Annie Cherkaev via llvm-dev
2018-Jul-11 16:32 UTC
[llvm-dev] static stack depth analysis tool
Hello llvm-dev!
We are currently building a tool using LLVM which statically computes the
worst-case stack depth for programs whose call-graphs are statically
constrained. While this task is undecidable for general programs, we
specifically plan to use it to analyze all entry points into Zircon’s
kernel and the vDSO.
Currently, without such a tool, the best option for allocating kernel
memory in Zircon is taking a best guess of a conservative overestimate of
the memory required. This is problematic, however, because allocating too
much memory wastes valuable, highly limited RAM, and allocating too little
memory can result in stack overflows, which lead to catastrophic system
failure. This tool will eliminate the guesswork by reporting the smallest
amount of memory that is sufficient for all possible executions within the
kernel.
We would appreciate feedback on our approach, and would like to hear if
anyone else has use-cases for such a tool. Below are some implementation
details, followed by some Zircon-specific details.
Implementation details:
This tool will perform the stack depth analysis by extracting the call
graph and the stack frame sizes from LLVM in two late passes, scheduled
just before codegen. A modulePass will write a dictionary of function names
to the list of called functions, and a machineFunctionPass will write a
dictionary of function names to their stack sizes. A script can then use
these dictionaries to annotate the call graph with the stack sizes by
matching up function names, and use this annotated call graph to find the
execution path with the largest stack.
Backends: We plan to support the x86-64 and aarch64 architectures; adding
other architectures should be straight-forward.
Fancy stacks: We plan to support using SafeStack & ShadowCallStack.
Hand-written assembly: The Zircon codebase contains a nontrivial amount of
hand-written assembly which uses stack space. We will manually audit the
stack usage of assembly code, and provide it to the analysis in a lookup
table.
Indirect Function Calls & Recursion: We hope to not run into too many call
graph complications in our codebase, refactor those which we do run into,
and add this tool into the build system to enforce that future code is
amenable to this analysis. We currently don’t plan on implementing any
additional analysis which LLVM does not already have.
Testing: We’ll validate the correctness of the tool through unit testing,
end-to-end testing and ideally also fuzz testing. We can set up fuzz
testing by instrumenting the source code to dynamically monitor the stack
size-- for instance by inlining assembly to report the stack pointer-- and
comparing that result to the value the tool computes statically. While this
wouldn’t validate that the tool is reporting stack sizes precisely, it
would give us a way to automatically check that the true stack frame size
reported by the dynamic check (which is the stack size for *some* execution
path) is no larger than the worst-case stack size reported by the static
tool.
Zircon-specific details:
Interrupts:
An executing thread can be temporarily halted by an interrupt, which will
execute code on the stack of the thread it paused. This means to ensure we
find what the true worst-case stack is, we need to model the case where an
interrupt occurs while the function is at its deepest stack depth. Some
interrupts can interrupt other interrupts, therefore to accurately model
worst-case stack depth we need to build a model of how interrupts may
execute in x86-64 and aarch64, and treat them as additional entry points
which are called by every leaf function.
Motivation for analyzing stack usage in the vDSO:
In Zircon, syscalls are exposed through the vDSO (virtual Dynamic Shared
Object). The vDSO is an interface which is like a shared library object,
except it is provided by the OS instead of existing as a literal file. If a
process has permission to make syscalls then the vDSO is mapped into its
memory space, and it can dynamically link against syscalls the same way it
would any other shared library object. The vDSO requires a certain amount
of stack space to safely complete any syscall, and that amount is part of
the system’s ABI contract with user code. Currently, however, that amount
is unknown, undocumented and unenforced; this tool will allow us to analyze
the amount of stack space currently implemented syscalls use, document the
amount that will be contractually required by the ABI, and enforce that
future syscalls do not exceed that amount.
Please let us know if you have any comments or suggestions about the
implementation, and if you have a project that could benefit from such a
tool.
Thanks!
