thr3ads.net - libvirt users - Re: [libvirt-users] passthrough of PCI-device [Oct 2014]

If this information is useful, please help other people find it:
Share via:

Weis, Michael (DWIE)

2014-Oct-13 05:54 UTC

Re: [libvirt-users] passthrough of PCI-device

Good morning,

there is a typo in my description;
the line
     <address domain='0x0' bus='0x1' slot='0x00'
function='0x0'/>
should be
     <address domain='0x0' bus='0x2' slot='0x00'
function='0x0'/>
That was correct in my xml-file.

Isn't there anybody how can help me with that?


Regards

   Michael Weis



Von: Weis, Michael (DWIE)
Gesendet: Dienstag, 7. Oktober 2014 11:45
An: 'libvirt-users@redhat.com'
Betreff: passthrough of PCI-device

Hello,

I try to passthrough a PCI-card to a VM named  testvm
I want to do that with an xml-file named hga.xml including the following
content:

<hostdev mode='subsystem' type='pci'
managed='yes'>
  <source>
     <address domain='0x0' bus='0x1' slot='0x00'
function='0x0'/>
  </source>
</hostdev>

When I execute
virsh attach-device testvm hga.xml
I get the following error:
Fehler: Fehler beim Anhängen des Geräts von hga.xml
(error: error while attaching device from hga.xml)
Fehler: Interner Fehler: Kann Qemu-Befehl 'device_add' nicht ausführen:
Device initialization failed.
(error: internal error: cannot execute 'device_add':

In the syslog of the host I get the following errors:
Oct  7 11:32:34 artemis2 journal: Interner Fehler: Kann Qemu-Befehl
'device_add' nicht ausführen: Device initialization failed.
Oct  7 11:32:53 artemis2 kernel: ffff880220fadd10 ffffffff810f924a
ffff880220fadd28 0000000000000246
Oct  7 11:32:53 artemis2 kernel: ffff8800bd07a400 000000007265756d
ffffffffa0866ee0 0000000000000000
Oct  7 11:32:53 artemis2 kernel: Call Trace:
Oct  7 11:32:53 artemis2 kernel: [<ffffffff815e237b>] dump_stack+0x19/0x1b
Oct  7 11:32:53 artemis2 kernel: [<ffffffff810f924a>]
__setup_irq+0x54a/0x570
Oct  7 11:32:53 artemis2 kernel: [<ffffffffa0866ee0>] ?
virqfd_wakeup+0xc0/0xc0 [vfio_pci]
Oct  7 11:32:53 artemis2 kernel: [<ffffffff810f93cc>]
request_threaded_irq+0xcc/0x170
Oct  7 11:32:53 artemis2 kernel: [<ffffffffa0866b8a>]
vfio_intx_set_signal+0x10a/0x1f0 [vfio_pci]
Oct  7 11:32:53 artemis2 kernel: [<ffffffffa08670e8>]
vfio_pci_set_intx_trigger+0xc8/0x1b0 [vfio_pci]
Oct  7 11:32:53 artemis2 kernel: [<ffffffffa086799b>]
vfio_pci_set_irqs_ioctl+0x7b/0x100 [vfio_pci]
Oct  7 11:32:53 artemis2 kernel: [<ffffffff8115d352>] ?
memdup_user+0x42/0x70
Oct  7 11:32:53 artemis2 kernel: [<ffffffffa0865e74>]
vfio_pci_ioctl+0x314/0xa00 [vfio_pci]
Oct  7 11:32:53 artemis2 kernel: [<ffffffff81194b6a>] ?
kmem_cache_alloc+0x1ba/0x1d0
Oct  7 11:32:53 artemis2 kernel: [<ffffffff811b156c>] ?
get_empty_filp+0x5c/0x190
Oct  7 11:32:53 artemis2 kernel: [<ffffffff811f1891>] ?
fsnotify+0x251/0x350
Oct  7 11:32:53 artemis2 kernel: [<ffffffff81251806>] ?
security_file_alloc+0x16/0x20
Oct  7 11:32:53 artemis2 kernel: [<ffffffff811b15a0>] ?
get_empty_filp+0x90/0x190
Oct  7 11:32:53 artemis2 kernel: [<ffffffffa084f163>]
vfio_device_fops_unl_ioctl+0x23/0x30 [vfio]
Oct  7 11:32:53 artemis2 kernel: [<ffffffff811c2af5>]
do_vfs_ioctl+0x2e5/0x4c0
Oct  7 11:32:53 artemis2 kernel: [<ffffffff811af780>] ?
vfs_write+0x160/0x1e0
Oct  7 11:32:53 artemis2 kernel: [<ffffffff811c2d71>] SyS_ioctl+0xa1/0xc0
Oct  7 11:32:53 artemis2 kernel: [<ffffffff815f2a59>]
system_call_fastpath+0x16/0x1b
Oct  7 11:32:53 artemis2 journal: Interner Fehler: Kann Qemu-Befehl
'device_add' nicht ausführen: Device initialization failed.

