Nouveau - Feb 2014 - [PATCH] nouveau/drm/fifo: fix ENG_RUNLIST register address

Address of the ENG_RUNLIST register should be 0x002284 + (engine * 8),
not 0x002284 + (engine * 4).

Signed-off-by: Alexandre Courbot <acourbot at nvidia.com>
---
Stumbled upon this one and I'm quite certain the offset was not correct.
This is inconsequential for GK20A which only features one runlist, but
other GPUs might run into troubles because of this. Not tested, just
reported for your consideration.

FWIW, the Android GK20A driver uses the same offset calculation.

 drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c
b/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c
index 99c9dee..dbc3ff6 100644
--- a/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c
+++ b/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c
@@ -112,7 +112,7 @@ nve0_fifo_runlist_update(struct nve0_fifo_priv *priv, u32
engine)
 
 	nv_wr32(priv, 0x002270, cur->addr >> 12);
 	nv_wr32(priv, 0x002274, (engine << 20) | (p >> 3));
-	if (!nv_wait(priv, 0x002284 + (engine * 4), 0x00100000, 0x00000000))
+	if (!nv_wait(priv, 0x002284 + (engine * 8), 0x00100000, 0x00000000))
 		nv_error(priv, "runlist %d update timeout\n", engine);
 	mutex_unlock(&nv_subdev(priv)->mutex);
 }
-- 
1.8.5.3

On Fri, Feb 7, 2014 at 11:22 PM, Alexandre Courbot <acourbot at
nvidia.com> wrote:
> Address of the ENG_RUNLIST register should be 0x002284 + (engine * 8),
> not 0x002284 + (engine * 4).
>
> Signed-off-by: Alexandre Courbot <acourbot at nvidia.com>
> ---
> Stumbled upon this one and I'm quite certain the offset was not
correct.
> This is inconsequential for GK20A which only features one runlist, but
> other GPUs might run into troubles because of this. Not tested, just
> reported for your consideration.
I noticed this also while doing some other work I haven't committed
yet.  I'll push this patch ahead of that other work though.

Thanks,
Ben.
>
> FWIW, the Android GK20A driver uses the same offset calculation.
>
>  drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c
b/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c
> index 99c9dee..dbc3ff6 100644
> --- a/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c
> +++ b/drivers/gpu/drm/nouveau/core/engine/fifo/nve0.c
> @@ -112,7 +112,7 @@ nve0_fifo_runlist_update(struct nve0_fifo_priv *priv,
u32 engine)
>
>         nv_wr32(priv, 0x002270, cur->addr >> 12);
>         nv_wr32(priv, 0x002274, (engine << 20) | (p >> 3));
> -       if (!nv_wait(priv, 0x002284 + (engine * 4), 0x00100000,
0x00000000))
> +       if (!nv_wait(priv, 0x002284 + (engine * 8), 0x00100000,
0x00000000))
>                 nv_error(priv, "runlist %d update timeout\n",
engine);
>         mutex_unlock(&nv_subdev(priv)->mutex);
>  }
> --
> 1.8.5.3
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel