On 2019/10/21 ??6:00, Zhu, Lingshan wrote:>
> On 10/16/2019 4:40 PM, Jason Wang wrote:
>>
>> On 2019/10/16 ??9:30, Zhu Lingshan wrote:
>>> This commit introduced ifcvf_base layer, which handles IFC VF NIC
>>> hardware operations and configurations.
>>
>>
>> It's better to describe the difference between ifc vf and virtio in
>> the commit log or is there a open doc for this?
>>
>>
> Hi Jason,
>
> Sure, I will split these code into small patches with detailed commit
> logs in v1 patchset.
>>>
>>> Signed-off-by: Zhu Lingshan <lingshan.zhu at intel.com>
>>> ---
>>> ? drivers/vhost/ifcvf/ifcvf_base.c | 390
>>> +++++++++++++++++++++++++++++++++++++++
>>> ? drivers/vhost/ifcvf/ifcvf_base.h | 137 ++++++++++++++
>>> ? 2 files changed, 527 insertions(+)
>>> ? create mode 100644 drivers/vhost/ifcvf/ifcvf_base.c
>>> ? create mode 100644 drivers/vhost/ifcvf/ifcvf_base.h
>>>
>>> diff --git a/drivers/vhost/ifcvf/ifcvf_base.c
>>> b/drivers/vhost/ifcvf/ifcvf_base.c
>>> new file mode 100644
>>> index 000000000000..b85e14c9bdcf
>>> --- /dev/null
>>> +++ b/drivers/vhost/ifcvf/ifcvf_base.c
>>> @@ -0,0 +1,390 @@
>>> +// SPDX-License-Identifier: GPL-2.0-only
>>> +/*
>>> + * Copyright (C) 2019 Intel Corporation.
>>> + */
>>> +
>>> +#include "ifcvf_base.h"
>>> +
>>> +static void *get_cap_addr(struct ifcvf_hw *hw, struct
>>> virtio_pci_cap *cap)
>>> +{
>>> +??? u8 bar = cap->bar;
>>> +??? u32 length = cap->length;
>>> +??? u32 offset = cap->offset;
>>> +??? struct ifcvf_adapter *ifcvf >>> +???????
container_of(hw, struct ifcvf_adapter, vf);
>>> +
>>> +??? if (bar >= IFCVF_PCI_MAX_RESOURCE) {
>>> +??????? IFC_ERR(ifcvf->dev,
>>> +??????????? "Invalid bar number %u to get
capabilities.\n", bar);
>>> +??????? return NULL;
>>> +??? }
>>> +
>>> +??? if (offset + length < offset) {
>>> +??????? IFC_ERR(ifcvf->dev, "offset(%u) + length(%u)
overflows\n",
>>> +??????????? offset, length);
>>> +??????? return NULL;
>>> +??? }
>>> +
>>> +??? if (offset + length > hw->mem_resource[cap->bar].len)
{
>>> +??????? IFC_ERR(ifcvf->dev,
>>> +??????????? "offset(%u) + len(%u) overflows bar%u to get
>>> capabilities.\n",
>>> +??????????? offset, length, bar);
>>> +??????? return NULL;
>>> +??? }
>>> +
>>> +??? return hw->mem_resource[bar].addr + offset;
>>> +}
>>> +
>>> +int ifcvf_read_config_range(struct pci_dev *dev,
>>> +??????????? uint32_t *val, int size, int where)
>>> +{
>>> +??? int i;
>>> +
>>> +??? for (i = 0; i < size; i += 4) {
>>> +??????? if (pci_read_config_dword(dev, where + i, val + i / 4)
< 0)
>>> +??????????? return -1;
>>> +??? }
>>> +??? return 0;
>>> +}
>>> +
>>> +int ifcvf_init_hw(struct ifcvf_hw *hw, struct pci_dev *dev)
>>> +{
>>> +??? int ret;
>>> +??? u8 pos;