My version-information:
OS: CentOS Linux release 7.0.1406 (Core)
Kernel: Linux artemis2 3.10.0-123.8.1.el7.x86_64
libvirt-daemon-driver-secret-1.2.8-1.el7.centos.x86_64
libvirt-1.2.8-1.el7.centos.x86_64
libvirt-daemon-kvm-1.2.8-1.el7.centos.x86_64
libvirt-client-1.2.8-1.el7.centos.x86_64
libvirt-daemon-driver-qemu-1.2.8-1.el7.centos.x86_64
libvirt-daemon-config-network-1.2.8-1.el7.centos.x86_64
libvirt-daemon-driver-interface-1.2.8-1.el7.centos.x86_64
libvirt-daemon-1.2.8-1.el7.centos.x86_64
libvirt-daemon-driver-nodedev-1.2.8-1.el7.centos.x86_64
libvirt-daemon-driver-storage-1.2.8-1.el7.centos.x86_64
libvirt-daemon-config-nwfilter-1.2.8-1.el7.centos.x86_64
libvirt-daemon-driver-network-1.2.8-1.el7.centos.x86_64
libvirt-daemon-driver-lxc-1.2.8-1.el7.centos.x86_64
libvirt-daemon-driver-nwfilter-1.2.8-1.el7.centos.x86_64

The PCI-Card I want to passthrough:
02:00.0 Ethernet controller: PLX Technology, Inc. Device 235e
        Subsystem: PLX Technology, Inc. Device 235e
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f0810000 (32-bit, non-prefetchable) [disabled]
[size=256]
        Region 1: I/O ports at e000 [disabled] [size=256]
        Region 2: Memory at e0000000 (32-bit, non-prefetchable) [disabled]
[size=256M]
        Region 3: Memory at f0000000 (32-bit, non-prefetchable) [disabled]
[size=8M]
        Expansion ROM at f0800000 [disabled] [size=64K]
        Capabilities: [40] Power Management version 1
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [48] CompactPCI hot-swap <?>
        Capabilities: [4c] Vital Product Data
                Unknown large resource type 35, will not decode more.
        Kernel driver in use: vfio-pci

Please help.


Best regards

   Michael Weis



PROPRIETARY: This e-mail contains proprietary information some or all of which
may be legally privileged.  It is intended for the recipient only.  If an
addressing or transmission error has misdirected this e-mail, please notify the
authority by replying to this e-mail.  If you are not the intended recipient you
must not use, disclose, distribute, copy, print, or rely on this e-mail.

Pierre Schweitzer

2014-Oct-13 08:04 UTC

head link

Re: [libvirt-users] passthrough of PCI-device

Dear Michael,

Did you activate the Intel IO MMU (or its equivalent for AMD)?
Also, did you load the pci_stub module for Linux? It is mandatory (it
will replace current driver for your passed through hardware).

Cheers,
Pierre

On 10/13/2014 07:54 AM, Weis, Michael (DWIE) wrote:> Good morning,
> 
> there is a typo in my description;
> the line
>      <address domain='0x0' bus='0x1' slot='0x00'
function='0x0'/>
> should be
>      <address domain='0x0' bus='0x2' slot='0x00'
function='0x0'/>
> That was correct in my xml-file.
> 
> Isn't there anybody how can help me with that?
> 
> 
> Regards
> 
>    Michael Weis
> 
> 
> 
> Von: Weis, Michael (DWIE)
> Gesendet: Dienstag, 7. Oktober 2014 11:45
> An: 'libvirt-users@redhat.com'
> Betreff: passthrough of PCI-device
> 
> Hello,
> 
> I try to passthrough a PCI-card to a VM named  testvm
> I want to do that with an xml-file named hga.xml including the following
content:
> 
> <hostdev mode='subsystem' type='pci'
managed='yes'>
>   <source>
>      <address domain='0x0' bus='0x1' slot='0x00'
function='0x0'/>
>   </source>
> </hostdev>
> 
> When I execute
> virsh attach-device testvm hga.xml
> I get the following error:
> Fehler: Fehler beim Anhängen des Geräts von hga.xml
> (error: error while attaching device from hga.xml)
> Fehler: Interner Fehler: Kann Qemu-Befehl 'device_add' nicht
ausführen: Device initialization failed.
> (error: internal error: cannot execute 'device_add':
> 
> In the syslog of the host I get the following errors:
> Oct  7 11:32:34 artemis2 journal: Interner Fehler: Kann Qemu-Befehl
'device_add' nicht ausführen: Device initialization failed.
> Oct  7 11:32:53 artemis2 kernel: ffff880220fadd10 ffffffff810f924a
ffff880220fadd28 0000000000000246
> Oct  7 11:32:53 artemis2 kernel: ffff8800bd07a400 000000007265756d
ffffffffa0866ee0 0000000000000000
> Oct  7 11:32:53 artemis2 kernel: Call Trace:
> Oct  7 11:32:53 artemis2 kernel: [<ffffffff815e237b>]
dump_stack+0x19/0x1b
> Oct  7 11:32:53 artemis2 kernel: [<ffffffff810f924a>]
__setup_irq+0x54a/0x570
> Oct  7 11:32:53 artemis2 kernel: [<ffffffffa0866ee0>] ?
virqfd_wakeup+0xc0/0xc0 [vfio_pci]
> Oct  7 11:32:53 artemis2 kernel: [<ffffffff810f93cc>]
request_threaded_irq+0xcc/0x170
> Oct  7 11:32:53 artemis2 kernel: [<ffffffffa0866b8a>]
vfio_intx_set_signal+0x10a/0x1f0 [vfio_pci]
> Oct  7 11:32:53 artemis2 kernel: [<ffffffffa08670e8>]
vfio_pci_set_intx_trigger+0xc8/0x1b0 [vfio_pci]
> Oct  7 11:32:53 artemis2 kernel: [<ffffffffa086799b>]
vfio_pci_set_irqs_ioctl+0x7b/0x100 [vfio_pci]
> Oct  7 11:32:53 artemis2 kernel: [<ffffffff8115d352>] ?
memdup_user+0x42/0x70
> Oct  7 11:32:53 artemis2 kernel: [<ffffffffa0865e74>]
vfio_pci_ioctl+0x314/0xa00 [vfio_pci]
> Oct  7 11:32:53 artemis2 kernel: [<ffffffff81194b6a>] ?
kmem_cache_alloc+0x1ba/0x1d0
> Oct  7 11:32:53 artemis2 kernel: [<ffffffff811b156c>] ?
get_empty_filp+0x5c/0x190
> Oct  7 11:32:53 artemis2 kernel: [<ffffffff811f1891>] ?
fsnotify+0x251/0x350
> Oct  7 11:32:53 artemis2 kernel: [<ffffffff81251806>] ?
security_file_alloc+0x16/0x20
> Oct  7 11:32:53 artemis2 kernel: [<ffffffff811b15a0>] ?
get_empty_filp+0x90/0x190
> Oct  7 11:32:53 artemis2 kernel: [<ffffffffa084f163>]
vfio_device_fops_unl_ioctl+0x23/0x30 [vfio]
> Oct  7 11:32:53 artemis2 kernel: [<ffffffff811c2af5>]
do_vfs_ioctl+0x2e5/0x4c0
> Oct  7 11:32:53 artemis2 kernel: [<ffffffff811af780>] ?
vfs_write+0x160/0x1e0
> Oct  7 11:32:53 artemis2 kernel: [<ffffffff811c2d71>]
SyS_ioctl+0xa1/0xc0
> Oct  7 11:32:53 artemis2 kernel: [<ffffffff815f2a59>]
system_call_fastpath+0x16/0x1b
> Oct  7 11:32:53 artemis2 journal: Interner Fehler: Kann Qemu-Befehl
'device_add' nicht ausführen: Device initialization failed.
> 
> My version-information:
> OS: CentOS Linux release 7.0.1406 (Core)
> Kernel: Linux artemis2 3.10.0-123.8.1.el7.x86_64
> libvirt-daemon-driver-secret-1.2.8-1.el7.centos.x86_64
> libvirt-1.2.8-1.el7.centos.x86_64
> libvirt-daemon-kvm-1.2.8-1.el7.centos.x86_64
> libvirt-client-1.2.8-1.el7.centos.x86_64
> libvirt-daemon-driver-qemu-1.2.8-1.el7.centos.x86_64
> libvirt-daemon-config-network-1.2.8-1.el7.centos.x86_64
> libvirt-daemon-driver-interface-1.2.8-1.el7.centos.x86_64
> libvirt-daemon-1.2.8-1.el7.centos.x86_64
> libvirt-daemon-driver-nodedev-1.2.8-1.el7.centos.x86_64
> libvirt-daemon-driver-storage-1.2.8-1.el7.centos.x86_64
> libvirt-daemon-config-nwfilter-1.2.8-1.el7.centos.x86_64
> libvirt-daemon-driver-network-1.2.8-1.el7.centos.x86_64
> libvirt-daemon-driver-lxc-1.2.8-1.el7.centos.x86_64
> libvirt-daemon-driver-nwfilter-1.2.8-1.el7.centos.x86_64
> 
> The PCI-Card I want to passthrough:
> 02:00.0 Ethernet controller: PLX Technology, Inc. Device 235e
>         Subsystem: PLX Technology, Inc. Device 235e
>         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
>         Interrupt: pin A routed to IRQ 16
>         Region 0: Memory at f0810000 (32-bit, non-prefetchable) [disabled]
[size=256]
>         Region 1: I/O ports at e000 [disabled] [size=256]
>         Region 2: Memory at e0000000 (32-bit, non-prefetchable) [disabled]
[size=256M]
>         Region 3: Memory at f0000000 (32-bit, non-prefetchable) [disabled]
[size=8M]
>         Expansion ROM at f0800000 [disabled] [size=64K]
>         Capabilities: [40] Power Management version 1
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [48] CompactPCI hot-swap <?>
>         Capabilities: [4c] Vital Product Data
>                 Unknown large resource type 35, will not decode more.
>         Kernel driver in use: vfio-pci
> 
> Please help.
> 
> 
> Best regards
> 
>    Michael Weis
> 
> 
> 
> PROPRIETARY: This e-mail contains proprietary information some or all of
which may be legally privileged.  It is intended for the recipient only.  If an
addressing or transmission error has misdirected this e-mail, please notify the
authority by replying to this e-mail.  If you are not the intended recipient you
must not use, disclose, distribute, copy, print, or rely on this e-mail.
> 
> 
> 
> _______________________________________________
> libvirt-users mailing list
> libvirt-users@redhat.com
> https://www.redhat.com/mailman/listinfo/libvirt-users
> 

-- 
Pierre Schweitzer <pierre@reactos.org>
System & Network Administrator
Senior Kernel Developer
ReactOS Deutschland e.V.

Weis, Michael (DWIE)

2014-Oct-13 10:02 UTC

head link

Re: [libvirt-users] passthrough of PCI-device

Hi Pierre,

thanks for your reply.

I am using kernel 3.10.0-123.8.1.el7.x86_64.
The kernel modul used after nodedev-detach is vfio-pci

This is the output of lspci -vv after I did a virsh nodedev-detatch 
pci_0000_02_00_0

02:00.0 Ethernet controller: PLX Technology, Inc. Device 235e
        Subsystem: PLX Technology, Inc. Device 235e
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f0810000 (32-bit, non-prefetchable) [disabled]
[size=256]
        Region 1: I/O ports at e000 [disabled] [size=256]
        Region 2: Memory at e0000000 (32-bit, non-prefetchable) [disabled]
[size=256M]
        Region 3: Memory at f0000000 (32-bit, non-prefetchable) [disabled]
[size=8M]
        Expansion ROM at f0800000 [disabled] [size=64K]
        Capabilities: [40] Power Management version 1
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [48] CompactPCI hot-swap <?>
        Capabilities: [4c] Vital Product Data
                Unknown large resource type 35, will not decode more.
        Kernel driver in use: vfio-pci


Best regards

   Michael




-----Ursprüngliche Nachricht-----
Von: libvirt-users-bounces@redhat.com [mailto:libvirt-users-bounces@redhat.com]
Im Auftrag von Pierre Schweitzer
Gesendet: Montag, 13. Oktober 2014 10:04
An: libvirt-users@redhat.com
Betreff: Re: [libvirt-users] passthrough of PCI-device

Dear Michael,

Did you activate the Intel IO MMU (or its equivalent for AMD)?
Also, did you load the pci_stub module for Linux? It is mandatory (it will
replace current driver for your passed through hardware).

Cheers,
Pierre

On 10/13/2014 07:54 AM, Weis, Michael (DWIE) wrote:> Good morning,
> 
> there is a typo in my description;
> the line
>      <address domain='0x0' bus='0x1' slot='0x00'
function='0x0'/>
> should be
>      <address domain='0x0' bus='0x2' slot='0x00'
function='0x0'/> That
> was correct in my xml-file.
> 
> Isn't there anybody how can help me with that?
> 
> 
> Regards
> 
>    Michael Weis
> 
> 
> 
> Von: Weis, Michael (DWIE)
> Gesendet: Dienstag, 7. Oktober 2014 11:45
> An: 'libvirt-users@redhat.com'
> Betreff: passthrough of PCI-device
> 
> Hello,
> 
> I try to passthrough a PCI-card to a VM named  testvm I want to do 
> that with an xml-file named hga.xml including the following content:
> 
> <hostdev mode='subsystem' type='pci'
managed='yes'>
>   <source>
>      <address domain='0x0' bus='0x1' slot='0x00'
function='0x0'/>
>   </source>
> </hostdev>
> 
> When I execute
> virsh attach-device testvm hga.xml
> I get the following error:
> Fehler: Fehler beim Anhängen des Geräts von hga.xml
> (error: error while attaching device from hga.xml)
> Fehler: Interner Fehler: Kann Qemu-Befehl 'device_add' nicht
ausführen: Device initialization failed.
> (error: internal error: cannot execute 'device_add':
> 
> In the syslog of the host I get the following errors:
> Oct  7 11:32:34 artemis2 journal: Interner Fehler: Kann Qemu-Befehl
'device_add' nicht ausführen: Device initialization failed.
> Oct  7 11:32:53 artemis2 kernel: ffff880220fadd10 ffffffff810f924a 
> ffff880220fadd28 0000000000000246 Oct  7 11:32:53 artemis2 kernel: 
> ffff8800bd07a400 000000007265756d ffffffffa0866ee0 0000000000000000 Oct  7
11:32:53 artemis2 kernel: Call Trace:
> Oct  7 11:32:53 artemis2 kernel: [<ffffffff815e237b>] 
> dump_stack+0x19/0x1b Oct  7 11:32:53 artemis2 kernel: 
> [<ffffffff810f924a>] __setup_irq+0x54a/0x570 Oct  7 11:32:53 artemis2
> kernel: [<ffffffffa0866ee0>] ? virqfd_wakeup+0xc0/0xc0 [vfio_pci] Oct
> 7 11:32:53 artemis2 kernel: [<ffffffff810f93cc>] 
> request_threaded_irq+0xcc/0x170 Oct  7 11:32:53 artemis2 kernel: 
> [<ffffffffa0866b8a>] vfio_intx_set_signal+0x10a/0x1f0 [vfio_pci] Oct
> 7 11:32:53 artemis2 kernel: [<ffffffffa08670e8>] 
> vfio_pci_set_intx_trigger+0xc8/0x1b0 [vfio_pci] Oct  7 11:32:53 
> artemis2 kernel: [<ffffffffa086799b>] 
> vfio_pci_set_irqs_ioctl+0x7b/0x100 [vfio_pci] Oct  7 11:32:53 artemis2 
> kernel: [<ffffffff8115d352>] ? memdup_user+0x42/0x70 Oct  7 11:32:53 
> artemis2 kernel: [<ffffffffa0865e74>] vfio_pci_ioctl+0x314/0xa00 
> [vfio_pci] Oct  7 11:32:53 artemis2 kernel: [<ffffffff81194b6a>] ? 
> kmem_cache_alloc+0x1ba/0x1d0 Oct  7 11:32:53 artemis2 kernel: 
> [<ffffffff811b156c>] ? get_empty_filp+0x5c/0x190 Oct  7 11:32:53 
> artemis2 kernel: [<ffffffff811f1891>] ? fsnotify+0x251/0x350 Oct  7 
> 11:32:53 artemis2 kernel: [<ffffffff81251806>] ? 
> security_file_alloc+0x16/0x20 Oct  7 11:32:53 artemis2 kernel: 
> [<ffffffff811b15a0>] ? get_empty_filp+0x90/0x190 Oct  7 11:32:53
artemis2 kernel: [<ffffffffa084f163>] vfio_device_fops_unl_ioctl+0x23/0x30
[vfio] Oct  7 11:32:53 artemis2 kernel: [<ffffffff811c2af5>]
do_vfs_ioctl+0x2e5/0x4c0 Oct  7 11:32:53 artemis2 kernel:
[<ffffffff811af780>] ? vfs_write+0x160/0x1e0 Oct  7 11:32:53 artemis2
kernel: [<ffffffff811c2d71>] SyS_ioctl+0xa1/0xc0 Oct  7 11:32:53 artemis2
kernel: [<ffffffff815f2a59>] system_call_fastpath+0x16/0x1b Oct  7
11:32:53 artemis2 journal: Interner Fehler: Kann Qemu-Befehl
'device_add' nicht ausführen: Device initialization failed.
> 
> My version-information:
> OS: CentOS Linux release 7.0.1406 (Core)
> Kernel: Linux artemis2 3.10.0-123.8.1.el7.x86_64
> libvirt-daemon-driver-secret-1.2.8-1.el7.centos.x86_64
> libvirt-1.2.8-1.el7.centos.x86_64
> libvirt-daemon-kvm-1.2.8-1.el7.centos.x86_64
> libvirt-client-1.2.8-1.el7.centos.x86_64
> libvirt-daemon-driver-qemu-1.2.8-1.el7.centos.x86_64
> libvirt-daemon-config-network-1.2.8-1.el7.centos.x86_64
> libvirt-daemon-driver-interface-1.2.8-1.el7.centos.x86_64
> libvirt-daemon-1.2.8-1.el7.centos.x86_64
> libvirt-daemon-driver-nodedev-1.2.8-1.el7.centos.x86_64
> libvirt-daemon-driver-storage-1.2.8-1.el7.centos.x86_64
> libvirt-daemon-config-nwfilter-1.2.8-1.el7.centos.x86_64
> libvirt-daemon-driver-network-1.2.8-1.el7.centos.x86_64
> libvirt-daemon-driver-lxc-1.2.8-1.el7.centos.x86_64
> libvirt-daemon-driver-nwfilter-1.2.8-1.el7.centos.x86_64
> 
> The PCI-Card I want to passthrough:
> 02:00.0 Ethernet controller: PLX Technology, Inc. Device 235e
>         Subsystem: PLX Technology, Inc. Device 235e
>         Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
>         Interrupt: pin A routed to IRQ 16
>         Region 0: Memory at f0810000 (32-bit, non-prefetchable) [disabled]
[size=256]
>         Region 1: I/O ports at e000 [disabled] [size=256]
>         Region 2: Memory at e0000000 (32-bit, non-prefetchable) [disabled]
[size=256M]
>         Region 3: Memory at f0000000 (32-bit, non-prefetchable) [disabled]
[size=8M]
>         Expansion ROM at f0800000 [disabled] [size=64K]
>         Capabilities: [40] Power Management version 1
>                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                 Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [48] CompactPCI hot-swap <?>
>         Capabilities: [4c] Vital Product Data
>                 Unknown large resource type 35, will not decode more.
>         Kernel driver in use: vfio-pci
> 
> Please help.
> 
> 
> Best regards
> 
>    Michael Weis
> 
> 
> 
> PROPRIETARY: This e-mail contains proprietary information some or all of
which may be legally privileged.  It is intended for the recipient only.  If an
addressing or transmission error has misdirected this e-mail, please notify the
authority by replying to this e-mail.  If you are not the intended recipient you
must not use, disclose, distribute, copy, print, or rely on this e-mail.
> 
> 
> 
> _______________________________________________
> libvirt-users mailing list
> libvirt-users@redhat.com
> https://www.redhat.com/mailman/listinfo/libvirt-users
> 

--
Pierre Schweitzer <pierre@reactos.org>
System & Network Administrator
Senior Kernel Developer
ReactOS Deutschland e.V.


______________________________________________________________________
CAUTION: This message was sent via the Public Internet and its authenticity
cannot be guaranteed.

PROPRIETARY: This e-mail contains proprietary information some or all of which
may be legally privileged.  It is intended for the recipient only.  If an
addressing or transmission error has misdirected this e-mail, please notify the
authority by replying to this e-mail.  If you are not the intended recipient you
must not use, disclose, distribute, copy, print, or rely on this e-mail.

Seemingly Similar Threads

Search for more reasonably related threads

libvirt users - Oct 2014 - Re: passthrough of PCI-device

Re: [libvirt-users] passthrough of PCI-device

Re: [libvirt-users] passthrough of PCI-device

Re: [libvirt-users] passthrough of PCI-device

Seemingly Similar Threads