debug();
+
+	return 0;
+}
+
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id nouveau_platform_match[] = {
+	{ .compatible = "nvidia,gk20a" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, nouveau_platform_match);
+#endif
+
+struct platform_driver nouveau_platform_driver = {
+	.driver = {
+		.name = "nouveau",
+		.of_match_table = of_match_ptr(nouveau_platform_match),
+	},
+	.probe = nouveau_platform_probe,
+	.remove = nouveau_platform_remove,
+};
+
+int __init nouveau_platform_driver_init(void)
+{
+	return platform_driver_register(&nouveau_platform_driver);
+}
+
+void __exit nouveau_platform_driver_exit(void)
+{
+	platform_driver_unregister(&nouveau_platform_driver);
+}
-- 
1.9.2

Alexandre Courbot

2014-May-19 09:24 UTC

head link

[Nouveau] [PATCH 2/5] ARM: tegra: of: add GK20A device tree binding

Add the device tree binding documentation for the GK20A GPU used in
Tegra K1 SoCs.

Signed-off-by: Alexandre Courbot <acourbot at nvidia.com>
---
 .../devicetree/bindings/gpu/nvidia,gk20a.txt       | 45 ++++++++++++++++++++++
 1 file changed, 45 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt

diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
new file mode 100644
index 000000000000..eda04c963af0
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
@@ -0,0 +1,45 @@
+NVIDIA GK20A Graphics Processing Unit
+
+Required properties:
+- compatible: "nvidia,<chip>-<gpu>"
+  Currently recognized values:
+  - nvidia,tegra124-gk20a
+- reg: Physical base address and length of the controller's registers.
+  Must contain two entries:
+  - first entry for bar0
+  - second entry for bar1
+- interrupts: The interrupt outputs from the controller.
+- interrupt-names: Must include the following entries:
+  - stall
+  - nonstall
+- vdd-supply: regulator for supply voltage.
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - gpu
+  - pll
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - gpu
+
+Example:
+
+/ {
+	gpu at 0,57000000 {
+		compatible = "nvidia,gk20a";
+		reg = <0x0 0x57000000 0x0 0x01000000>,
+		      <0x0 0x58000000 0x0 0x01000000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		vdd-supply = <&vdd_gpu>;
+		clocks = <&tegra_car TEGRA124_CLK_GPU>,
+			 <&tegra_car TEGRA124_CLK_PLL_P_OUT5>;
+		clock-names = "gpu", "pll";
+		resets = <&tegra_car 184>;
+		reset-names = "gpu";
+		status = "disabled";
+	};
+
+};
-- 
1.9.2

Alexandre Courbot

2014-May-19 09:24 UTC

head link

[Nouveau] [PATCH 3/5] ARM: tegra: add GK20A GPU to Tegra124 DT

From: Thierry Reding <treding at nvidia.com>

Add the GK20A device node to Tegra124's device tree.

Signed-off-by: Thierry Reding <treding at nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot at nvidia.com>
---
 arch/arm/boot/dts/tegra124.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 6e6bc4e8185c..0bccd6af81d6 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -102,6 +102,21 @@
 			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
+	gpu at 0,57000000 {
+		compatible = "nvidia,gk20a";
+		reg = <0x0 0x57000000 0x0 0x01000000>,
+		      <0x0 0x58000000 0x0 0x01000000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		clocks = <&tegra_car TEGRA124_CLK_GPU>,
+			 <&tegra_car TEGRA124_CLK_PLL_P_OUT5>;
+		clock-names = "gpu", "pll";
+		resets = <&tegra_car 184>;
+		reset-names = "gpu";
+		status = "disabled";
+	};
+
 	timer at 0,60005000 {
 		compatible = "nvidia,tegra124-timer",
"nvidia,tegra20-timer";
 		reg = <0x0 0x60005000 0x0 0x400>;
-- 
1.9.2

Alexandre Courbot

2014-May-19 09:24 UTC

head link

[Nouveau] [PATCH 4/5] ARM: tegra: venice2: enable GK20A GPU

From: Thierry Reding <treding at nvidia.com>

Signed-off-by: Thierry Reding <treding at nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot at nvidia.com>
---
 arch/arm/boot/dts/tegra124-venice2.dts | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/tegra124-venice2.dts
b/arch/arm/boot/dts/tegra124-venice2.dts
index f0bb84244025..86970ee48707 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -42,6 +42,12 @@
 		};
 	};
 
+	gpu at 0,57000000 {
+		status = "okay";
+
+		vdd-supply = <&vdd_gpu>;
+	};
+
 	pinmux: pinmux at 0,70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinmux_default>;
@@ -726,7 +732,7 @@
 					regulator-always-on;
 				};
 