>>> +??? struct virtio_pci_cap cap;
>>> +??? u32 i;
>>> +??? u16 notify_off;
>>> +
>>> +??? ret = pci_read_config_byte(dev, PCI_CAPABILITY_LIST,
&pos);
>>> +
>>> +??? if (ret < 0) {
>>> +??????? IFC_ERR(&dev->dev, "failed to read PCI
capability list.\n");
>>> +??????? return -EIO;
>>> +??? }
>>> +
>>> +??? while (pos) {
>>> +??????? ret = ifcvf_read_config_range(dev, (u32 *)&cap,
>>> +??????????????? sizeof(cap), pos);
>>> +
>>> +??????? if (ret < 0) {
>>> +??????????? IFC_ERR(&dev->dev, "failed to get PCI
capability at %x",
>>> +??????????????????? pos);
>>> +??????????? break;
>>> +??????? }
>>> +
>>> +??????? if (cap.cap_vndr != PCI_CAP_ID_VNDR)
>>> +??????????? goto next;
>>> +
>>> +??????? IFC_INFO(&dev->dev, "read PCI config:\n"
>>> +??????????????????? "config type: %u.\n"
>>> +??????????????????? "PCI bar: %u.\n"
>>> +??????????????????? "PCI bar offset: %u.\n"
>>> +??????????????????? "PCI config len: %u.\n",
>>> +??????????????????? cap.cfg_type, cap.bar,
>>> +??????????????????? cap.offset, cap.length);
>>> +
>>> +??????? switch (cap.cfg_type) {
>>> +??????? case VIRTIO_PCI_CAP_COMMON_CFG:
>>> +??????????? hw->common_cfg = get_cap_addr(hw, &cap);
>>> +??????????? IFC_INFO(&dev->dev, "hw->common_cfg =
%p.\n",
>>> +??????????????????? hw->common_cfg);
>>> +??????????? break;
>>> +??????? case VIRTIO_PCI_CAP_NOTIFY_CFG:
>>> +??????????? pci_read_config_dword(dev, pos + sizeof(cap),
>>> +??????????????? &hw->notify_off_multiplier);
>>> +??????????? hw->notify_bar = cap.bar;
>>> +??????????? hw->notify_base = get_cap_addr(hw, &cap);
>>> +??????????? IFC_INFO(&dev->dev, "hw->notify_base =
%p.\n",
>>> +??????????????????? hw->notify_base);
>>> +??????????? break;
>>> +??????? case VIRTIO_PCI_CAP_ISR_CFG:
>>> +??????????? hw->isr = get_cap_addr(hw, &cap);
>>> +??????????? IFC_INFO(&dev->dev, "hw->isr =
%p.\n", hw->isr);
>>> +??????????? break;
>>> +??????? case VIRTIO_PCI_CAP_DEVICE_CFG:
>>> +??????????? hw->dev_cfg = get_cap_addr(hw, &cap);
>>> +??????????? IFC_INFO(&dev->dev, "hw->dev_cfg =
%p.\n", hw->dev_cfg);
>>> +??????????? break;
>>> +??????? }
>>> +next:
>>> +??????? pos = cap.cap_next;
>>> +??? }
>>> +
>>> +??? if (hw->common_cfg == NULL || hw->notify_base == NULL ||
>>> +??????? hw->isr == NULL || hw->dev_cfg == NULL) {
>>> +??????? IFC_ERR(&dev->dev, "Incomplete PCI
capabilities.\n");
>>> +??????? return -1;
>>> +??? }
>>> +
>>> +??? for (i = 0; i < (IFCVF_MAX_QUEUE_PAIRS * 2); i++) {
>>
>>
>> Any reason for using hard coded queue pairs limit other than the
>> max_queue_pairs in the net config?
> Hi Jason, Thanks for your kindly comments. For now the driver don't
> support MQ, we intend to provide a minimal feature sets in this
> version 1 driver.
