Luca Barbieri
2010-Jan-16 14:27 UTC
[Nouveau] [PATCH] drm/nouveau: Acknowledge DMA_VTX_PROTECTION PGRAPH interrupts
Currently Nouveau is unable to dismiss DMA_VTX_PROTECTION errors, which results in an infinite loop in the interrupt handler. These errors are caused both by bugs in the Gallium driver and by user-specified index buffers with out of bounds indices. By mmio-tracing the nVidia drivers, I found out how this is done. On DMA_VTX_PROTECTION, The nVidia driver reads the register 0x402000, always getting the value 4, and then writes 4 back to 0x402000. This patch adds that logic by reading 0x402000 and writing the same value back. It's unclear what should happen if the value read is not 4, and the current approach might not be the correct one. To test this, modify mesa/progs/trivial/vbo-drawrange.c, defining ELTOBJ to 1 and replacing indices with huge out of bounds integers. Without this patch, the GPU and/or kernel should lock up. With this patch, it should misrender as expected but not lock up. The errors are still logged since they are useful for development. This has been tested on NV49 and may not work on other cards. To find out how things work on other cards, run the aforementioned test using the blob with mmiotrace and grep for a read of the PGRAPH source register. Signed-off-by: Luca Barbieri <luca at luca-barbieri.com> --- drivers/gpu/drm/nouveau/nouveau_irq.c | 9 ++++++++- 1 files changed, 8 insertions(+), 1 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_irq.c b/drivers/gpu/drm/nouveau/nouveau_irq.c index 919a619..14de5a1 100644 --- a/drivers/gpu/drm/nouveau/nouveau_irq.c +++ b/drivers/gpu/drm/nouveau/nouveau_irq.c @@ -483,9 +483,16 @@ nouveau_pgraph_intr_error(struct drm_device *dev, uint32_t nsource) if (nsource & NV03_PGRAPH_NSOURCE_ILLEGAL_MTHD) { if (nouveau_pgraph_intr_swmthd(dev, &trap)) unhandled = 1; - } else { + } else if(nsource & NV03_PGRAPH_NSOURCE_DMA_VTX_PROTECTION) { + uint32_t v = nv_rd32(dev, 0x402000); + nv_wr32(dev, 0x402000, v); + + /* dump the error anyway for now: it's useful for + Gallium development */ unhandled = 1; } + else + unhandled = 1; if (unhandled && nouveau_ratelimit()) nouveau_graph_dump_trap_info(dev, "PGRAPH_ERROR", &trap); -- 1.6.3.3
Francisco Jerez
2010-Jan-17 18:16 UTC
[Nouveau] [PATCH] drm/nouveau: Acknowledge DMA_VTX_PROTECTION PGRAPH interrupts
Luca Barbieri <luca at luca-barbieri.com> writes:> Currently Nouveau is unable to dismiss DMA_VTX_PROTECTION errors, > which results in an infinite loop in the interrupt handler. > > These errors are caused both by bugs in the Gallium driver and by > user-specified index buffers with out of bounds indices. > > By mmio-tracing the nVidia drivers, I found out how this is done. > On DMA_VTX_PROTECTION, The nVidia driver reads the register 0x402000, > always getting the value 4, and then writes 4 back to 0x402000. > > This patch adds that logic by reading 0x402000 and writing the same > value back. > It's unclear what should happen if the value read is not 4, and > the current approach might not be the correct one. > > To test this, modify mesa/progs/trivial/vbo-drawrange.c, defining > ELTOBJ to 1 and replacing indices with huge out of bounds integers. > > Without this patch, the GPU and/or kernel should lock up. > With this patch, it should misrender as expected but not lock up. > > The errors are still logged since they are useful for development. > > This has been tested on NV49 and may not work on other cards. > > To find out how things work on other cards, run the aforementioned > test using the blob with mmiotrace and grep for a read of the PGRAPH > source register. > > Signed-off-by: Luca Barbieri <luca at luca-barbieri.com> > --- > drivers/gpu/drm/nouveau/nouveau_irq.c | 9 ++++++++- > 1 files changed, 8 insertions(+), 1 deletions(-) > > diff --git a/drivers/gpu/drm/nouveau/nouveau_irq.c b/drivers/gpu/drm/nouveau/nouveau_irq.c > index 919a619..14de5a1 100644 > --- a/drivers/gpu/drm/nouveau/nouveau_irq.c > +++ b/drivers/gpu/drm/nouveau/nouveau_irq.c > @@ -483,9 +483,16 @@ nouveau_pgraph_intr_error(struct drm_device *dev, uint32_t nsource) > if (nsource & NV03_PGRAPH_NSOURCE_ILLEGAL_MTHD) { > if (nouveau_pgraph_intr_swmthd(dev, &trap)) > unhandled = 1; > - } else { > + } else if(nsource & NV03_PGRAPH_NSOURCE_DMA_VTX_PROTECTION) { > + uint32_t v = nv_rd32(dev, 0x402000); > + nv_wr32(dev, 0x402000, v); > + > + /* dump the error anyway for now: it's useful for > + Gallium development */ > unhandled = 1; > } > + else > + unhandled = 1; > > if (unhandled && nouveau_ratelimit()) > nouveau_graph_dump_trap_info(dev, "PGRAPH_ERROR", &trap);Both pushed. Thanks! -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 197 bytes Desc: not available Url : http://lists.freedesktop.org/archives/nouveau/attachments/20100117/c66b7e74/attachment.pgp
Reasonably Related Threads
- [PATCH 2/2 V2] drm/nv50: Improve PGRAPH interrupt handling.
- [PATCH 1/2] drm/nv50: Make ctxprog wait until interrupt handler is done.
- git - compile error ratelimit - missing include <linux/ratelimit.h>
- [PATCH] drm/nouveau: don't hold spin lock while calling kzalloc with GFP_KERNEL
- [Bug 102430] New: nv4x - memory problems when starting graphical application - logs included