-				sd6 {
+				vdd_gpu: sd6 {
 					regulator-name = "+VDD_GPU_AP";
 					regulator-min-microvolt = <650000>;
 					regulator-max-microvolt = <1200000>;
-- 
1.9.2

Alexandre Courbot

2014-May-19 09:24 UTC

head link

[Nouveau] [PATCH 5/5] ARM: tegra: jetson-tk1: enable GK20A GPU

Signed-off-by: Alexandre Courbot <acourbot at nvidia.com>
---
 arch/arm/boot/dts/tegra124-jetson-tk1.dts | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index e31fb61a81d3..15a194d1277f 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -30,6 +30,12 @@
 		};
 	};
 
+	gpu at 0,57000000 {
+		status = "okay";
+
+		vdd-supply = <&vdd_gpu>;
+	};
+
 	pinmux: pinmux at 0,70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -1505,7 +1511,7 @@
 					regulator-always-on;
 				};
 
-				sd6 {
+				vdd_gpu: sd6 {
 					regulator-name = "+VDD_GPU_AP";
 					regulator-min-microvolt = <650000>;
 					regulator-max-microvolt = <1200000>;
-- 
1.9.2

Lucas Stach

2014-May-19 10:04 UTC

head link

[Nouveau] [PATCH 0/5] drm/nouveau: platform devices and GK20A probing

Am Montag, den 19.05.2014, 18:24 +0900 schrieb Alexandre
Courbot:> This patch series is the final (?) step towards the initial support of
GK20A,
> allowing it to be probed and used (currently at a very slow speed, and for
> offscreen rendering only) on the Jetson TK1 and Venice 2 boards.
> This seem to still need external firmware. Any chance to get this into
linux-firmware?

Regards,
Lucas> The main piece if the first patch which adds platform devices probing
support
> to Nouveau. There are probably lots of things that need to be discussed
about
> it, e.g.:
> 
> * The way the DRM device is created, especially with respect to the ongoing
>   changes to the DRM framework,
> * The fact that the same drm_driver instance is used for the PCI and
platform
>   drivers,
> * Whether we should have only one platform driver capable of probing all
>   platform devices, or one driver per GPU (in this case, where should all
these
>   drivers reside?)
> 
> So there are still some rough edges, but we are getting there. :)
> 
> The first patch should go through the Nouveau tree, while the 4 others are
> rather intended for Tegra.
> 
> Alexandre Courbot (3):
>   drm/nouveau: support for probing platform devices
>   ARM: tegra: of: add GK20A device tree binding
>   ARM: tegra: jetson-tk1: enable GK20A GPU
> 
> Thierry Reding (2):
>   ARM: tegra: add GK20A GPU to Tegra124 DT
>   ARM: tegra: venice2: enable GK20A GPU
> 
>  .../devicetree/bindings/gpu/nvidia,gk20a.txt       |  45 +++++
>  arch/arm/boot/dts/tegra124-jetson-tk1.dts          |   8 +-
>  arch/arm/boot/dts/tegra124-venice2.dts             |   8 +-
>  arch/arm/boot/dts/tegra124.dtsi                    |  15 ++
>  drivers/gpu/drm/nouveau/Kconfig                    |   8 +
>  drivers/gpu/drm/nouveau/Makefile                   |   3 +
>  drivers/gpu/drm/nouveau/nouveau_drm.c              |  33 ++--
>  drivers/gpu/drm/nouveau/nouveau_drm.h              |  21 +++
>  drivers/gpu/drm/nouveau/nouveau_platform.c         | 191
+++++++++++++++++++++
>  9 files changed, 315 insertions(+), 17 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
>  create mode 100644 drivers/gpu/drm/nouveau/nouveau_platform.c
> 
-- 
Pengutronix e.K.             | Lucas Stach                 |
Industrial Linux Solutions   | http://www.pengutronix.de/  |

Thierry Reding

2014-May-19 10:06 UTC

head link

[Nouveau] [PATCH 0/5] drm/nouveau: platform devices and GK20A probing

On Mon, May 19, 2014 at 12:04:28PM +0200, Lucas Stach
wrote:> Am Montag, den 19.05.2014, 18:24 +0900 schrieb Alexandre Courbot:
> > This patch series is the final (?) step towards the initial support of
GK20A,
> > allowing it to be probed and used (currently at a very slow speed, and
for
> > offscreen rendering only) on the Jetson TK1 and Venice 2 boards.
> > 
> This seem to still need external firmware. Any chance to get this into
> linux-firmware?
I think that should be possible. There didn't seem to be any objections
last time I asked but let me clarify again and get back to you.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL:
<http://lists.freedesktop.org/archives/nouveau/attachments/20140519/3baba6dc/attachment.sig>

Stephen Warren

2014-May-19 21:14 UTC

head link

[Nouveau] [PATCH 2/5] ARM: tegra: of: add GK20A device tree binding

On 05/19/2014 03:24 AM, Alexandre Courbot wrote:> Add the device tree binding documentation for the GK20A GPU used in
> Tegra K1 SoCs.
A few minor nits, but otherwise,
Acked-by: Stephen Warren <swarren at nvidia.com>
> diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
> +Required properties:
> +- compatible: "nvidia,<chip>-<gpu>"
> +  Currently recognized values:
> +  - nvidia,tegra124-gk20a
> +- reg: Physical base address and length of the controller's registers.
> +  Must contain two entries:
> +  - first entry for bar0
> +  - second entry for bar1
> +- interrupts: The interrupt outputs from the controller.
To be consistent with the clocks and resets properties, it'd be nice to
reword that as:

interrupts: Must contain an entry for each entry in interrupt-names.
> +- interrupt-names: Must include the following entries:
... and add the following here:

See ../interrupt-controller/interrupts.txt
> +/ {
No need to wrap a root node around this in the example.
> +	gpu at 0,57000000 {
...> +	};
> +
Extra blank line here.
> +};

Stephen Warren

2014-May-19 21:16 UTC

head link

[Nouveau] [PATCH 3/5] ARM: tegra: add GK20A GPU to Tegra124 DT

On 05/19/2014 03:24 AM, Alexandre Courbot wrote:> From: Thierry Reding <treding at nvidia.com>
> 
> Add the GK20A device node to Tegra124's device tree.
At a quick glance, patches 3-5 look fine too. I'll hold off on applying
them until patches 1-2 have been applied to the DRM/... tree.

Sjoerd Simons

2014-Sep-25 13:27 UTC

head link

[Nouveau] [5/5] ARM: tegra: jetson-tk1: enable GK20A GPU

Playing a bit with todays linux-next on my jetson, it seems this patch is
still required for enabling the GPU. Is there anything blocking it (firmware
not available yet in liux-firmware?)

On Mon, May 19, 2014 at 06:24:10PM +0900, Alexandre Courbot
wrote:> Signed-off-by: Alexandre Courbot <acourbot at nvidia.com>
> ---
>  arch/arm/boot/dts/tegra124-jetson-tk1.dts | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> index e31fb61a81d3..15a194d1277f 100644
> --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> @@ -30,6 +30,12 @@
>  		};
>  	};
>  
> +	gpu at 0,57000000 {
> +		status = "okay";
> +
> +		vdd-supply = <&vdd_gpu>;
> +	};
> +
>  	pinmux: pinmux at 0,70000868 {
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&state_default>;
> @@ -1505,7 +1511,7 @@
>  					regulator-always-on;
>  				};
>  
> -				sd6 {
> +				vdd_gpu: sd6 {
>  					regulator-name = "+VDD_GPU_AP";
>  					regulator-min-microvolt = <650000>;
>  					regulator-max-microvolt = <1200000>;
-- 
If you put it off long enough, it might go away.

Reasonably Related Threads

Search for more possibly parallel threads

Nouveau - Sep 2014 - [5/5] ARM: tegra: jetson-tk1: enable GK20A GPU

[Nouveau] [PATCH 0/5] drm/nouveau: platform devices and GK20A probing

[Nouveau] [PATCH 1/5] drm/nouveau: support for probing platform devices

[Nouveau] [PATCH 2/5] ARM: tegra: of: add GK20A device tree binding

[Nouveau] [PATCH 3/5] ARM: tegra: add GK20A GPU to Tegra124 DT

[Nouveau] [PATCH 4/5] ARM: tegra: venice2: enable GK20A GPU

[Nouveau] [PATCH 5/5] ARM: tegra: jetson-tk1: enable GK20A GPU

[Nouveau] [PATCH 0/5] drm/nouveau: platform devices and GK20A probing

[Nouveau] [PATCH 0/5] drm/nouveau: platform devices and GK20A probing

[Nouveau] [PATCH 2/5] ARM: tegra: of: add GK20A device tree binding

[Nouveau] [PATCH 3/5] ARM: tegra: add GK20A GPU to Tegra124 DT

[Nouveau] [5/5] ARM: tegra: jetson-tk1: enable GK20A GPU

Reasonably Related Threads