Ok, it's better to add comment above IFCVF_MAX_QUEUE_PAIRS.
>>
>>
>>> +??????? iowrite16(i, &hw->common_cfg->queue_select);
>>> +??????? notify_off =
ioread16(&hw->common_cfg->queue_notify_off);
>>> +??????? hw->notify_addr[i] = (void *)((u8 *)hw->notify_base
+
>>> +??????????????? notify_off * hw->notify_off_multiplier);
>>> +??? }
>>> +
>>> +??? hw->lm_cfg = hw->mem_resource[4].addr;
>>> +
>>> +??? IFC_INFO(&dev->dev, "PCI capability
mapping:\n"
>>> +??????????????? "common cfg: %p\n"
>>> +??????????????? "notify base: %p\n"
>>> +??????????????? "isr cfg: %p\n"
>>> +??????????????? "device cfg: %p\n"
>>> +??????????????? "multiplier: %u\n",
>>> +??????????????? hw->common_cfg,
>>> +??????????????? hw->notify_base,
>>> +??????????????? hw->isr,
>>> +??????????????? hw->dev_cfg,
>>> +??????????????? hw->notify_off_multiplier);
>>> +
>>> +??? return 0;
>>> +}
>>> +
>>> +static u8 ifcvf_get_status(struct ifcvf_hw *hw)
>>> +{
>>> +??? return ioread8(&hw->common_cfg->device_status);
>>> +}
>>> +
>>> +static void ifcvf_set_status(struct ifcvf_hw *hw, u8 status)
>>> +{
>>> +??? iowrite8(status, &hw->common_cfg->device_status);
>>> +}
>>> +
>>> +static void ifcvf_reset(struct ifcvf_hw *hw)
>>> +{
>>> +??? ifcvf_set_status(hw, 0);
>>> +
>>> +??? /* flush status write */
>>> +??? ifcvf_get_status(hw);
>>
>>
>> Why this flush is needed?
>
> accoring to PCIE requirements, this get_status() after a set_status()
> is used to block the call chain, make sure the hardware has finished
> the write operation.
>
> It is a bad comment anyway, I will remove it.
Interesting, does this mean if we need also fix the vp_set_status for
kernel virtio_pci driver?
>
>>
>>
>>> +??? hw->generation++;
>>> +}
>>> +
>>> +static void ifcvf_add_status(struct ifcvf_hw *hw, u8 status)
>>> +{
>>> +??? if (status != 0)
>>> +??????? status |= ifcvf_get_status(hw);
>>> +
>>> +??? ifcvf_set_status(hw, status);
>>> +??? ifcvf_get_status(hw);
>>> +}
>>> +
>>> +u64 ifcvf_get_features(struct ifcvf_hw *hw)
>>> +{
>>> +??? u32 features_lo, features_hi;
>>> +??? struct virtio_pci_common_cfg *cfg = hw->common_cfg;
>>> +
>>> +??? iowrite32(0, &cfg->device_feature_select);
>>> +??? features_lo = ioread32(&cfg->device_feature);
>>> +
>>> +??? iowrite32(1, &cfg->device_feature_select);
>>> +??? features_hi = ioread32(&cfg->device_feature);
>>> +
>>> +??? return ((u64)features_hi << 32) | features_lo;
>>> +}
>>> +static int ifcvf_with_feature(struct ifcvf_hw *hw, u64 bit)
>>> +{
>>> +??? return (hw->req_features & (1ULL << bit)) != 0;
>>> +}
>>> +
>>> +static void ifcvf_read_dev_config(struct ifcvf_hw *hw, u64 offset,
>>> +?????????????? void *dst, int length)
>>> +{
>>> +??? int i;
>>> +??? u8 *p;
>>> +??? u8 old_gen, new_gen;
>>> +
>>> +??? do {
>>> +??????? old_gen =
ioread8(&hw->common_cfg->config_generation);
>>> +
>>> +??????? p = dst;
>>> +??????? for (i = 0; i < length; i++)
>>> +??????????? *p++ = ioread8((u8 *)hw->dev_cfg + offset + i);
>>> +
>>> +??????? new_gen =
ioread8(&hw->common_cfg->config_generation);
>>> +??? } while (old_gen != new_gen);
>>> +}
>>> +
>>> +void ifcvf_get_linkstatus(struct ifcvf_hw *hw, u8 *is_linkup)
>>> +{
>>
>>
>> Why not just return bollean?
> sure, can do.
>>
>>
>>> +??? u16 status;
>>> +??? u64 host_features;
>>> +
>>> +??? host_features = ifcvf_get_features(hw);
>>> +??? if (ifcvf_with_feature(hw, VIRTIO_NET_F_STATUS)) {
>>> +??????? ifcvf_read_dev_config(hw,
>>> +??????????????? offsetof(struct ifcvf_net_config, status),
>>> +??????????????? &status, sizeof(status));
>>> +??????? if ((status & VIRTIO_NET_S_LINK_UP) == 0)
>>> +??????????? (*is_linkup) = 1;
>>> +??????? else
>>> +??????????? (*is_linkup) = 0;
>>> +??? } else
>>> +??????? (*is_linkup) = 0;
>>> +}
>>> +
>>> +static void ifcvf_set_features(struct ifcvf_hw *hw, u64 features)
>>> +{
>>> +??? struct virtio_pci_common_cfg *cfg = hw->common_cfg;
>>> +
>>> +??? iowrite32(0, &cfg->guest_feature_select);
>>> +??? iowrite32(features & ((1ULL << 32) - 1),
&cfg->guest_feature);
>>> +
>>> +??? iowrite32(1, &cfg->guest_feature_select);
>>> +??? iowrite32(features >> 32, &cfg->guest_feature);
>>> +}
>>> +
>>> +static int ifcvf_config_features(struct ifcvf_hw *hw)
>>> +{
>>> +??? u64 host_features;
>>> +??? struct ifcvf_adapter *ifcvf >>> +???????
container_of(hw, struct ifcvf_adapter, vf);
>>> +
>>> +??? host_features = ifcvf_get_features(hw);
>>> +??? hw->req_features &= host_features;
>>
>>
>> Is this a must, can't device deal with this?
> I will usehw->req_features directly, thanks for point it out.
>>
>>
>>> +
>>> +??? ifcvf_set_features(hw, hw->req_features);
>>> +??? ifcvf_add_status(hw, VIRTIO_CONFIG_S_FEATURES_OK);
>>> +
>>> +??? if (!(ifcvf_get_status(hw) & VIRTIO_CONFIG_S_FEATURES_OK))
{
>>> +??????? IFC_ERR(ifcvf->dev, "Failed to set FEATURES_OK
status\n");
>>> +??????? return -EIO;
>>> +??? }
>>> +
>>> +??? return 0;
>>> +}
>>> +
>>> +static void io_write64_twopart(u64 val, u32 *lo, u32 *hi)
>>> +{
>>> +??? iowrite32(val & ((1ULL << 32) - 1), lo);
>>> +??? iowrite32(val >> 32, hi);
>>> +}
>>> +
>>> +static int ifcvf_hw_enable(struct ifcvf_hw *hw)
>>> +{
>>> +??? struct virtio_pci_common_cfg *cfg;
>>> +??? u8 *lm_cfg;
>>> +??? u32 i;
>>> +??? struct ifcvf_adapter *ifcvf >>> +???????
container_of(hw, struct ifcvf_adapter, vf);
>>> +
>>> +??? cfg = hw->common_cfg;
>>> +??? lm_cfg = hw->lm_cfg;
>>> +
>>> +??? iowrite16(IFCVF_MSI_CONFIG_OFF, &cfg->msix_config);
>>> +??? if (ioread16(&cfg->msix_config) ==
VIRTIO_MSI_NO_VECTOR) {
>>> +??????? IFC_ERR(ifcvf->dev, "No msix vector for device
config.\n");
>>> +??????? return -1;
>>> +??? }
>>> +
>>> +??? for (i = 0; i < hw->nr_vring; i++) {
>>> +??????? iowrite16(i, &cfg->queue_select);
>>> +??????? io_write64_twopart(hw->vring[i].desc,
&cfg->queue_desc_lo,
>>> +??????????????? &cfg->queue_desc_hi);
>>> +??????? io_write64_twopart(hw->vring[i].avail,
&cfg->queue_avail_lo,
>>> +??????????????? &cfg->queue_avail_hi);
>>> +??????? io_write64_twopart(hw->vring[i].used,
&cfg->queue_used_lo,
>>> +??????????????? &cfg->queue_used_hi);
>>> +??????? iowrite16(hw->vring[i].size, &cfg->queue_size);
>>> +
>>> +??????? *(u32 *)(lm_cfg + IFCVF_LM_RING_STATE_OFFSET +
>>> +??????????????? (i / 2) * IFCVF_LM_CFG_SIZE + (i % 2) * 4)
>>> +??????????? (u32)hw->vring[i].last_avail_idx |
>>> +??????????? ((u32)hw->vring[i].last_used_idx << 16);
>>> +
>>> +??????? iowrite16(i + IFCVF_MSI_QUEUE_OFF,
&cfg->queue_msix_vector);
>>> +??????? if (ioread16(&cfg->queue_msix_vector) =>>>
+??????????????? VIRTIO_MSI_NO_VECTOR) {
>>> +??????????? IFC_ERR(ifcvf->dev,
>>> +??????????????? "No msix vector for queue %u.\n", i);
>>> +??????????? return -1;
>>> +??????? }
>>> +
>>> +??????? iowrite16(1, &cfg->queue_enable);
>>> +??? }
>>> +
>>> +??? return 0;
>>> +}
>>> +
>>> +static void ifcvf_hw_disable(struct ifcvf_hw *hw)
>>> +{
>>> +??? u32 i;
>>> +??? struct virtio_pci_common_cfg *cfg;
>>> +
>>> +??? cfg = hw->common_cfg;
>>> +
>>> +??? iowrite16(VIRTIO_MSI_NO_VECTOR, &cfg->msix_config);
>>> +??? for (i = 0; i < hw->nr_vring; i++) {
>>> +??????? iowrite16(i, &cfg->queue_select);
>>> +??????? iowrite16(0, &cfg->queue_enable);
>>> +??????? iowrite16(VIRTIO_MSI_NO_VECTOR,
&cfg->queue_msix_vector);
>>> +??? }
>>> +}
>>> +
>>> +int ifcvf_start_hw(struct ifcvf_hw *hw)
>>> +{
>>> +??? ifcvf_reset(hw);
>>> +??? ifcvf_add_status(hw, VIRTIO_CONFIG_S_ACKNOWLEDGE);
>>> +??? ifcvf_add_status(hw, VIRTIO_CONFIG_S_DRIVER);
>>> +
>>> +??? if (ifcvf_config_features(hw) < 0)
>>> +??????? return -1;
>>> +
>>> +??? if (ifcvf_hw_enable(hw) < 0)
>>> +??????? return -1;
>>> +
>>> +??? ifcvf_add_status(hw, VIRTIO_CONFIG_S_DRIVER_OK);
>>> +
>>> +??? return 0;
>>> +}
>>> +
>>> +void ifcvf_stop_hw(struct ifcvf_hw *hw)
>>> +{
>>> +??? ifcvf_hw_disable(hw);
>>> +??? ifcvf_reset(hw);
>>> +}
>>> +
>>> +void ifcvf_enable_logging_vf(struct ifcvf_hw *hw, u64 log_base,
u64
>>> log_size)
>>> +{
>>> +??? u8 *lm_cfg;
>>> +
>>> +??? lm_cfg = hw->lm_cfg;
>>> +
>>> +??? *(u32 *)(lm_cfg + IFCVF_LM_BASE_ADDR_LOW) >>>
+??????? log_base & IFCVF_32_BIT_MASK;
>>> +
>>> +??? *(u32 *)(lm_cfg + IFCVF_LM_BASE_ADDR_HIGH) >>>
+??????? (log_base >> 32) & IFCVF_32_BIT_MASK;
>>> +
>>> +??? *(u32 *)(lm_cfg + IFCVF_LM_END_ADDR_LOW) >>> +???????
(log_base + log_size) & IFCVF_32_BIT_MASK;
>>> +
>>> +??? *(u32 *)(lm_cfg + IFCVF_LM_END_ADDR_HIGH) >>>
+??????? ((log_base + log_size) >> 32) & IFCVF_32_BIT_MASK;
>>> +
>>> +??? *(u32 *)(lm_cfg + IFCVF_LM_LOGGING_CTRL) = IFCVF_LM_ENABLE_VF;
>>> +}
>>
>>
>> Is the device using iova or gpa for the logging?
> gpa, I will remove all LM related functions since we plan to support
> LM in next version driver.
Ok, that's why vIOMMU is not fully supported in the case. So we need
1) Filter out _F_IOMMU_PLATFORM for vhost-mdev
2) Can keep it for virtio-mdev
But one more question is: how device know which kinds of address it is
used? Or I guess the device doesn't know the only problem is IOVA->GPA
conversion in the case of vIOMMU. If this is true, maybe we can
introduce API to sync dirty pages and do the conversion there instead of
using share memory as the log as what current vhost did.
>>
>>
>>> +
>>> +void ifcvf_disable_logging(struct ifcvf_hw *hw)
>>> +{
>>> +??? u8 *lm_cfg;
>>> +
>>> +??? lm_cfg = hw->lm_cfg;
>>> +??? *(u32 *)(lm_cfg + IFCVF_LM_LOGGING_CTRL) = IFCVF_LM_DISABLE;
>>> +}
>>> +
>>> +void ifcvf_notify_queue(struct ifcvf_hw *hw, u16 qid)
>>> +{
>>> +
>>> +??? iowrite16(qid, hw->notify_addr[qid]);
>>> +}
>>> +
>>> +u8 ifcvf_get_notify_region(struct ifcvf_hw *hw)
>>> +{
>>> +??? return hw->notify_bar;
>>> +}
>>> +
>>> +u64 ifcvf_get_queue_notify_off(struct ifcvf_hw *hw, int qid)
>>> +{
>>> +??? return (u8 *)hw->notify_addr[qid] -
>>> +??????? (u8 *)hw->mem_resource[hw->notify_bar].addr;
>>> +}
>>> diff --git a/drivers/vhost/ifcvf/ifcvf_base.h
>>> b/drivers/vhost/ifcvf/ifcvf_base.h
>>> new file mode 100644
>>> index 000000000000..1ab1a1c40f24
>>> --- /dev/null
>>> +++ b/drivers/vhost/ifcvf/ifcvf_base.h
>>> @@ -0,0 +1,137 @@
>>> +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
>>> +/*
>>> + * Copyright (C) 2019 Intel Corporation.