Annie Cherkaev
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.llvm.org/pipermail/llvm-dev/attachments/20180711/974568cd/attachment-0001.html>
I have written such a (naïve) tool in the past to do this. I started with this
script ( https://github.com/spotify/linux/blob/master/scripts/checkstack.pl )
and evolved it from there.
Basically, I parsed the assembly. The results were not perfectly accurate, but
they were very useful. I was able to “handle” indirect calls and recursion, for
some definition of “handle”.
I think the main value in doing something inside of the LLVM ecosystem is to get
(some) indirect call information. One of the security mitigations (CFI?)
already needs to figure out the set of possible targets for an indirect call.
If you can get access to that information, you can provide much more complete
call stacks. My scripts in the past have only “handled” indirect calls by
noting that a caller had X number of indirect callees. For recursion, I picked
a canonical recursion path, took one cycle of recursion, and reported that
number, along with a flag in the report to say that recursion was involved.
My python scripts for x86, x86_64, and armv5 total all of about 29 kb, so it
wasn’t hard. Exact byte accuracy, including path dependency, interrupts, and
fancy stacks will, of course, bloat that.
From: llvm-dev <llvm-dev-bounces at lists.llvm.org> On Behalf Of Annie
Cherkaev via llvm-dev
Sent: Wednesday, July 11, 2018 11:32 AM
To: llvm-dev at lists.llvm.org
Subject: [llvm-dev] static stack depth analysis tool
Hello llvm-dev!
We are currently building a tool using LLVM which statically computes the
worst-case stack depth for programs whose call-graphs are statically
constrained. While this task is undecidable for general programs, we
specifically plan to use it to analyze all entry points into Zircon’s kernel and
the vDSO.
Currently, without such a tool, the best option for allocating kernel memory in
Zircon is taking a best guess of a conservative overestimate of the memory
required. This is problematic, however, because allocating too much memory
wastes valuable, highly limited RAM, and allocating too little memory can result
in stack overflows, which lead to catastrophic system failure. This tool will
eliminate the guesswork by reporting the smallest amount of memory that is
sufficient for all possible executions within the kernel.
We would appreciate feedback on our approach, and would like to hear if anyone
else has use-cases for such a tool. Below are some implementation details,
followed by some Zircon-specific details.
Implementation details:
This tool will perform the stack depth analysis by extracting the call graph and
the stack frame sizes from LLVM in two late passes, scheduled just before
codegen. A modulePass will write a dictionary of function names to the list of
called functions, and a machineFunctionPass will write a dictionary of function
names to their stack sizes. A script can then use these dictionaries to annotate
the call graph with the stack sizes by matching up function names, and use this
annotated call graph to find the execution path with the largest stack.
Backends: We plan to support the x86-64 and aarch64 architectures; adding other
architectures should be straight-forward.
Fancy stacks: We plan to support using SafeStack & ShadowCallStack.
Hand-written assembly: The Zircon codebase contains a nontrivial amount of
hand-written assembly which uses stack space. We will manually audit the stack
usage of assembly code, and provide it to the analysis in a lookup table.
Indirect Function Calls & Recursion: We hope to not run into too many call
graph complications in our codebase, refactor those which we do run into, and
add this tool into the build system to enforce that future code is amenable to
this analysis. We currently don’t plan on implementing any additional analysis
which LLVM does not already have.
Testing: We’ll validate the correctness of the tool through unit testing,
end-to-end testing and ideally also fuzz testing. We can set up fuzz testing by
instrumenting the source code to dynamically monitor the stack size-- for
instance by inlining assembly to report the stack pointer-- and comparing that
result to the value the tool computes statically. While this wouldn’t validate
that the tool is reporting stack sizes precisely, it would give us a way to
automatically check that the true stack frame size reported by the dynamic check
(which is the stack size for *some* execution path) is no larger than the
worst-case stack size reported by the static tool.
Zircon-specific details:
Interrupts:
An executing thread can be temporarily halted by an interrupt, which will
execute code on the stack of the thread it paused. This means to ensure we find
what the true worst-case stack is, we need to model the case where an interrupt
occurs while the function is at its deepest stack depth. Some interrupts can
interrupt other interrupts, therefore to accurately model worst-case stack depth
we need to build a model of how interrupts may execute in x86-64 and aarch64,
and treat them as additional entry points which are called by every leaf
function.
Motivation for analyzing stack usage in the vDSO:
In Zircon, syscalls are exposed through the vDSO (virtual Dynamic Shared
Object). The vDSO is an interface which is like a shared library object, except
it is provided by the OS instead of existing as a literal file. If a process has
permission to make syscalls then the vDSO is mapped into its memory space, and
it can dynamically link against syscalls the same way it would any other shared
library object. The vDSO requires a certain amount of stack space to safely
complete any syscall, and that amount is part of the system’s ABI contract with
user code. Currently, however, that amount is unknown, undocumented and
unenforced; this tool will allow us to analyze the amount of stack space
currently implemented syscalls use, document the amount that will be
contractually required by the ABI, and enforce that future syscalls do not
exceed that amount.
Please let us know if you have any comments or suggestions about the
implementation, and if you have a project that could benefit from such a tool.
Thanks!
Annie Cherkaev
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.llvm.org/pipermail/llvm-dev/attachments/20180711/a4251440/attachment.html>
Andrew Kelley via llvm-dev
2018-Jul-11 20:36 UTC
[llvm-dev] static stack depth analysis tool
Hi Annie, The Zig frontend is highly interested in this tool. One of the big outstanding issues left to solve [1] is statically determining stack upper bound, as you have described. Currently, recursion is allowed the same as it is in C; however, the plan is: * Detect cycles in the call graph, and emit compile errors at the cycle entry point. * Users can break the cycle by using @newStackCall [2] to call a function using a heap-allocated buffer. This works today; however we need to be able to determine how much to allocate on the heap using the tools you describe. * Inline assembly, interrupts, function pointers, and external functions must be annotated as you have described so that the static analysis can complete the stack depth computation. * The implementation of spawnThread will determine the worst case stack upper bound for the entry point of the thread to know how much memory to allocate for the thread's stack. Let me know if I can help. I will watch this LLVM issue with great interest. [1]: https://github.com/ziglang/zig/issues/157 [2]: https://ziglang.org/documentation/master/#newStackCall On Wed, Jul 11, 2018 at 12:32 PM, Annie Cherkaev via llvm-dev < llvm-dev at lists.llvm.org> wrote:> Hello llvm-dev! > > We are currently building a tool using LLVM which statically computes the > worst-case stack depth for programs whose call-graphs are statically > constrained. While this task is undecidable for general programs, we > specifically plan to use it to analyze all entry points into Zircon’s > kernel and the vDSO. > > Currently, without such a tool, the best option for allocating kernel > memory in Zircon is taking a best guess of a conservative overestimate of > the memory required. This is problematic, however, because allocating too > much memory wastes valuable, highly limited RAM, and allocating too little > memory can result in stack overflows, which lead to catastrophic system > failure. This tool will eliminate the guesswork by reporting the smallest > amount of memory that is sufficient for all possible executions within the > kernel. > > We would appreciate feedback on our approach, and would like to hear if > anyone else has use-cases for such a tool. Below are some implementation > details, followed by some Zircon-specific details. > > Implementation details: > > This tool will perform the stack depth analysis by extracting the call > graph and the stack frame sizes from LLVM in two late passes, scheduled > just before codegen. A modulePass will write a dictionary of function names > to the list of called functions, and a machineFunctionPass will write a > dictionary of function names to their stack sizes. A script can then use > these dictionaries to annotate the call graph with the stack sizes by > matching up function names, and use this annotated call graph to find the > execution path with the largest stack. > > Backends: We plan to support the x86-64 and aarch64 architectures; adding > other architectures should be straight-forward. > > Fancy stacks: We plan to support using SafeStack & ShadowCallStack. > > Hand-written assembly: The Zircon codebase contains a nontrivial amount of > hand-written assembly which uses stack space. We will manually audit the > stack usage of assembly code, and provide it to the analysis in a lookup > table. > > Indirect Function Calls & Recursion: We hope to not run into too many call > graph complications in our codebase, refactor those which we do run into, > and add this tool into the build system to enforce that future code is > amenable to this analysis. We currently don’t plan on implementing any > additional analysis which LLVM does not already have. > > Testing: We’ll validate the correctness of the tool through unit testing, > end-to-end testing and ideally also fuzz testing. We can set up fuzz > testing by instrumenting the source code to dynamically monitor the stack > size-- for instance by inlining assembly to report the stack pointer-- and > comparing that result to the value the tool computes statically. While this > wouldn’t validate that the tool is reporting stack sizes precisely, it > would give us a way to automatically check that the true stack frame size > reported by the dynamic check (which is the stack size for *some* execution > path) is no larger than the worst-case stack size reported by the static > tool. > > Zircon-specific details: > > Interrupts: > > An executing thread can be temporarily halted by an interrupt, which will > execute code on the stack of the thread it paused. This means to ensure we > find what the true worst-case stack is, we need to model the case where an > interrupt occurs while the function is at its deepest stack depth. Some > interrupts can interrupt other interrupts, therefore to accurately model > worst-case stack depth we need to build a model of how interrupts may > execute in x86-64 and aarch64, and treat them as additional entry points > which are called by every leaf function. > > Motivation for analyzing stack usage in the vDSO: > > In Zircon, syscalls are exposed through the vDSO (virtual Dynamic Shared > Object). The vDSO is an interface which is like a shared library object, > except it is provided by the OS instead of existing as a literal file. If a > process has permission to make syscalls then the vDSO is mapped into its > memory space, and it can dynamically link against syscalls the same way it > would any other shared library object. The vDSO requires a certain amount > of stack space to safely complete any syscall, and that amount is part of > the system’s ABI contract with user code. Currently, however, that amount > is unknown, undocumented and unenforced; this tool will allow us to analyze > the amount of stack space currently implemented syscalls use, document the > amount that will be contractually required by the ABI, and enforce that > future syscalls do not exceed that amount. > > Please let us know if you have any comments or suggestions about the > implementation, and if you have a project that could benefit from such a > tool. > > Thanks! > > Annie Cherkaev > > > _______________________________________________ > LLVM Developers mailing list > llvm-dev at lists.llvm.org > http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev > >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20180711/28b9c0f2/attachment.html>
Note that LLVM can already emit per-function stack-size information in the
assembler/object file. Offhand I don't remember where it happens but should
not be hard to track down. You should certainly leverage that, however.
--paulr
From: llvm-dev [mailto:llvm-dev-bounces at lists.llvm.org] On Behalf Of Andrew
Kelley via llvm-dev
Sent: Wednesday, July 11, 2018 4:37 PM
To: Annie Cherkaev
Cc: LLVM Dev
Subject: Re: [llvm-dev] static stack depth analysis tool
Hi Annie,
The Zig frontend is highly interested in this tool.
One of the big outstanding issues left to solve [1] is statically determining
stack upper bound, as you have described.
Currently, recursion is allowed the same as it is in C; however, the plan is:
* Detect cycles in the call graph, and emit compile errors at the cycle entry
point.
* Users can break the cycle by using @newStackCall [2] to call a function using
a heap-allocated buffer. This works today; however we need to be able to
determine how much to allocate on the heap using the tools you describe.
* Inline assembly, interrupts, function pointers, and external functions must
be annotated as you have described so that the static analysis can complete the
stack depth computation.
* The implementation of spawnThread will determine the worst case stack upper
bound for the entry point of the thread to know how much memory to allocate for
the thread's stack.
Let me know if I can help. I will watch this LLVM issue with great interest.
[1]: https://github.com/ziglang/zig/issues/157
[2]: https://ziglang.org/documentation/master/#newStackCall
On Wed, Jul 11, 2018 at 12:32 PM, Annie Cherkaev via llvm-dev <llvm-dev at
lists.llvm.org<mailto:llvm-dev at lists.llvm.org>> wrote:
Hello llvm-dev!
We are currently building a tool using LLVM which statically computes the
worst-case stack depth for programs whose call-graphs are statically
constrained. While this task is undecidable for general programs, we
specifically plan to use it to analyze all entry points into Zircon’s kernel and
the vDSO.
Currently, without such a tool, the best option for allocating kernel memory in
Zircon is taking a best guess of a conservative overestimate of the memory
required. This is problematic, however, because allocating too much memory
wastes valuable, highly limited RAM, and allocating too little memory can result
in stack overflows, which lead to catastrophic system failure. This tool will
eliminate the guesswork by reporting the smallest amount of memory that is
sufficient for all possible executions within the kernel.
We would appreciate feedback on our approach, and would like to hear if anyone
else has use-cases for such a tool. Below are some implementation details,
followed by some Zircon-specific details.
Implementation details:
This tool will perform the stack depth analysis by extracting the call graph and
the stack frame sizes from LLVM in two late passes, scheduled just before
codegen. A modulePass will write a dictionary of function names to the list of
called functions, and a machineFunctionPass will write a dictionary of function
names to their stack sizes. A script can then use these dictionaries to annotate
the call graph with the stack sizes by matching up function names, and use this
annotated call graph to find the execution path with the largest stack.
Backends: We plan to support the x86-64 and aarch64 architectures; adding other
architectures should be straight-forward.
Fancy stacks: We plan to support using SafeStack & ShadowCallStack.
Hand-written assembly: The Zircon codebase contains a nontrivial amount of
hand-written assembly which uses stack space. We will manually audit the stack
usage of assembly code, and provide it to the analysis in a lookup table.
Indirect Function Calls & Recursion: We hope to not run into too many call
graph complications in our codebase, refactor those which we do run into, and
add this tool into the build system to enforce that future code is amenable to
this analysis. We currently don’t plan on implementing any additional analysis
which LLVM does not already have.
Testing: We’ll validate the correctness of the tool through unit testing,
end-to-end testing and ideally also fuzz testing. We can set up fuzz testing by
instrumenting the source code to dynamically monitor the stack size-- for
instance by inlining assembly to report the stack pointer-- and comparing that
result to the value the tool computes statically. While this wouldn’t validate
that the tool is reporting stack sizes precisely, it would give us a way to
automatically check that the true stack frame size reported by the dynamic check
(which is the stack size for *some* execution path) is no larger than the
worst-case stack size reported by the static tool.
Zircon-specific details:
Interrupts:
An executing thread can be temporarily halted by an interrupt, which will
execute code on the stack of the thread it paused. This means to ensure we find
what the true worst-case stack is, we need to model the case where an interrupt
occurs while the function is at its deepest stack depth. Some interrupts can
interrupt other interrupts, therefore to accurately model worst-case stack depth
we need to build a model of how interrupts may execute in x86-64 and aarch64,
and treat them as additional entry points which are called by every leaf
function.
Motivation for analyzing stack usage in the vDSO:
In Zircon, syscalls are exposed through the vDSO (virtual Dynamic Shared
Object). The vDSO is an interface which is like a shared library object, except
it is provided by the OS instead of existing as a literal file. If a process has
permission to make syscalls then the vDSO is mapped into its memory space, and
it can dynamically link against syscalls the same way it would any other shared
library object. The vDSO requires a certain amount of stack space to safely
complete any syscall, and that amount is part of the system’s ABI contract with
user code. Currently, however, that amount is unknown, undocumented and
unenforced; this tool will allow us to analyze the amount of stack space
currently implemented syscalls use, document the amount that will be
contractually required by the ABI, and enforce that future syscalls do not
exceed that amount.
Please let us know if you have any comments or suggestions about the
implementation, and if you have a project that could benefit from such a tool.
Thanks!
Annie Cherkaev
_______________________________________________
LLVM Developers mailing list
llvm-dev at lists.llvm.org<mailto:llvm-dev at lists.llvm.org>
http://lists.llvm.org/cgi-bin/mailman/listinfo/llvm-dev
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.llvm.org/pipermail/llvm-dev/attachments/20180712/21d90ec2/attachment-0001.html>