Hello all,
First thanks to all for helping me. I have an issue to bring up bridging
isis packets using BRCTL.
As i am quite a newbie, maybe this is not possible or maybe I forget to
load modules so that the bridging I am trying to put in place work
properly.
Here is the configuration I used:
I1 ------ eth1 (physical interface of my linux machine)
----------- BRIDGE ----------- n1-eth0 (tuntap interface) ---- I2
Where I1 and I2 are two ISIS processes.
On both eth1 and n1-eth0, there are ISIS packets send by I1 and I2
processes.
With an analyzer (ethereal), I can see ISIS packets sent by ISIS process
(I1) on eth1 but no ISIS packet from I2 (and vice versa).
However, if I make a capture on the BRIDGE, I have ISIS packets from
both ISIS processes (I1 and I2).
Bridge configuration:
-bridge-utils-1.0.4
-linux kernel: 2.6
Anyone can help me ?
Thank you
Sovatha
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.linux-foundation.org/pipermail/bridge/attachments/20050311/d914de19/attachment-0002.htm