>>> + */
>>> +
>>> +#ifndef _IFCVF_H_
>>> +#define _IFCVF_H_
>>> +
>>> +#include <linux/virtio_mdev.h>
>>> +#include <linux/pci.h>
>>> +#include <linux/pci_regs.h>
>>> +#include <uapi/linux/virtio_net.h>
>>> +#include <uapi/linux/virtio_config.h>
>>> +#include <uapi/linux/virtio_pci.h>
>>> +
>>> +#define IFCVF_VENDOR_ID???????? 0x1AF4
>>> +#define IFCVF_DEVICE_ID???????? 0x1041
>>> +#define IFCVF_SUBSYS_VENDOR_ID? 0x8086
>>> +#define IFCVF_SUBSYS_DEVICE_ID? 0x001A
>>> +
>>> +/*
>>> + * Some ifcvf feature bits (currently bits 28 through 31) are
>>> + * reserved for the transport being used (eg. ifcvf_ring), the
>>> + * rest are per-device feature bits.
>>> + */
>>> +#define IFCVF_TRANSPORT_F_START 28
>>> +#define IFCVF_TRANSPORT_F_END?? 34
>>> +
>>> +#define IFC_SUPPORTED_FEATURES \
>>> +??????? ((1ULL << VIRTIO_NET_F_MAC)??????????? | \
>>> +???????? (1ULL << VIRTIO_F_ANY_LAYOUT)??????????? | \
>>> +???????? (1ULL << VIRTIO_F_VERSION_1) | \
>>> +???????? (1ULL << VHOST_F_LOG_ALL)??????????? | \
>>> +???????? (1ULL << VIRTIO_NET_F_GUEST_ANNOUNCE)??????? | \
>>> +???????? (1ULL << VIRTIO_NET_F_CTRL_VQ)??????????? | \
>>> +???????? (1ULL << VIRTIO_NET_F_STATUS)??????????? | \
>>> +???????? (1ULL << VIRTIO_NET_F_MRG_RXBUF)) /* not fully
supported */
>>> +
>>> +#define IFCVF_MAX_QUEUE_PAIRS??????? 1
>>> +#define IFCVF_MAX_QUEUES??????? 2
>>> +
>>> +#define IFCVF_QUEUE_ALIGNMENT??????? PAGE_SIZE
>>> +
>>> +#define IFCVF_MSI_CONFIG_OFF??? 0
>>> +#define IFCVF_MSI_QUEUE_OFF??? 1
>>> +#define IFCVF_PCI_MAX_RESOURCE??? 6
>>> +
>>> +/* 46 bit CPU physical address, avoid overlap */
>>> +#define LM_IOVA 0x400000000000
>>> +
>>> +#define IFCVF_LM_CFG_SIZE??????? 0x40
>>> +#define IFCVF_LM_RING_STATE_OFFSET??? 0x20
>>> +
>>> +#define IFCVF_LM_LOGGING_CTRL??????? 0x0
>>> +
>>> +#define IFCVF_LM_BASE_ADDR_LOW??????? 0x10
>>> +#define IFCVF_LM_BASE_ADDR_HIGH??????? 0x14
>>> +#define IFCVF_LM_END_ADDR_LOW??????? 0x18
>>> +#define IFCVF_LM_END_ADDR_HIGH??????? 0x1c
>>> +
>>> +#define IFCVF_LM_DISABLE??????? 0x0
>>> +#define IFCVF_LM_ENABLE_VF??????? 0x1
>>> +#define IFCVF_LM_ENABLE_PF??????? 0x3
>>> +
>>> +#define IFCVF_32_BIT_MASK??????? 0xffffffff
>>> +
>>> +#define IFC_ERR(dev, fmt, ...)??? dev_err(dev, fmt, ##__VA_ARGS__)
>>> +#define IFC_INFO(dev, fmt, ...)??? dev_info(dev, fmt,
##__VA_ARGS__)
>>> +
>>> +struct ifcvf_net_config {
>>> +??? u8??? mac[6];
>>> +??? u16?? status;
>>> +??? u16?? max_virtqueue_pairs;
>>> +} __packed;
>>> +
>>> +struct ifcvf_pci_mem_resource {
>>> +??? u64????? phys_addr; /**< Physical address, 0 if not
resource. */
>>> +??? u64????? len;?????? /**< Length of the resource. */
>>> +??? u8?????? *addr;???? /**< Virtual address, NULL when not
mapped. */
>>> +};
>>> +
>>> +struct vring_info {
>>> +??? u64 desc;
>>> +??? u64 avail;
>>> +??? u64 used;
>>> +??? u16 size;
>>> +??? u16 last_avail_idx;
>>> +??? u16 last_used_idx;
>>> +??? bool ready;
>>> +??? char msix_name[256];
>>> +??? struct virtio_mdev_callback cb;
>>> +};
>>> +
>>> +struct ifcvf_hw {
>>> +??? u8??? *isr;
>>> +??? u8??? notify_bar;
>>> +??? u8??? *lm_cfg;
>>> +??? u8??? status;
>>> +??? u8??? nr_vring;
>>
>>
>> Is the the number of queue currently used?
> Do you mean nr_vring? Yes it is used in hardware enable / disable
> functions.
>>
>>
>>> +??? u16??? *notify_base;
>>> +??? u16??? *notify_addr[IFCVF_MAX_QUEUE_PAIRS * 2];
>>> +??? u32??? generation;
>>> +??? u32??? notify_off_multiplier;
>>> +??? u64??? req_features;
>>> +??? struct??? virtio_pci_common_cfg *common_cfg;
>>> +??? struct??? ifcvf_net_config *dev_cfg;
>>> +??? struct??? vring_info vring[IFCVF_MAX_QUEUE_PAIRS * 2];
>>> +??? struct??? ifcvf_pci_mem_resource
>>> mem_resource[IFCVF_PCI_MAX_RESOURCE];
>>> +};
>>> +
>>> +#define IFC_PRIVATE_TO_VF(adapter) \
>>> +??? (&((struct ifcvf_adapter *)adapter)->vf)
>>> +
>>> +#define IFCVF_MAX_INTR (IFCVF_MAX_QUEUE_PAIRS * 2 + 1)
>>
>>
>> The extra one means the config interrupt?
> Yes.
Ok, when we support control vq, it should be changed to 2*N + 2.
Thanks
>>
>>
>>> +
>>> +struct ifcvf_adapter {
>>> +??? struct??? device *dev;
>>> +??? struct??? mutex mdev_lock;
>>
>>
>> Not used in the patch, move to next one?
> Sure, these not used ones will be moved to small patches where they
> are used in v1 patchset.
>>
>>
>>> +??? int??? mdev_count;
>>
>>
>> Not used.
>>
>>
>>> +??? struct??? list_head dma_maps;
>>
>>
>> This is not used.
>>
>> Thanks
>>
>>
>>> +??? int??? vectors;
>>> +??? struct??? ifcvf_hw vf;
>>> +};
>>> +
>>> +int ifcvf_init_hw(struct ifcvf_hw *hw, struct pci_dev *dev);
>>> +u64 ifcvf_get_features(struct ifcvf_hw *hw);
>>> +int ifcvf_start_hw(struct ifcvf_hw *hw);
>>> +void ifcvf_stop_hw(struct ifcvf_hw *hw);
>>> +void ifcvf_enable_logging(struct ifcvf_hw *hw, u64 log_base, u64
>>> log_size);
>>> +void ifcvf_enable_logging_vf(struct ifcvf_hw *hw, u64 log_base,
u64
>>> log_size);
>>> +void ifcvf_disable_logging(struct ifcvf_hw *hw);
>>> +void ifcvf_notify_queue(struct ifcvf_hw *hw, u16 qid);
>>> +void ifcvf_get_linkstatus(struct ifcvf_hw *hw, u8 *is_linkup);
>>> +u8 ifcvf_get_notify_region(struct ifcvf_hw *hw);
>>> +u64 ifcvf_get_queue_notify_off(struct ifcvf_hw *hw, int qid);
>>> +
>>> +#endif /* _IFCVF_H_ */
